Greenworks 27062 - Manuals

5 SAVE THESE INSTRUCTIONS SPECIFIC SAFETY RULES • Do not use near underground electric cables, telephone, lines, pipes, or hoses. If in doubt, contact your utility or telephone company to locate underground services. • If the unit strikes a foreign object, stop the motor, disconnect the battery, tho...

7 SYMBOLS SYMBOL NAME DESIGNATION/EXPLANATION V Volts Voltage A Amperes Current Hz Hertz Frequency (cycles per second) W Watt Power min Minutes Time Direct Current Type or a characteristic of current Wet Conditions Alert Do not expose to rain or use in damp locations Read The Operator’s Manual To re...

8 The following signal words and meanings are intended to explain the levels of risk associated with this product. SERVICE Servicing requires extreme care and knowledge and should be performed only by a qualified service technician. For service we suggest you return the product to your nearest AUTHO...

9 KNOW YOUR CULTIVATOR Read this operator’s manual and safety rules before operating your cultivator. Compare the illutration in Fig.2.1 to your cultivator in order to familiarize yourself with the location of various controls and adjustments. Save this manual for future reference. Fig. 2 SAFETY LOC...

1 0 UNPACKING This product requires assembly. • Carefully remove the product and any accessories from the box. Make sure that all items listed in the packing list are included. • Inspect the tool carefully to verify no breakage or damage occurred during shipping. • Do not discard the packing materia...

11 ASSEMBLY ASSEMBLING THE HANDLEBAR (See Figure. 3) • Align the holes on the middle with the holes on the lower handles. Insert the bolts, and tighten them using the wing nuts provided. • Fold the handle base on the Fig.4 - 4.1 Step1: Release the wing nuts Step2: Rotate the upper handle base on the...

12 ASSEMBLY ASSEMBLING THE WHEELS (See Figure. 5) The wheels are used to control the depth of operation. To adjust the height of the wheels. 1. Remove the battery from the unit . 2. Place cultivator in a stable position as shown in Fig. 5 3. Insert the wheel assembly (2) into the support rod (3). (F...

13 ASSEMBLY INSTALLING THE TINES (See Figure 6) The cultivator comes with four tines—For correct operation of the unit, the tines must be installedin the correct order. The cultivator may be used with four tines or two tines. • Disconnect from power source. • Lean the unit back on its wheels so that...

1 4 ASSEMBLY TINES INSTALLED CORRECTLY (See Figure. 7) NOTE: tine blades should point towards the ground (Fig. 7). NOTE: The tiller will not operate properly if the tines are not installed correctly. If there is a problem with the cultivating operation of the tiller, check the tines for proper posit...

15 OPERATION W A R N I N G Do not allow familiarity with tools to make you careless. Remember that a careless fraction of a W A R N I N G Always wear safety goggles or safety glasses with side shields when operating tools. Failure to do so could result in objects being thrown into your eyes, resulti...

1 6 OPERATION PREPARING THE SEED BED The cultivator can be used to break up garden soil and prepare a seedbed for planting. Plan ahead to leave enough room between the seed rows to allow for machine cultivating after the plants have grown. TILLING SOD: Tilling sod into the soil is not recommended. I...

17 MAINTENANCE W A R N I N G WHEN SERVICING, USE ONLY IDENTICAL REPLACEMENT PARTS. USE OF ANY OTHER PARTS MAY CREATE A HAZARD OR CAUSE PRODUCT DAMAGE. W A R N I N G ALWAYS WEAR SAFETY GOGGLES OR SAFETY GLASSES WITH SIDE SHIELDS DURING PRODUCT OPERATION. IF OPERATION IS DUSTY, ALSO WEAR A DUST MASK. ...

18 BATTERY CHARGER CHARGING PROCEDURE (See Figure 1 0 ) NOTE: The battery is not shipped fully charged. It is recommended to fully charge before first use to ensure that maximum run time can be achieved. This lithium-ion battery will not develop a memory and may be charged at any time. A fully disch...

19 BATTERY CHARGER CHARGER MAINTENANCE • Keep the charger clean and clear of debris. Do not allow foreign material into the recessed cavity or on the contacts. Wipe with a dry cloth. Do not use solvents, water, or place in wet conditions. • Always unplug the charger when there is no battery pack in ...

20 TROUBLESHOOTING PROBLEM Motor fails to start when switch trigger is depressed. Motor runs but tines do not move. CAUSE The battery is not inserted in or connection is loose. Household circuit breaker is Cultivator circuit overload protection is tripped. Let unit rest for 4 minutes, then repeat st...

21 LIMITED FOUR-YEAR WARRANTY GREENWORKS™ hereby warranties this product, to the original purchaser with proof of purchase , for a period of four (4) years against defects in materials, parts or workmanship. GREENWORKS™, at its own discretion will repair or replace any and all parts found to be defe...

2 4 PARTS LIST ITEM # PART NO. QTY DESCRIPTION 31102281 31103281 32208261 3220436 31102289 31114281 34901282-1 31115281 33210289 322085281 3220505 34107289 33301289 36301289 34104289 34105289 34106488 3290135 3220898 31101488-1 33204289 3410835-8 32204283 31106289 32208250 33323250-1 3220439 3320328...

Printed in China on 100% Recycled Paper Rev: 0 2 ( 1 2 - 07 -1 2 ) TOLL-FREE HELPLINE: 1-888-90WORKS (888.909.6757)