Hand Held Products 7400 - Manuals

1 - 2 Required Safety Labels The Dolphin 7400/7450 mobile computer meets or exceeds the requirements of all applicable standards organizations for safe operation. However, as with any electrical equipment, the best way to ensure safe operation is to know the possible risks. The following safety guid...

1 - 4 FCC Compliance Dolphin 7400/7450 Batch Terminal The Dolphin 7400/7450 Batch complies with part 15 of the FCC rules. Operation is subject to the following two conditions: 1. Devices may not cause harmful interference. 2. Devices must accept any interference received, including interference that...

1 - 5 Regulatory and Safety Agency Approvals The CE mark on the product indicates that the system has been tested to and conforms with the provisions noted within the 89/336/EEC Electromagnetic Compatibility Directive and the 73/23/EEC Low Voltage Directive. Parameter Specification U.S.A. Canada Eur...

1 - 6 Dolphin 7400/7450 RF Cisco 352 R&TTE Compliance Statement The Hand Held Products Dolphin 7400RF and Dolphin 7450RF are in conformity with all essential requirements of the R&TTE Directive (1999/5/EC). This equipment has been assessed to the following standards: This product is marked w...

1 - 7 • Although your battery can be recharged many times, it will eventually be depleted. Replace it after the recommended usage period (about 600 charge/discharge cycles for the 2700 mAh NiMH battery) or if the battery is unable to hold an adequate charge. • If you are not sure the battery or char...

2 - 1 2 Getting Started The Dolphin 7400/7450 is a hand held computer/imager designed for easy, single-handed data collection. The terminal is equipped with a StrongARM 206MHz RISC processor built to run the Windows CE operating system. Dolphin 7400/7450 terminals are available with different types ...

2 - 2 Image Engine Options Dolphin 7400/7450 terminals may be equipped with one of three image engines options: • LX: red or green aimer option scans from 2.0 to 15.0 in. (5.1 to 38.1 cm.) • LR: red or green aimer option scans from 1.9 to 9.4 in. (4.8 to 23.9 cm.) • HD: red or green aimer option sca...

2 - 3 2 Charging the Main Battery and Backup Battery WARNING Use only 2700 mAh NiMH battery packs provided by HHP. The use of any other battery pack in the Dolphin terminal will void your warranty and may result in damage to the Dolphin terminal or battery. WARNING Although the Dolphin 7400/7450 ter...

2 - 4 1. Install the charged battery pack in the Dolphin. 2. The red LED will come on and the green LED will blink for approximately three seconds. DO NOT PRESS ANY KEYS WHILE THE TERMINAL IS BOOTING UP. 3. The terminal will initialize and after a few seconds will display the splash screen shown bel...

2 - 5 • The stylus should be oriented at a 90 degree angle to the screen surface. Press the stylus firmly into the center of the cross-hair target and release. Do not "double-tap" the target. You will be prompted to repeat this process for a total of five targets. Press the <ENTER> key...

2 - 6 Setting the Date/Time Use the Windows CE Date/Time function to set the correct date and time for your Dolphin 7400/7450 terminal. Use the Dolphin 7400/7450 mouse utility to navigate through the screens if your terminal does not have a touchscreen. For more information about the mouse utility, ...

2 - 7 Setting Up Communications with Detectoid™ The Detectoid Communication Utility makes it easier to set-up communications between your PC and Dolphin 7300, 7400 or 7450 terminal. The utility has two components: DetectoidPC for setting up ActiveSync on the PC and DetectoidCE for setting communicat...

2 - 9 DetectoidCE After running DetectoidPC, start Detectoid CE on the Dolphin terminal selecting Start>Programs>HHP>DetectoidCE. DetectoidCE will attempt to find the connection with the PC. If successful, the discovered settings will be saved and the Communications Properties Launch window...

2 - 10 Follow these steps to establish a connection for the first time after configuring the settings: 1. Select Launch ActiveSync in the DetectoidPC window. 2. Start ActiveSync on the Dolphin terminal. Once parameters are configured and saved, you do not need to run DetectoidPC again unless you nee...

3 - 1 3 Dolphin 7400/7450 Overview System Features Processor The Dolphin 7400/7450 with Microsoft Pocket PC terminal is equipped with a StrongARM 206MHz RISC microprocessor that runs on a 100 MHz BUS and is the most powerful Pocket PC platform on the market. Operating System Microsoft Pocket PC is a...

