Haier AS072AZNBA- Manuals

Parts and Functions 5 Operation 1. Mode display AUTO COOLDRYFAN 2. SWING display3. FAN SPEED display 4. HEALTH display5. SLEEP display6. LOCK display7. TIMER ON display8. AUXILIARY HEAT display9. SWING10. MODE Used to select AUTO,COOL,DRY ,HEAT and FAN 11. CLOCK Used to select your desired temp. 12....

Operation 8 COOL and DRY operation AUTO DRY FAN COOL AUTO AUTO LO MED HI (1) Unit start (2) Select operation mode (3) Select temp. setting Press MODE button. For each press, operationmode changes as follows: Unit will run in operation mode displayed on LCD.Stop display at your desired mode. Press FA...

Operation 10 Hints Set Clock correctly before starting Timer operation(referring to page 5) You can let unit start or stop automatically at following times: Before you wake up in the morning, or get back from outside or after you fall asleep at night. (1)After unit start, select your desired operati...

Operation 12 In COOL ,DRY mode Approx. 6 hrs Temp. setting Unit stop One hour after SLEEP mode starts, temp. will become 1 o C higher than temp. setting. After running for another 1 hour, temp. rises by 1 o C further. Unit will run for 6 hours then stops automatically. Temp. is higher than temp. set...

Operation 13 Emergency Operation: Carry out this operation only when the remote controller is defective or lost.When the emergency operation switch is pressed, a " Pi " sound starts once, which means the start of this operation.In this operation, it is not possible to change the settings of ...

14 2.Remove air filtersPush up the filter's center tab slightly until it is caesura ofthe stopper. Remove it by pulling down. 4.Attach the filtersAttach filter behind the stopper so that the " Front " indication is facing to the front. Make sure that it is completely behind the stopper, othe...

16 Maintenance Proper room temperature. Closing of doors and windows during operation. Effective use of the timer. Never fail to observe the followings Do not block the inlet or outlet. Do not use for other purposes. Do not pull power plug. Do not sprinkle water over the unit.. Proper temperature On...

17 Before asking for service, check the following first. Cause or check points When unit is stopped, it won't restartimmediately until 3 minutes have elapsed to protect the system.When the electric plug is pulled out andreinserted, the protection circuit will workfor 3 minutes to protect the air con...