Haier XQB50-20- Manuals

Page 2 - Names of the par ts; Accessories; Warning sign; Before Using

Adjustable foot Adjustable foot labal Cabinet Base Control panal Control panel film Pulsator Top lid component Power line Location for lint filter Fixed foot(3) Back cover Drain hose Cabinet handle Hanging hole for the drain hose Water absorption cushion Water valve Blance ring Inner tub Names of th...

Page 3 - Do not use water with temperature higher than 50; Earth

Before Using Before Using Safety precautions 1 T h e v e n t i l a t i o nholes at the bottom In case the washing machine is installed on ground with carpet, be careful not to block the ventilation holewith carpet. Do not put the machine at damp place like the bathroom. Never wash it with water. Do ...

Page 5 - Install bottom plate; Push lint filter downward to l; Adjust the adjustable foot:; Adjust the installation position; Hang the lead line to confirm if it is horizontal.

After switching on the Power, select the memory programme(the tube on).Then select appropriate time of SOAK, WASH and SPIN and the time of rinse on need. After setting, the washing machine memorized the programme set by yourself. When switching on the Power again, press the PROGRAM button, and selec...

Page 6 - How to change the direction of the drain hose

1 Loosen the fastening screws of the back cover,unpack the back cover gently, avoiding to break the clip claw. Figure 1 3 Stretch out the drain hose to the right of the frame from the groove. Fasten it in the base frame with the drain hose support, and fasten the screws.Then hangthe hook in the drai...

Page 7 - hose jointer from the water inlet hose component. See to Figure 1.; Confirm the water faucet

Water faucet, suitable Water faucet, not suitable It is required that the front end shall be longer than 10cm.The outlet end surface of the faucet shall be flat and smooth. If not please file it to avoid leakage. 2. Loosen the screw till the water faucet can be accessed. Put the jointer of the water...

Page 8 - Put the nut of the water inlet hose on; Water absorption cushion

1.Do not take off the water absorption cushion. Please check if the cushion is dropped or damaged before each usage. If it happens please contact our after-sale department immediately. 2.Put the nut of the water inlet hose on the valve jointer. 3.Fasten the nut. Swing it gently to confirm if it's su...

Page 9 - Pay attention to followings before washing the laundries

Preparation before washing1. Connect the water inlet hose.2. Confirm that the washing machine is earthed reliably. Then insert the power plug into the receptacle. Do not connect the earth terminal to the gas pipe and tap water pipe.3.Put down the drain hose. Using process Using process 1 Preparation...

Page 10 - Reference weight of the laundries:; single bed sheet; Using process

Reference weight of the laundries: working suit(up,down) Jeans(about 800g) The capacity of washing and spinning of the machine refer to the largest weight of the standard laundries under dry condition (as per the laundries stipulated in the A2 Attachment of GB4288-1992 standard) that can be washed o...

Page 11 - How to use the whitener

Detergent box Softner dispenser Location for liquid bleacher Control panal Fill water to decided level. Dilute the whitener with container. Pour it slowly into the washing tub.Avoid using whitener on laundries with color or pattern as they are prone to lose color.The whitener shall not touch the lau...

Page 12 - SOAK; RINSE button; Indicator light of procedure; Description of the function of the buttons; Flashing: indicate the running program; On: indicate the program about to run, or indicate; WASH; Times; RINSE; Minute; Mode and meaning of the indicator light

When the tube Press the RINSE button to set the process of RINSE.During the NORMAL or COTTON program, press the RINSE button to setdifferent times(1 2 3 4 times). During the QUICK program, press the RINSE button,the washing machine does not response. is on, it indicates that you have chosen the ELIM...

Page 13 - RESERVE button

POWER ON / OFF START PAUSE RESERVE PROGRAM Reserve(hours later) XQB50-20 NORMAL MEMORY Fuzzy ON/OFF button Press the ON/OFF button to switch on the powerAfter the power is on,another press will switch off the power.After the power is on, if not press the START/PAUSE button, the washing machine will ...

Page 15 - the machine will set to SPIN program automatically.; Attention; Spin

Time list of each program WITHOUT SELF-EDIT PROGRAM The soak program can be used as fitting of the STANDARD , COTTON, JEANS and FIBRE automatic programs. Soak with slight stirring before wash. With SOAK Without SOAK Rinse twice, each about 2-3 Rinse thrice, each about 2-3 Rinse twice, each about 2-3...

Page 16 - When selecting SOAK program,; Confirm the reservation program; Push the START/PAUSE button; START; Close the top lid

Using process Using process * ** * Total time: including the normal water inlet time and drain time. Spin time: the time from intermittent running to finishing When selecting SOAK program, first soak for 10-40 minutes, then do wash, rinse, spin. The total washing time may be influenced by the water ...

Page 18 - Trouble-shooting Answer to question; The top lid is not closed

Are the laundries put slantingly inspinning? Is the water pressure too low? Is the screw of the jointer of water inlet hose loose or awry? The water tap leaks There's abnormal sound inside the machine Fasten the screw of the jointer properly. The machine does not act Is the power plug inserted tight...

Page 19 - Packing list

Packing list 17 User's manual Name Warranty card Quantity Storage position Lint filter Inside the document bag Bottom plate One One One One Five One Inside the document bag Inside the document bag Inside the accessory bag Between the upper cushion of the washing machine package and the upper seal of...

Page 20 - Model

Specification Specification Model XQB50-20 Rated voltage frequency 220V-240V/ 50Hz Rated washing / spinning capacity 5 .0kg (weight of standard dry cloth) Water level/Water quantity (about) Max water consumption Injection pressure 0.03Mpa~0.78Mpa Rated washing power 350W Rated spinning power 255W We...