3 - 2 Front Panel Features This section describes features on the Dolphin 7400/7450 terminal front panel. LEDs The red light emitting diode (LED) located at the upper right corner of the LCD display is SCAN LED. This LED illuminates when the user presses the ON/SCAN key and activates the scan engine...

3 - 4 Back Panel Features This section describes features on the back panels of the Dolphin 7400 and Dolphin 7450 terminals. Dolphin 7400 All versions of the 7400 terminal have similar back panels except for the safety labels specific to how the terminal is equipped. Image Engine Dolphin 7400/7450 t...

3 - 7 Rubber Nose Bumpers Rubber bumpers allow the Dolphin 7450 to rest in a stable, nose-down position when the unit is set on a flat surface by the user. Scan Trigger The scan trigger provides comfortable two-finger scan activation. Pistol Grip Handle The comfortable, ergonomic handle is designed ...

3 - 8 Power is fed through the RS-232 communications port. Batteries CAUTION: Use only the 3.6V battery packs provided by HHP. The use of any other battery pack in the Dolphin 7400 terminal will void your warranty and may result in damage to the Dolphin terminal or battery. There are two batteries i...

3 - 9 Setting Critical and Low Battery Points The Dolphin 7400/7450 may be programmed to display warnings when the battery reaches critical and low battery points. There are two entries defined in the registry. The specific settings are: [HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Power] &#...

3 - 10 Charging the Battery Pack You can charge the Dolphin’s main battery pack with one of the following methods: • Place the battery pack in the Dolphin 7400/7450 terminal and then place the terminal in the terminal well of a charging/communication cradle. • Place the battery pack in the Dolphin Q...

4 - 1 4 Using the Dolphin 7400/7450 Mobile Computer Entering Data To enter data, you may: • Use the 35-key, 43-key or 56-key keypads • Use the input panel to enter typed text, either by using the soft keyboard or other input method. • Write directly on the screen. • Draw pictures on the screen. • Co...

4 - 2 Using the Soft Keyboard: 1. Tap the arrow next to the Input Panel button and then Keyboard. 2. On the soft keyboard that is displayed, tap the keys with your stylus. Input Panel Options Tap here if thisis the right word. Soft Keyboard

4 - 3 Using the Letter Recognizer With Letter Recognizer you can write letters using the stylus just as you would on paper. 1. Tap the arrow next to the Input Panel button and then Letter Recognizer. 2. Write a letter in the box. When you write a letter, it is converted to typed text that appears on...

4 - 4 Writing on the Screen In any program that accepts writing, such as the Notes program, and in the Notes tab in Calendar, Contacts, and Tasks, you can use your stylus to write directly on the screen as you would on paper. You can edit and format what you’ve written and convert the information to...

4 - 5 Convert Writing to Text: To use this feature, install Letter Transcriber from the Companion CD. To convert writing to text, tap Tools and then Recognize. If you want to convert only certain words, select them before tapping Recognize on the Tools menu (or tap and hold the selected words and th...

4 - 6 If the conversion is incorrect, you can select different words from a list of alternates or return to the original writing. To do so, tap and hold the incorrect word (tap one word at a time). On the pop-up menu, tap Alternates. A menu with a list of alternate words appears. Tap the word you wa...

4 - 7 Note: You may want to change the zoom level so that you can more easily work on or view your drawing. Tap Tools and then a zoom level. Selecting a Drawing To edit or format a drawing, tap and hold the stylus on the drawing until the selection handle appears. To select multiple drawings, desele...

4 - 8 Using My Text When using Inbox or MSN Messenger, use My Text to quickly insert preset or frequently used messages into the text entry area. To insert a message, tap My Text and tap a message. Note: You can add text after inserting a My Text message before sending it. To edit a My Text message,...

4 - 10 Capturing Images The image-capture process is an intuitive, split-second operation for experienced users. By following the basic guidelines, new users can easily develop their own technique and, with practice, quickly learn to adapt it to different circumstances. Basic steps for acquiring ima...

4 - 11 Software Communication Programs Microsoft ActiveSync In the Dolphin 7400/7450 development environment, Microsoft® ActiveSync® is a tool for developers. It allows Pocket PC devices like the 7400/7450 to connect to and exchange data with a desktop computer. RAS Short for Remote Access Services,...

4 - 12 Using the Cursor Keys Use the cursor keys to navigate around on an application screen. The use of these keys can vary depending on the application. To Use This Cursor Key Press Description Arrow up Moves cursor up one row or line. Arrow down Moves cursor down one row or line. Arrow right Move...

