Haier WD-9999-14- Manuals

English English safety instructions Avoid fire hazard or electric shock. Do not use an extension cord or an adapter plug. Do not remove any prong from the power cord. WARNING Do not, under any circumstances, cut, remove, or bypass the grounding prong. Grounding type wall receptacle Power supply cord...

PAGE SAFETY INSTRUCTIONS ............................................................ 1-2 PARTS AND FEATURES ............................................................. 4-5 OPERATING YOUR WASHER ................................................. 6-11 UNPACKING AND ACCESSORIES INVENTORY ...............

Unpacking 1. Remove all packing materials. This includes the foam base and all adhesive tape holding the washer accessories inside and outside. Slide out and remove the bottom Styrofoam that is used to protect the washer from shipping damage due to vibrations and shock. 2. Inspect and remove any rem...

1. Top Lid2. Control Panel 3. Washer Cabinet4. Front Leveling Leg (or for Caster) 5. Cabinet Handle (located on both sides of the washer) 6. Control panel 7. Water Inlet Fitting 8. Water Absorption Cushion 9. Water Level Selector 10. Power Cord Holder Clip 11. Drain Hose 12. Power Cord (120 Volt / 6...

English English control panel STATUS HEAVY CYCLE QUICK WASH NORMAL 1. Cycle Button Choose washing cycle Normal - Normal Wash Heavy - Huge and heavy garments Quick Wash - Small loads that are slightly soiled 2. Status Incicator Lights Indicates cycle chosen with stages of cycle in operation. 3. Start...

1. Locate the best place for using your NEW compact portable washer. Make sure it is near a 120 volt outlet and a water source, like a sink, with a drain. 2. Screw on the bottom plate with the six (6) screws provided. 3. Connect the water inlet hose, Using the Quick connect fi tting, or directly con...

29-15/16” 17-1/4” 17-5/8” 38-5/8” 17-1/4” 17-5/8” Unit Dimensions • Select a suitable location for the washer on a hard even surface away from direct sunlight and heat sources (e.g., radiators, baseboard heaters, cooking appliances, etc.). • Verify the compact washer’s measurement with the location ...

Leveling the Washer Your washer has an adjustable leveling leg that is located on the front right corner. After properly placing your washer in its final location, you must level the washer. Warning! An "off-balance" washer will not function properly and can stop. Using a level is best pract...

As a second option, you can install directly to a fixed utility hot and cold water outlet by using a “Y Hose” (NOT suppliered) . To washer inlet English English Installing Your Washer Read the installation instructions carefully and ensure washer location before beginning. Installing Quick Sink Adap...

Installing the Lint Filter The lint filter must be installedbefore the washer is used.The lint filter is packagedwith the User Manual. 7. Make sure the lint filter is installed. The lint filter must be installed before the washer is used. The lint filter is packaged with the User Manual. 8. Plug in ...

Power ON/OFF: (1) • Press the POWER button once to turn ON the power to the washer. Press it again to turn the power OFF. Start/Pause: (2) • Press this button once to start the wash process. Press this button once again to pause the activity during the wash cycle. Push it again to resume the wash cy...

STATUS NORMAL Power Selecting the Wash Cycle When you first turn on the POWER, the washer will automactically be set for the NORMAL wash cycle , for Wash, Rinse & Spin. The LED indicators with be lit, to show cycle program. Power ON Wash, Rinse & Spin Normal Wash S t a r t Pause Then press t...

End-of-Cycle Signal The machine will beep at the end of the cycle, indicating that the washing is complete. The “Wash/Rinse/Spin” indicator lights will still be ON. The washer will turn OFF automatically in approximately 10 minutes after the completion of the cycle. Closing the Top Lid For safety pu...

Loading the Washer • Load each item loosely. • Separate the white from the colored clothing. Separate heavy fabrics from light fabrics. • Carefully check all pockets and cuffs for foreign items. They can easily slide into the tub and cause damage to the tub and/or make disturbing noises during cycle...

Warning! Always unplug your appliance before cleaning to avoid electric shock. Ignoring this warning may result in personal injury or death. Before using cleaning products, always read and follow the cleaning product manufacturer’s instructions and warnings to avoid personal injury and product damag...

English English 22 Normal Operating Sounds The following sounds are normally heard during the operation of the washer:• Tumbling sounds can be heard as heavy wet clothes in the washer are tossed around continuously. • Air rushing noise is the result of the washtub spinning at a very high RPM.• Click...

Before calling for service, determine the symptoms and follow the suggested solutions: Washer does not operate: • Check if the unit is plugged in. The plug may have come loose.• Check if the electrical wall receptacle is of proper voltage. • Check if the circuit breaker needs to be reset or if the f...

English English Problems with clothing: • Clothes are too wrinkled – Clothes have been improperly sorted or the machine has been overloaded. Do not mix heavy clothes such as work clothes with light clothes such as blouses, light shirts and delicate items. • Clothes have soap residue – The detergent ...

In Home ServiceFull ONE Year Warranty For 12 months from the date of original retail purchase, Haier will repair or replace any part free of charge including labor that fails due to a defect in materials or workmanship. Limited Warranty After one year from the original retail purchase date, Haier wi...

120 V, 60 Hz Made in China Fabriqué en Chine Hecho en China Haier America New York, NY 10018 Printed in China HLP021-WM 100421 1107 IMPORTANT Do Not Return This Product To The Store If you have a problem with this product, please contact the “Haier Customer Satisfaction Center” at 1-877-337-3639. DA...

