Haier HWM60-113S- Manuals

Page 2 - Contents

Contents Safety precautions Installation and adjustment Preparation before washing The musts in washing Usage of the detergent Washing sequence Disposal after washing Packing list *Specification Names of the parts Trouble-Shooting *Answers to question

Page 3 - Meaning and description of the symbols; Warning sign; Names of the parts; Packing list

1 Meaning and description of the symbols Warning sign Forbidding sign Contents marked with that symbol are related to the safety of the product and the personal safety of the users. Please operate in strictconformity to the contents, otherwise it may cause damage of the machine or injure thepersonal...

Page 4 - Trouble-shooting Answer to question; Phenomena The reason; Safety precautions

15 Trouble-shooting Answer to question (If there's breakdown, please pull off the power plug before checking) The following phenomena are not breakdowns sometimes. Please confirm again before sending it to repair. If there are real breakdowns, please come to the special maintenance department or aft...

Page 5 - Trouble-shooting Answers to question; When the remained water is frozen

14 Trouble-shooting Answers to question When the remained water is frozen If the laundries fall to the outer side of the spin tub,please take them out immediately. 1.DismantleAs indicated in the figure, push the point marked with " " to pull the spin tub frame to oblique upwards to dismantle...

Page 6 - Installation and adjustment; Install the lint filter; The drainage shall be smooth with the drain hose.; Cleaning the overflow filter

Overflow filter Lint filter If the extra hose is too long, cut it eitherat point A or B. <10cm B A > 30mm <1.5m 4 Installation and adjustment Please install and adjust the machine according to the requirement ofthe manual. It is very important to your security and correct operating the mach...

Page 7 - How to change the direction of the drain hoses; Install the water inlet hose Select the water level; Cleaning the lint filter; Disposal after washing

5 How to change the direction of the drain hoses Figure 1 indicates the ex factory installationposition of the drain hose. Put soft items on the ground. Lean the machine down gently with the front surface facing the ground. Take off the drain hose from the cabinet.Take the hose out of the fixing gro...

Page 8 - Preparation before washing; Spinning

6 Preparation before washing1.Connect the water inlet hose.2.Confirm that the washing machine is earthed reliably . Then insert the power plug into the receptacle. Do not connect the earth terminal to the gas pipe and tap water pipe.3.Put down the drain hose . 4.Slanting or uneven ground may result ...

Page 9 - The musts in washing; How to use the whitener; How to use the washing powder; Usage of the detergent; Rinse with stored water; Rinsing

7 The capacity of washing and spinning of the machine refer to the largest weight of thestandard laundries under dry condition that can be washed or spinned in one time. Laundriesquantity in one washing cycle shall be lowerthan the rated capacity. The wash standard capacity of this machine is 5.8 kg...

Page 10 - Washing sequence; Wash; Midway spinning; Put the laundries into the spin tub evenly and smoothly.

8 Washing sequence Figure 1 Spin timer Wash timer Wash selector (To set to below 2 minute, first set to 5 minute then turn it back. it can increase the service life of the timer). (standard current, strong current) (to set to below 1 minute, first set to 2 minute then turn it back. it can increase t...