Haier HWM75-7288 - Manuals - manualsarea.com

Page 2 - Safety precautions; FORBIDDING; Meaning and description of the symbols

2 Safety precautions Contents marked with that symbol are actions forbidden to perform. Performing of those actions may result in damage of the machine or injure the personal safety of the user. FORBIDDING Contents marked with that symbol are related to the safety of the product and the personal saf...

Page 5 - Installation and adjustment

5 Installation and adjustment Please install and adjust the machine according to the requirement of the manual. It is very important to your security and correct operating the machine. Adjust the adjustable foot: To twist the adjustable foot, please ﬁ rst lift up the side of the foot slightly, and t...

Page 6 - Confirm the water faucet

6 Screw knife Figure 4 Figure 5 About 4mm before twisting About less than 2mm after twisting Screw B u s h i n g S i g n p l a t e S c r e w n u t Figure 2 Figure 3 Figure 6 2. Loosen the screw till the water faucet can be accessed. Put the jointer of the water inlet hose on the faucet. See to Figur...

Page 7 - D i s m a n t l e t h e w a t e r i n l e t h o s e; Connection between the water inlet hose and the washer

1. Do not take off the water absorption cushion. Please check if the cushion is dropped or damaged before each usage. If it happens please contact our after-sale department immediately. 2.Put the nut of the water inlet hose on the valve jointer. 3.Fasten the nut. Swing it gently to confirm if it's s...

Page 8 - The drain hose shall drain smoothly.; How to change the direction of the drain hose

8 The drain hose shall drain smoothly. Do not trample or press the drain hose. 2. The height of the drain hose shall be lessthan 10cm , or the drainage will not be smooth,and cost such long time that the machine maystop at mid way. 1. 3. 5. 4. If the drain hose is too long, cut it at midpoint. To ma...

Page 9 - Preparation before washing; Pay attention to followings before washing the laundries

9 Preparation before washing Connect the water inlet hose. Open the water faucet. Conﬁ rm that the washing machine is earthed reliably. Then insert the power plug into the receptacle. The earth terminal shall notlink to gas pipeline and faucet water pipeline. Put down the drain hose. Slanting or une...

Page 10 - How to use the softener

10 How to use the whitener How to use the washing powder and Softner Fill water to decided level. Dilute the whitener with container. Pour it slowly into thewashing tub. Avoid using whitener on laundries with color or pattern as they are prone to lose color. The whitener shall not touch the laundrie...

Page 11 - Use the operation buttons

11 Use the operation buttons Of f On: indicate the program about to run,or indicate the selected mode or indicate the water level Flashing: indicate the running program It displays “- -” during detecting. It displays total remained time during the running program (min).It displays l remained reser v...

Page 12 - Confi rm the operation of reserve program

12 Push “ ” button to switch on the power Push “ ” button, select suitable water level Push “ ” button to select suitable reserve wash program Push “ ” button to select suitable automatic program After the power is switched on, “SOAK” is automatically set. To select other fully-auto program, please ...

Page 13 - Disposal after washing; Clean the detergent box and set it onthe control panel seat.

13 Disposal after washing Please ﬁrst pull off the power plug from the receptacle before cleaning. After using, please clean the lint and foreign materials of the lint ﬁlter and over ﬂow ﬁlter in time. Other wise it may inﬂuence your using the machine. 1 1 2 2 3 4 The method of dismantle: Push it up...

Page 14 - Trouble-shooting Answer to question; Phenomenan

14 Trouble-shooting Answer to question Phenomenan The reason How to settle The digitron displays E0. The top lid is opened during reser ve procedure. Close the top lid. The drainage cannot work, or is too slow. The digitron displays E1. Is the drain hose blocked? Clean the foreign material. Open and...

Page 15 - Specifi cation; Phenomena

Speciﬁ cation Rated voltage/Frequency 220-240V ~ /50Hz Water level / Water quantity (about) 1/12L, 2/18L, 3/24L, 4/30L, 5/35L, 6/40L, 7/45L,8/50L Injection pressure 0.03 MPa ~ 1.0 MPa Washing/Spinning capacity 7.5kg/7.5kg Phenomena Explanation The spinning is intermittent when it star ts. Balance th...