4 - 13 Using the Modifier Keys All three versions of the Dolphin 7400/7450 keyboard feature the standard PC keyboard modifier keys, Alt, Ctl and Shift. For single-handed operation, the Shift key only modifies the next key pressed; it must be pressed and released before each key you wish to modify. F...

4 - 14 Today Screen When you turn on your device for the first time each day (or after 4 hours of inactivity), you’ll see the Today screen. You can also display it by tapping Start and then Today. On the Today screen, you can see at a glance important information for the day. Your day at a glance. T...

4 - 16 Selecting Programs To select a program, tap Start>Programs, then the program name. (You can customize which programs you see on this menu. For information, see “Adjusting Settings,” later in this chapter.) Note: Some programs have abbreviated labels for check boxes and drop-down menus. To ...

4 - 17 Navigation Bar and Command Bar The navigation bar is located at the top of the screen. It displays the active program and current time, and allows you to switch to programs and close screens. Use the command bar at the bottom of the screen to perform tasks in programs. The command bar include...

4 - 18 Notifications Your device reminds you in a variety of ways when you have something to do. For example, if you’ve set up an appointment in Calendar, a task with a due date in Tasks, or an alarm in Clock, you’ll be notified in any of the following ways: • A message box appears on the screen. • ...

5 - 2 Configuring The Dolphin 7400/7450 RF Terminal When you cold-boot the Dolphin 7400/7450 RF terminal, the red LED comes on and the green LED blinks, and after approximately 3 seconds, the welcome screen shown below will appear. Tap the screen or press <Enter> and you will be prompted to ca...

5 - 3 Configuring the Cisco DSSS WLAN Radio The Aironet Client Utility (ACU) enables you to change the configuration parameters of the Cisco DSSS WLAN radio. Exit the HHP demo screen. Go to Start>Programs>Cisco. Tap the Client Utility (ACU) icon and the screen shown below displays. Aironet Cli...

5 - 4 To make changes to Profile0, tap the Edit button and the screen shown below displays. For more information on the radio settings, open Windows>Cisco Setup.htm. Edit Aironet Client Utility Screen

6 - 1 6 Customizing Your Dolphin 7400/7450 You can customize your Dolphin 7400/7450 mobile by adjusting device settings and installing additional software. Adjusting Settings You can adjust device settings to suit the way you work. To see available options, tap Start, Settings, then the Personal or ...

6 - 2 4. Tap the file, such as a *.xip or *.exe file. The installation wizard will begin. Follow the directions on the screen. Adding a Program to the Start Menu Tap Start, Settings, Menus, the Start Menu tab, and then the check box for the program. If you do not see the program listed, you can eith...

7 - 1 7 Applications Microsoft Pocket Outlook includes Calendar, Contacts, Tasks, Inbox, and Notes. You can use these programs individually or together. For example, e-mail addresses stored in Contacts can be used to address e-mail messages in Inbox. Using ActiveSync, you can synchronize information...

7 - 2 To Create an Appointment 1. If you are in Day or Week view, tap the desired date and time for the appointment. 2. Tap New. 3. Using the input panel, enter a description and a location. Tap first to select the field. 4. If needed, tap the date and time to change them. 5. Enter other desired inf...

7 - 3 Using the Summary Screen When you tap an appointment in Calendar, a summary screen is displayed. To change the appointment, tap Edit. Creating Meeting Requests You can use Calendar to set up meetings with users of Outlook or Pocket Outlook. The meeting request will be created automatically and...

7 - 4 Contacts Contacts maintains a list of your friends and colleagues so that you can easily find the information you’re looking for, whether you’re at home or on the road. Using the device infrared (IR) port, you can quickly share Contacts information with other device users. Note: To change the ...

7 - 5 To Create a Contact: 1. Tap New. 2. Using the input panel, enter a name and other contact information. You will need to scroll down to see all available fields. 3. To assign the contact to a category, scroll to and tap Categories and select a category from the list. In the contact list, you ca...

7 - 6 Using the Summary Screen When you tap a contact in the contact list, a summary screen is displayed. To change the contact information, tap Edit. View contact details. Tap to view notes. Tap to change contact information. Contacts Summary Screen

7 - 7 Tasks Use Tasks to keep track of what you have to do. Note: To change the way information is displayed in the list, tap Tools and then Options. Tap to create a new task. Select the sort orderof the list. Indicates high priority. Select the category of tasksyou want displayed in the list. Tap t...

