Haier HWM60-918NZP - Manuals

Page 2 - Safety precautions; Forbidden sign; Meaning and description of the symbols

2 Safety precautions Contents marked with that symbol are actions forbidden to perform. Performing of those actions may result in damage of the machine or injure the personal safety of the user. Forbidden sign Contents marked with that symbol are related to the safety of the product and the personal...

Page 5 - Installation and adjustment

5 Installation and adjustment Please install and adjust the machine according to the requirement of the manual. It is very important to your security and correct operating the machine. 1. move the control handle of trundle to the point 1 and the control handle fix on the second reference column; the...

Page 6 - Confirm the water faucet

6 Screw knife Figure 4 Figure 5 About 4mm before twisting About less than 2mm after twisting Screw B u s h i n g S i g n p l a t e S c r e w n u t Figure 2 Figure 3 Figure 6 2. Loosen the screw till the water faucet can be accessed. Put the jointer of the water inlet hose on the faucet. See to Figur...

Page 7 - D i s m a n t l e t h e w a t e r i n l e t h o s e; Connection between the water inlet hose and the washer

1. Do not take off the water absorption cushion. Please check if the cushion is dropped or damaged before each usage. If it happens please contact our after-sale department immediately. 2.Put the nut of the water inlet hose on the valve jointer. 3.Fasten the nut. Swing it gently to confirm if it's s...

Page 8 - The drain hose shall drain smoothly.; How to change the direction of the drain hose

8 The drain hose shall drain smoothly. Do not trample or press the drain hose. 2 The height of the drain hose shall be lessthan 10cm , or the drainage will not be smooth,and cost such long time that the machine maystop at mid way. 1 3 5 4 If the drain hose is too long, cut it at midpoint. To make sm...

Page 9 - Preparation before washing; Pay attention to followings before washing the laundries

9 Preparation before washing Connect the water inlet hose. Open the water faucet. Conﬁ rm that the washing machine is earthed reliably. Then insert the power plug into the receptacle. The earth terminal shall notlink to gas pipeline and faucet water pipeline. Put down the drain hose. Slanting or une...

Page 11 - Use the operation buttons

11 Use the operation buttons Of f On: indicate the program about to run,or indicate the selected mode or indicate the water level Flashing: indicate the running program During sensing, it displays “- -” .During delay procedure, it displays the remained delay time (in hours). During operation of prog...

Page 13 - Confi rm the operation of “DELAY” program; Disposal after washing

13 Push the “ ” button, select suitable water level Push the “ ” button to select suitable delay wash program After switching on the power, when select the standard program,the washing machine will execute fuzzy program automatically to detect the cloth .After detection, it can set the water level a...

Page 15 - Trouble-shooting Answer to question; Phenomena

15 Trouble-shooting Answer to question Phenomena The reason How to settle The digitron displays E0. The top lid is open during reser ve procedure. Close the top lid. The drainage cannot work, or is too slow. The digitron displays E1. Is the drain hose put down?Is the drain hose blocked? Put down the...

Page 16 - Specifi cation

Speciﬁ cation Water level / Water quantity (about) LEVEL 1/12L, LEVEL 2/18L, LEVEL 3/24L, LEVEL 4/29L,LEVEL 5/33L, LEVEL 6/37L, LEVEL 7/41L, LEVEL 8/46L Injection pressure 0.001 MPa —1.0 MPa Washing / Spinning capacity 6.0kg/6.0kg Phenomena Explanation The spinning is intermittent when it star ts. B...