Haier HCF-210- Manuals

1 . Temperature Control Adjustment 2 . Fast Freeze Switch (yellow light ) 6.Exterior Drain Plug 7.Lock and Key 8 . L i g h t 9.Handle 3 . Power- On Indicator (green light) 4. Vinyl Coated Wire Basket 5. Interior Drain Plug (see insert) Parts And Features 4 4

5 1. Remove all packaging material. This includes the foam base and all adhesive tape holding the freezer accessories inside andoutside. 2. Inspect and remove any remains of packing, tape or printed materials before powering on the freezer. Your freezer is designed for freestanding installation only...

7 Once the freezer is in its proper place, plug it in an electrical outlethaving 220 volts and 15 amps.Set the temperature, on the temperature control knob. "1" being thewarmest and "III" being the coldest. Initially set the temperature on "II"Place food inside the freezer (g...

Defrosting and Draining The Freezer Defrost whenever the frost becomes 1/4" thick. Never use a sharp or metallic instrument to remove the frost as it may damage the cooLing coils. (A punctured coil will void the warranty ) Turn the temperature control to OFF position and unplug the unit.For drai...

To avoid electric shock always unplug yourfreezer before cleaning. Ignoring this warning mayresult in death or injury. Warning: Caution: General: Prepare a cleaning solution of 3-4 tablespoons ofbaking soda mixed with warm water. Use sponge orsoft cloth, dampened with the cleaning solution, towipe d...

Check if thermostat control is not in the "OFF" position.Check if freezer is plugged in.Check if there is power at the ac outlet, by checking the circuit breaker.Wait for 30-40 minutes to see whether freezer will start. Compressorcycle must be complete to operate. Freezer Does Not Operate: F...

1 . Temperature Control Adjustment 2 . Fast Freeze Switch (yellow light ) 6.Exterior Drain Plug 7.Lock and Key 8 . L i g h t 9.Handle 3 . Power- On Indicator (green light) 4. Vinyl Coated Wire Basket 5. Interior Drain Plug (see insert) Parts And Features 4 4

5 1. Remove all packaging material. This includes the foam base and all adhesive tape holding the freezer accessories inside andoutside. 2. Inspect and remove any remains of packing, tape or printed materials before powering on the freezer. Your freezer is designed for freestanding installation only...

7 Once the freezer is in its proper place, plug it in an electrical outlethaving 220 volts and 15 amps.Set the temperature, on the temperature control knob. "1" being thewarmest and "III" being the coldest. Initially set the temperature on "II"Place food inside the freezer (g...

Defrosting and Draining The Freezer Defrost whenever the frost becomes 1/4" thick. Never use a sharp or metallic instrument to remove the frost as it may damage the cooLing coils. (A punctured coil will void the warranty ) Turn the temperature control to OFF position and unplug the unit.For drai...

To avoid electric shock always unplug yourfreezer before cleaning. Ignoring this warning mayresult in death or injury. Warning: Caution: General: Prepare a cleaning solution of 3-4 tablespoons ofbaking soda mixed with warm water. Use sponge orsoft cloth, dampened with the cleaning solution, towipe d...

Check if thermostat control is not in the "OFF" position.Check if freezer is plugged in.Check if there is power at the ac outlet, by checking the circuit breaker.Wait for 30-40 minutes to see whether freezer will start. Compressorcycle must be complete to operate. Freezer Does Not Operate: F...