7 - 8 To Create a Task 1. Tap New. 2. Using the input panel, enter a description. 3. You can enter a start date and due date or enter other information by first tapping the field. If the input panel is open, you will need to hide it to see all available fields. 4. To assign the task to a category, t...

7 - 9 Using the Summary Screen When you tap a task in the task list, a summary screen is displayed. To change the task, tap Edit. View task details. View notes. Tap to show and hide additionalsummary information. Tap to change task. Task Summary Screen

7 - 10 Notes Create a written note that captures thoughts, reminders, ideas, drawings, and phone numbers with Notes. To Create a Note: 1. Tap New. Tap to open a note orplay a recording. Tap and hold to displaya pop-up menu of actions. Tap to create a new item. Tap to change the sortorder of the list...

7 - 11 2. Create your note by writing, drawing, or typing. Inbox Use Inbox to send and receive e-mail messages in either of these ways: • Synchronize e-mail messages with Microsoft Exchange or Microsoft Outlook on your desktop computer. • Send and receive e-mail messages by connecting directly to an...

7 - 12 You can work online or offline. When working online, you read and respond to messages while connected to the e-mail server. Messages are sent as soon as you tap Send, which saves space on your device. When working offline, once you’ve downloaded new message headers or partial messages, you ca...

7 - 13 When you receive a message, tap it to open it. Unread messages are displayed in bold. When you connect to your e-mail server or synchronize with your desktop computer, by default, you’ll receive messages from the last five days only, the first 100 lines of each new message, and file attachmen...

7 - 14 Composing Messages 1. Tap New. 2. In the To field, enter an e-mail or SMS address of one or more recipients, separating them with a semicolon, or select a name from the contact list by tapping the Address Book button. All e-mail addresses entered in the e-mail fields in Contacts appear in the...

7 - 15 Folder Behavior with a Direct Connection to an E-mail Server The behavior of the folders you create depends on whether you are using ActiveSync, SMS, POP3, or IMAP4. • If you use ActiveSync, e-mail messages in the Inbox folder in Outlook will automatically be synchronized with your device. Yo...

8 - 1 8 Communications Using ActiveSync Using Microsoft ActiveSync, you can synchronize the information on your desktop computer with the information on your device. Synchronization compares the data on your Dolphin mobile computer with your desktop computer and updates both computers with the most ...

8 - 2 For more information about ActiveSync on your device, switch to ActiveSync, tap Start, and then tap Help. Tap to connect and synchronize. View synchronization status. Tap to synchronize via IR orchange synchronization settings. View connection status. Tap to stop synchronization. ActiveSync

9 - 1 9 Getting Connected You can use your device to exchange information with other mobile devices as well as your desktop computer, a network, or the Internet. You have the following connection options: • Use the infrared (IR) port on your device to send and receive files between two devices. If t...

10 - 1 10 Pocket Internet Explorer Use Microsoft Pocket Internet Explorer to view Web or WAP pages in either of these ways: • During synchronization with your desktop computer, download your favorite links and mobile favorites that are stored in the Mobile Favorites subfolder in Internet Explorer on...

10 - 2 Only items stored in the Mobile Favorites subfolder in the Favorites folder in Internet Explorer on your desktop computer will be synchronized with your device. This folder was created automatically when you installed ActiveSync. Use the Internet Explorer plug-in installed with ActiveSync to ...

10 - 3 Using Pocket Internet Explorer You can use Pocket Internet Explorer to browse mobile favorites and channels that have been downloaded to your device without connecting to the Internet. You can also connect to the Internet through an ISP or a network connection and browse the Web. To View Mobi...

11 - 1 11 Companion Programs The companion programs consist of Microsoft ® Pocket Word, Microsoft ® Pocket Excel, and Microsoft ® Money. Media Player, MSN Messenger, Microsoft Reader are NOT included on the Dolphin 7400/7450 by default but maybe installed from the Microsoft Companion CD. To switch t...

11 - 2 If you’re opening a Word document created on a desktop computer, select Wrap to Window on the View menu so that you can see the entire document. Typing Mode Using the input panel, enter typed text into the document. For more information on entering typed text, see Chapter 2. To format existin...

11 - 3 Writing Mode In writing mode, use your stylus to write directly on the screen. Ruled lines are displayed as a guide, and the zoom magnification is greater than in typing mode to allow you to write more easily. For more information about writing, see Chapter 2 If you cross three ruled lines in...