English English safety instructions Avoid fire hazard or electric shock. Do not use an extension cord or an adapter plug. Do not remove any prong from the power cord. WARNING Do not, under any circumstances, cut, remove, or bypass the grounding prong. Grounding type wall receptacle Power supply cord...

PAGE SAFETY INSTRUCTIONS ............................................................ 1-2 PARTS AND FEATURES ............................................................. 4-5 OPERATING YOUR WASHER ................................................. 6-11 UNPACKING AND ACCESSORIES INVENTORY ...............

Unpacking 1. Remove all packing materials. This includes the foam base and all adhesive tape holding the washer accessories inside and outside. Slide out and remove the bottom Styrofoam that is used to protect the washer from shipping damage due to vibrations and shock. 2. Inspect and remove any rem...

1. Top Lid2. Control Panel 3. Washer Cabinet4. Front Leveling Leg (or for Caster) 5. Cabinet Handle (located on both sides of the washer) 6. Control panel 7. Water Inlet Fitting 8. Water Absorption Cushion 9. Water Level Selector 10. Power Cord Holder Clip 11. Drain Hose 12. Power Cord (120 Volt / 6...

English English control panel STATUS HEAVY CYCLE QUICK WASH NORMAL 1. Cycle Button Choose washing cycle Normal - Normal Wash Heavy - Huge and heavy garments Quick Wash - Small loads that are slightly soiled 2. Status Incicator Lights Indicates cycle chosen with stages of cycle in operation. 3. Start...

1. Locate the best place for using your NEW compact portable washer. Make sure it is near a 120 volt outlet and a water source, like a sink, with a drain. 2. Screw on the bottom plate with the six (6) screws provided. 3. Connect the water inlet hose, Using the Quick connect fi tting, or directly con...

29-15/16” 17-1/4” 17-5/8” 38-5/8” 17-1/4” 17-5/8” Unit Dimensions • Select a suitable location for the washer on a hard even surface away from direct sunlight and heat sources (e.g., radiators, baseboard heaters, cooking appliances, etc.). • Verify the compact washer’s measurement with the location ...

Leveling the Washer Your washer has an adjustable leveling leg that is located on the front right corner. After properly placing your washer in its final location, you must level the washer. Warning! An "off-balance" washer will not function properly and can stop. Using a level is best pract...

As a second option, you can install directly to a fixed utility hot and cold water outlet by using a “Y Hose” (NOT suppliered) . To washer inlet English English Installing Your Washer Read the installation instructions carefully and ensure washer location before beginning. Installing Quick Sink Adap...

Installing the Lint Filter The lint filter must be installedbefore the washer is used.The lint filter is packagedwith the User Manual. 7. Make sure the lint filter is installed. The lint filter must be installed before the washer is used. The lint filter is packaged with the User Manual. 8. Plug in ...

Power ON/OFF: (1) • Press the POWER button once to turn ON the power to the washer. Press it again to turn the power OFF. Start/Pause: (2) • Press this button once to start the wash process. Press this button once again to pause the activity during the wash cycle. Push it again to resume the wash cy...

STATUS NORMAL Power Selecting the Wash Cycle When you first turn on the POWER, the washer will automactically be set for the NORMAL wash cycle , for Wash, Rinse & Spin. The LED indicators with be lit, to show cycle program. Power ON Wash, Rinse & Spin Normal Wash S t a r t Pause Then press t...

End-of-Cycle Signal The machine will beep at the end of the cycle, indicating that the washing is complete. The “Wash/Rinse/Spin” indicator lights will still be ON. The washer will turn OFF automatically in approximately 10 minutes after the completion of the cycle. Closing the Top Lid For safety pu...

Loading the Washer • Load each item loosely. • Separate the white from the colored clothing. Separate heavy fabrics from light fabrics. • Carefully check all pockets and cuffs for foreign items. They can easily slide into the tub and cause damage to the tub and/or make disturbing noises during cycle...

Warning! Always unplug your appliance before cleaning to avoid electric shock. Ignoring this warning may result in personal injury or death. Before using cleaning products, always read and follow the cleaning product manufacturer’s instructions and warnings to avoid personal injury and product damag...

English English 22 Normal Operating Sounds The following sounds are normally heard during the operation of the washer:• Tumbling sounds can be heard as heavy wet clothes in the washer are tossed around continuously. • Air rushing noise is the result of the washtub spinning at a very high RPM.• Click...

Before calling for service, determine the symptoms and follow the suggested solutions: Washer does not operate: • Check if the unit is plugged in. The plug may have come loose.• Check if the electrical wall receptacle is of proper voltage. • Check if the circuit breaker needs to be reset or if the f...

English English Problems with clothing: • Clothes are too wrinkled – Clothes have been improperly sorted or the machine has been overloaded. Do not mix heavy clothes such as work clothes with light clothes such as blouses, light shirts and delicate items. • Clothes have soap residue – The detergent ...

In Home ServiceFull ONE Year Warranty For 12 months from the date of original retail purchase, Haier will repair or replace any part free of charge including labor that fails due to a defect in materials or workmanship. Limited Warranty After one year from the original retail purchase date, Haier wi...

120 V, 60 Hz Made in China Fabriqué en Chine Hecho en China Haier America New York, NY 10018 Printed in China HLP021-WM 100421 1107 IMPORTANT Do Not Return This Product To The Store If you have a problem with this product, please contact the “Haier Customer Satisfaction Center” at 1-877-337-3639. DA...