Haier HSU-09CG13- Manuals

Page 2 - Cautions

Before disposing an old air conditioner that goes out of use, please make sure it's inoperative and safe. Unplug the air conditioner in order to avoid the risk of child entrapment. It must be noticed that air conditioner system contains refrigerants, which require speciali- zed waste disposal. The v...

Page 3 - Specifications

For the purpose of the safety,the air con- ditioner must be properly grounded in acco- rdance with specifications. Always remember to unplug the air conditioner before openning inlet grill. Never unplug your air conditioner by pulling on the power cord. Always grip plug firmly and pull straight out ...

Page 4 - The machine is adaptive in following situation

3 1.Applicable ambient temperature range: The machine is adaptive in following situation Cautions 3. If the fuse on PC board is broken please change it with the type of T. 3.15A/250V. 4. The distance between the indoor unit and the floor should be more than 2m. 5. The wiring method should be in line...

Page 5 - Parts and Functions; Indoor Unit

4 Parts and Functions Remote signal receiver Operation mode indicator Timer mode indicator Power indicator Vertical flap Air filter Inlet grille Emergency switch(manual) Test running switch(manual) Use remote controller toadjust up and down air flow.(Don't adjust it manually.) Lights up when unit st...

Page 6 - Clock set

5 Hints After replacing with new batteries, remote controller will conduct self-check, displaying all information on LCD. Then, it will become normal. Clock set When unit is started for the first time and after replacing batteries in remote controller, clock shouldbe adjusted as follows:Press CLOCK ...

Page 7 - Operation; Power failure resume(please set and apply as necessary)

6 Operation When in use, put the signal transmission head directly to the receiver hole on the indoor unit. The distance between the signal transmission head and thereceiver hole should be within 7 m without any obstacle as well. Don't throw the controller, prevent it from being damaged. When electr...

Page 8 - Auto run, Fan operation

7 Operation (4) Unit stop (1) Unit start mode changes as follows: Press ON/OFF button, unit starts. Previous operation status appears on display. (Not Timer setting) Power indicator on indoor unit lights up. (2) Select operation mode Press MODE button. For each press, operation AUTO COOL DRY HEAT FA...

Page 9 - COOL,HEAT and DRY operation

Operation Press MODE button. For each press, operation Recommendations: 8 COOL,HEAT and DRY operation Use COOL in summer. Use HEAT in winter Use DRY in spring, autumn and in damp climate. (1) Unit start mode changes as follows: Press ON/OFF button, unit starts.Previous operation status appears on di...

Page 11 - TIMER Operation; To cancel TIMER mode

10 Operation TIMER Operation You can let unit start or stop automatically at following times: Before you wake up in themorning, or get back from outside or after you fall asleep at night. Set Clock correctly before starting Timer operation TIMER ON/OFF Power indicator on indoor unit lights up. (1)Af...

Page 13 - Emergency and Test Operation

Pi Pi...Pi 12 Emergency and Test Operation Use this operation only when the remote controller is defective or lost. When the emergency operation switch is pressed,the" Pi "sound is heard once, whichmeans the start of this operation. In this operation, it is possible to change thesettings of ...

Page 14 - Comfortable SLEEP

13 Comfortable SLEEP Operation In COOL mode sleep in selected mode. Before going to bed at night, you can simply pressthe SLEEP button and unit will bring you a sound One hour after SLEEP mode starts, temp. will become 1 o C higher than temp. setting. After running for another 1 hour, temp. rises by...

Page 15 - Maintenance

14 Maintenance Different models have different appearance Cleaning of unit casing Cleaning of remote controller Cleaning of air filter Cut off power supply before cleaning unit casing with soft cloth. In case of heavy stain, clean it with neutral detergent. squeeze water in the cloth, wipe off the d...

Page 16 - Better use of air conditioner; Never fail to observe the followings

15 Maintenance Better use of air conditioner Proper room temperature. Cleaning of the air filter. Effective use of the timer. Closing of doors and windowsduring operation Never fail to observe the followings Do not sprinkle water over the unit. Do not block the inlet or outlet. Do not pull power plu...

Page 17 - Trouble shooting

16 Trouble shooting Before asking for service, check the following first. NormalPerformanceinspection Noise is heard Phenomenon Cause or check points The system does not restartimmediately. Smells are generated. Mist or steam are blown out. Multiple check Does not work at all. Poor cooling Applicati...