11 - 4 Drawing Mode In drawing mode, use your stylus to draw on the screen. Gridlines appear as a guide. When you lift your stylus off the screen after the first stroke, you’ll see a drawing box indicating the boundaries of the drawing. Every subsequent stroke within or touching the drawing box beco...

11 - 5 Pocket Excel Pocket Excel works with Microsoft Excel on your desktop computer to give you easy access to copies of your workbooks. You can create new workbooks on your device, or you can copy workbooks from your desktop computer to your device. Synchronize workbooks between your desktop compu...

12 - 1 12 Dolphin Charging/Communication Cradles Hub of the System As the hub of your Dolphin system, Dolphin Charging/Communication cradles perform three important functions – power conditioning, communications and storage. Three versions of the charging/communications cradle are available: • Intel...

12 - 2 Dolphin Charging/Communication Cradle Parts & Functions Front Panel - IntelliBase/USB HomeBase Dolphin Terminal Well Place the Dolphin in this well to communicate with a host device and to charge the Dolphin’s battery. LEDs There are two LEDs on the front panel of the IntelliBase/USB Home...

12 - 3 1. Dock LED Turns solid green when the Dolphin terminal is properly seated into the Dolphin IntelliBase. 2. COMM LED Indicates the status of data transfer between the Host Device and the Dolphin Terminal as described below: IntelliBase+ Dolphin Terminal Well Place the Dolphin in this well to ...

12 - 4 1. Dock LED Turns solid green when the Dolphin Terminal is properly seated into the Dolphin IntelliBase. 2. AUX Battery Indicates charging/calibration status of battery as described below: 3. COMM LED Indicates the status of data transfer between the Host Device and the Dolphin Terminal as de...

12 - 6 USB HomeBase There is a 5V DC power supply connector and a USB connector: Power supply connector Use this connector to attach a power supply to the USB HomeBase. The power supply provides 5V DC input for communications and battery charging. USB Communications Port Use a USB full-speed detacha...

12 - 7 IntelliBase/IntelliBase+ Switch Settings Powering the Dolphin Terminal Dolphin charging/communication cradles provide power to the intelligent battery charging system incorporated into Dolphin terminals. This charging method protects the battery from being damaged by overcharging. Therefore, ...

12 - 8 The IrDA 1.0 software stack is integrated into the IntelliBase and IntelliBase+ cradles to allow communication between the cradle and devices such as modems or printers that are not IrDA ready or do not communicate with a half duplex serial protocol. This allows any full or half duplex RS-232...

12 - 9 Configuring the Dolphin Terminal for Communications The Dolphin terminal may be configured for communications using the Detectoid Communication Utility as described in Chapter 2 or, manually as described below. To set Communications Properties: 1. Select Start>ActiveSync>Tools>Option...

12 - 10 select "Infrared Port (IR)" for the COM port as shown below. To configure the Dolphin 7400/7450 terminal for communications, see the previous section on Configuring the Dolphin Terminal. Setting Up For Communications With The USB HomeBase To use the USB HomeBase, you need the followi...

12 - 12 In the ActiveSync connection settings, add check mark to "Allow serial cable or infrared connection to this COM port" and select "Infrared Port (IR)" for the COM port as shown below. Do not check "Allow USB connection with this desktop computer". It has no effect for ...

12 - 13 Mounting the IntelliBase/USB HomeBase The IntelliBase and USB HomeBase may be desk or wall-mounted for convenience and storage. The IntelliBase+ may be desk-mounted as long as room is allowed for accessibility to the auxiliary battery well. Desk Mounting: Dolphin charging/communication cradl...

13 - 1 13 Dolphin QuadCharger The Dolphin QuadCharger provides intelligent battery management for NiMH (Nickel Metal Hydride) Dolphin 7400/7450 battery packs. This device fully charges as many as four NiMH batteries in 2.5 hours. Charging slots work independently to control charging and discharging ...

13 - 2 Rear Panel Power Supply Connector Use this connector to attach the power supply to the QuadCharger. The universal power supply accepts input voltages between 90-265 volts. Communications Port The communications port is for factory use only in programming the QuadCharger. Charging Batteries In...

13 - 3 LEDs Servicing The Battery Pack To service battery packs, insert batteries into the charging pockets and press the Condition button. The Condition LED will flash during the conditioning cycle. This starts an automatic process in which batteries are completely discharged and then recharged to ...

