Haier DWE-3120A- Manuals

Page 2 - Before Using

Contents marked with that symbol are related to the safety of the product and the personal safety of the users. Please operate in strict conformity to the contents, otherwise it may result in damage of the machine or influence the personal safety of the users. Contents marked with that symbol are ac...

Page 5 - Install the lint filter; Confirm it's horizontal; horizontal; Adjust the Installation position; Adjust the adjustable foot

Please install and adjust the machine according to the requirement of the manual. It is very important to your security and correct operating the machine. Before Using Before Using Installation and adjustment Install the lint filter After opening the package, please take out thelint filter from the ...

Page 6 - If the drain hose is too long, cut it at mid; Extend the drain hose from the left side. Push the; How to change the direction of the drain hose

Before Using Before Using 1. The height of the drain hose shall be less than 10cm, or the drainage will not be smooth, and cost such long time that the machine may stop at mid way. 2. Do not ramp or press the drain hose. 3. If the drain hose is too long, cut it at mid point. To make smooth drainage,...

Page 7 - Confirm the water faucet

The exit end face of the faucet Confirm the water faucet Connection between the water inlet hose jointer and the water faucet water faucet, suitable water faucet, not suitable It is required that the front end shall be longer than 10mm.The exit end face of the faucet shall be flat and smooth. If not...

Page 9 - Pay attention to followings before washing the laundries; Preparation before washing; Pay attention to following before washing

Using process Using process 1 Preparation before washing Pay attention to followings before washing the laundries Preparation before washing 1. Connect the water inlet hose. Open the water faucet. 2. Confirm that the washing machine is earthed reliably. Then insert the power plug into the receptacle...

Page 10 - Reference weight of the laundries:; blending coat; Using process

Reference weight of the laundries: working suit up,down jeans about 800g The capacity of washing and spinning of the machine refer to the largest weight of the standard laundries under dry condition that can be washed or spinning in one time. One time washing quantity shall be lower than the rated c...

Page 11 - Usage of the detergent; Water level , water quantity and selection of powder

How to use the whitener First turn the detergent box down before adding detergent. How to use the washing powder Direct dissolved in the machine(not applicable for fuzzy and reserve programs)1.Fill small quantity of water.2.Add the power. Run for 30 seconds to dissolve it completely.3.Put in the lau...

Page 12 - Description of the function of the knobs and buttons; Use the operation knobsand buttons; Mode and meaning of the VFD indicator; button; button

Description of the function of the knobs and buttons 4 Use the operation knobsand buttons Using process Using process Mode and meaning of the VFD indicator the frame of the indicator is flashing : indicate the running program. the frame of the indicator is on : indicate the program about to run, or ...

Page 13 - PROCESS

Using process Using process POWER ON/OFF button Push the "On/Off" button to switch on the power. When the power is on, push it again to switch off the power.After the power is switched on , if the washing machine is idle for 10 minutes, it will switch off the power automatically. one or more...

Page 14 - Push the; button to select the suitable automatic program.; Steps of using the oper ation buttons and description; Push; button to select suitable procedure; Attention

PROGRAM PROCESS POWER ON/OFF Push the POWER ON/OFF button to switch on the power. Push the PROGRAM button to select the suitable automatic program. Steps of using the oper ation buttons and description of the steps Using process Using process After switching on the power, the machine will set to sta...

Page 15 - Selection method of the procedure programs; button to selection suitable water level; About 4

Using process Using process Selection method of the procedure programs Times of pushing the PROCESS button Selected procedureprogram Applicable procedure Contents (the lighted indicators indicate the programs about to run) Wash, rinse, spin(standard program) Wash (the washing liquidremains in the tu...

Page 16 - button to select the suitable reserve program; close the lid

Push the RESERVE button to select the suitable reserve program Push the START/PAUSE button 5 close the lid 6 finish washing 16 hours later, finish wash After Finishing washalarm automatically Confirm the reserve program Excluding during soak, wash, filling water procerdure,If you open the top lid, t...

Page 18 - Common phenomena; Phenomena Explanation; Phenomenan The reason How to settle; Trouble-shooting Answer to question

After the reserve is started, it rings and thedigital tube displays E0 The safety switch acts. The spinning can not work (after twice revising) The digital tube shows E3 and it rings. It does not do water inlet or the speed is slow ( the water level is not reached after15 minutes). The digital tube ...

Page 19 - Packing list

Packing list Computerized Automatic washing machine Components of the water inlet hose One Lint filter

Page 20 - Specification

Specification Model HWM120-01 Rated voltage frequency 220V ~ 50Hz Rated washing / spinning capacity 12.0kg Water level/Water quantity (about) 1/29L 2/35L 3/41L 4/47L 5/53L 6/59L 7/65L 8/71L 9/77L 10/83L 11/89L 12/96L Max water consumption About 280L (Highest water level; Standard program) Water Inje...