Haier HDW201WH- Manuals

Before placing the dishes in the dishwasher, remove larger food particles to prevent the filter from becoming clogged. If the pots and pans have baked-on food that is extremely hard to remove, we recommend that they are soaked before washing. This will eliminate the need for extra wash cycles. Pull ...

Starting a Wash Cycle After completing the installation, turn on the water and press the ON / OFF button (A) located on the control panel. The indicator light "B" will come on indicating that the appliance is on, but you must wait a few seconds before programming the cycle. Selecting a Wash ...

CYCLE TYPE OF LOAD DESCRIPTION OF CYCLE DETERGENT RINSE AID Normal Wash Normal load of dirty dishes, pots and pans without dried on residue Cold pre-wash Extended 50 ° C wash Cold rinse Hot 6 0 ° C rinse Drying 30 g * Intensive Wash Very dirty dishes, pots and pans. (Not to be used with delicate ite...

Filter Assembly For best performance and results, the filter assembly must be kept clean. The filter efficiently removes food particles from the wash water, allowing it to be recirculated during the cycle. For this reason, it is a good idea to remove the larger food particles trapped in the filter a...

Positioning the Appliance Position the appliance in the desired location. The back should rest against the wall behind it, and the sides, along the adjacent cabinets or wall. The dishwasher is equipped with water supply and drain hoses that can be positioned to the right or the left to allow correct...

Before placing the dishes in the dishwasher, remove larger food particles to prevent the filter from becoming clogged. If the pots and pans have baked-on food that is extremely hard to remove, we recommend that they are soaked before washing. This will eliminate the need for extra wash cycles. Pull ...

Starting a Wash Cycle After completing the installation, turn on the water and press the ON / OFF button (A) located on the control panel. The indicator light "B" will come on indicating that the appliance is on, but you must wait a few seconds before programming the cycle. Selecting a Wash ...

CYCLE TYPE OF LOAD DESCRIPTION OF CYCLE DETERGENT RINSE AID Normal Wash Normal load of dirty dishes, pots and pans without dried on residue Cold pre-wash Extended 50 ° C wash Cold rinse Hot 6 0 ° C rinse Drying 30 g * Intensive Wash Very dirty dishes, pots and pans. (Not to be used with delicate ite...

Filter Assembly For best performance and results, the filter assembly must be kept clean. The filter efficiently removes food particles from the wash water, allowing it to be recirculated during the cycle. For this reason, it is a good idea to remove the larger food particles trapped in the filter a...

Positioning the Appliance Position the appliance in the desired location. The back should rest against the wall behind it, and the sides, along the adjacent cabinets or wall. The dishwasher is equipped with water supply and drain hoses that can be positioned to the right or the left to allow correct...