13 - 4 Troubleshooting If you encounter problems with your Dolphin QuadCharger, refer to chart below for possible solutions. If problems persist, please contact HHP Technical Support. Problem Issue The “CHARGING” LED does not come on when I insert a battery pack into the Dolphin QuadCharger Check th...

14 - 1 14 Dolphin Mobile Charging/Communication Cradles As the hub of Dolphin mobile data collection systems, Dolphin Mobile Charging/Communication cradles perform three important functions – power conditioning, communications and storage. Two versions of the mobile charging/communication cradles ar...

14 - 2 Mobile IntelliBase and Mobile Base Parts and Functions Front Panel The front panel of the Mobile IntelliBase and the Mobile Base has one slot: Terminal Well DOCK LED COMM LED Spring-Arm Assembly

14 - 3 Dolphin Terminal Well Place the Dolphin in the well to communicate with a host device and/or to charge the Dolphin’s battery. LEDs There are two LEDs on the front panels of the Mobile IntelliBase and Mobile Base charging/communication cradles. 1. Dock LED Turns solid green when the Dolphin te...

14 - 6 Bottom Panel of Mobile IntelliBase/Mobile Base A four-position Baud Rate switch, located on the bottom of the Mobile IntelliBase, is used to select the communication baud rate. Switch positions and the corresponding baud rates are shown in the chart below. Baud Rate Table For Connecting To PC...

14 - 7 Setting Up For Communications with the Mobile IntelliBase/Mobile Base The Mobile IntelliBase RS-232 interface allows the Dolphin terminal to communicate to a personal computer, modem, or any standard RS-232 device using a standard serial cable and communications software. The IrDA 1.0 softwar...

14 - 10 Configuring the Dolphin Terminal The Communications Properties must be configured on Dolphin 7400/7450 terminal in order for it to communicate with the Mobile IntelliBase/Mobile Base. To set Communications Properties: 1. Select Start>Settings>Control Panel>Communication Settings. 2....

15 - 1 15 Warranty, Support and Service Limited Warranty Hand Held Products, Inc., d/b/a HHP ("HHP") warrants its products to be free from defects in materials and workmanship and to conform to HHP’s published specifications applicable to the products purchased at the time of shipment. This ...

15 - 2 Return Information If you purchased the product from an Authorized HHP Reseller, contact the Reseller with the unit's serial number. Your Reseller will contact Hand Held, on your behalf, to arrange for the unit to be serviced. If you purchased the product directly from Hand Held, or have been...

15 - 3 Technical Assistance If you have a question or problem with your unit, you can obtain technical assistance from HHP’s Technical Support department. North America/Canada: Telephone: (800) 782-4263, Option 4 (8 a.m. to 6 p.m. EST) Fax number: (315) 685-4960 E-mail: [email protected] Europe, Middl...

16 - 1 16 Appendix A Use the keyboard shortcuts in the chart below to navigate the Dolphin 7400 and 7450 terminal keyboards. Windows Keyboard Shortcuts Press To CTRL + C Copy CTRL + X Cut CTRL + V Paste CTRL + Z Undo DELETE Delete CTRL + RIGHT ARROW Move the insertion point to the beginning of the n...

16 - 2 Using the Modifier Keys The Dolphin 7400/7450 terminal keyboard features the standard Windows modifier keys, Alt, Ctrl and Shift. The Shift key only modifies the next key pressed; it must be pressed before each key you wish to make lower case. For multiple lower case characters, hold the Shif...

16 - 3 * Exit the mouse utility prior to adjusting the contrast. Key Combinations Use the key combinations listed below to access certain keyboard functions or to use special characters that are not defined on the 43-key version of the Dolphin 7400/7450 keyboard. Red key + V F6 Red key + W F7 Red ke...

16 - 4 35 Key Numeric/Alpha Blue + SFT + X | Miscellaneous Key Combinations Key/Key Combinations Function/Special Characters NUM + ALT + 3 + 9* ‘ NUM + ALT + 3 + 4* *Hold the ALT key down as you type in the numbers. “ Blue Key Functions & Characters For 35-Key Numeric/Alpha Keyboard Key Combinat...

16 - 5 Key Combinations Use the key combinations listed below to access certain keyboard functions or to use special characters that are not defined on the 35-key version of the Dolphin keyboard. 56 Key Full Alpha Numeric Key Combinations Using ALPHA & SFT Keys Key/Key Combination Function/Speci...