Page 2 - Safety precautions
1 When using this appliance, always exercise the following basic safety precautions. 1. Read all of the instructions before using this appliance. 2. Use this appliance only for its intended purpose as described in this User's Manual. 3. This cabinet must be properly installed in accordance with the ...
Page 3 - Please save these instructions.
2 Please save these instructions. Danger! Risk of child entrapment. Before you discard your old cabinet, take off the doors so that children may not easily climb inside. Thank you for using our product. This manual will guide you in getting the best use of your cabinet. Remember to record the model ...
Page 4 - Table of contents
3 Safety precautions Parts Installation Unpacking Leveling Proper air circulation Electrical requirements Features and use Initial set up Temperature adjustment Shelving Interior light Normal operating sounds Proper care and cleaning Cleaning and maintenance Power interruptions Vacation and moving c...
Page 5 - Parts
4 1. Lamp shade 2. Thermostat knob 3. Light switch 4. Handle 5. Leveling bolt 6. Shelf Parts 1 5 6 2 3 4
Page 6 - Installation; Unpacking
5 Installation Your cabinet has 4 leveling bolts located in the front and rear corners of your cabinet. After properly placing your cabinet in its final position, you can level your cabinet. Leveling bolts can be adjusted by turning clockwise to raise or counterclockwise to lower your cabinet. The c...
Page 8 - Features and use; Temperature adjustments
7 Features and use The temperature in the cabinet is controlled by the ther- mostat according to the ambient temperature and con- dition of the food in storage. The thermostat knob can be rotated clockwise or counter-clockwise between the scale of "0" and "6" (The numerals do not rep...
Page 10 - Proper care and cleaning; Cleaning and maintenance
9 Proper care and cleaning Cleaning and maintenance Warning: To avoid electric shock, always unplug your cabinet before cleaning. Ignoring this warning may result in fatal or serious injuries. Caution: Before using cleaning products, always read and follow manufacturer's instructions and warnings to...
Page 12 - Lamp replacement
11 Lamp replacement 1. Loosen the lug slightly and remove the lampshade. (Step 1) 2. Remove the U lamp tube from the holder. (Step 2) 3. Place a new lamp tube to the holder. (Step 3) 4. Replace the lampshade. (Step 4) Lug Holder step 2 step 3 Lamp tube Lamp holder Lamp cover step 1 step 4
Page 13 - Troubleshooting
12 Cabinet does not operate. Verify if the cabinet is properly plugged in. Verify if the power is supplied. Inside temperature appears too high. Frequent door openings. Short storage period Verify if the gaskets is in good condition The condenser coils need cleaning. Verify if the thermostat is prop...
Page 14 - Moisture buildup on interior or exterior of; Cabinet door does not shut properly.
13 Moisture buildup on interior or exterior of the door. This is normal during high humidity periods. Prolonged or frequent door openings. Check door gaskets for proper seal. Cabinet door does not shut properly. Level the cabinet. Check for blockages e.g. beverage bottles, shelves.