Greenworks 25062 - Manuals

5 SAFETY INFORMATION • Avoid dangerous environments. Do not operate the mower in the rain or in wet or damp grass. • Mow only in daylight or in good artificial light. Do not rush a mowing job.• Stop machine if anyone enters the area. • Do not pull machine backward unless absolutely necessary. Always...

Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the product better and safer. SYMBOLS SYMBOL NAME DESIGNATION/EXPLANATION Read The Operator’s Manual To reduce the risk of injury use...

7 The following signal words and meanings are intended to explain the levels of risk associated with this product. SERVICE Servicing requires extreme care and knowledge and should be performed only by a qualified service technician. For service we suggest you return the product to your nearest AUTHO...

8 KNOW YOUR REEL MOWER Fig. 1 Read this operator's manual and safety rules before operating your reel mower. Compare the illustration in Figure 1 to your reel mower in order to familiarize yourself with the location of various controls and adjustments. Save this manual for future reference. Middle h...

9 UNPACKING Before attempting to assemble, empty carton and compare parts with parts list below. • Carefully remove the product and any accessories from the box. • Inspect the parts to make sure no breakage or damage occurred during shipping. • Do not discard the packing material until all parts are...

10 W A R N I N G Do not allow familiarity with this product to make you careless. Remember that a careless fraction of a second is sufficient to inflict serious injury. W A R N I N G Do not use any attachments or accessories not recommended by the manufacturer of this product. The use of attachments...

11 ATTACHING THE HANDLE TO THE MOWER BASE (See Figure 6) Align holes (1) at the lower end of each handle arm with posts (2) extending from the mower base side plates. Slide lower ends of handle arms onto posts. ASSEMBLY INSTRUCTIONS Fig. 6 1 2

12 ATTACH THE REAR BAG (See Figure 7-10) • Take out all components in the packing (Fig. 7). • Push the left and right washer on rear bag bracket to inside direction to make the rear bag open. (Fig. 8). • Place the hooks (1) on the rear bag onto the roller shaft (2). (Fig. 9). • Place locking strap (...

13 OPERATING YOUR REEL MOWER CUTTING HEIGHT ADJUSTMENT (See Figure 11) • The cutting height of the mower adjusts from 1-3/4 - 2-3/4” (4.4 - 6.8 cm) with 9 positions for adjustment height by moving the height adjustment levers to the required position. • To achieve the lowest cutting position, one at...

OPERATING YOUR REEL MOWER 14 MOWER BLADE ADJUSTMENT ( See Figure 13 ) W A R N I N G BLADES ARE EXTREMELY SHARP. TO AVOID INJURY, DO NOT TOUCH BLADES WHEN MAKING ADJUSTMENTS. NOTE: Blades are factory adjusted. • Misalignment can occur, often caused by blades being too loose or too tight. This can cau...

15 CARE AND MAINTENANCE • Minimum care is required to ensure smooth operation of your mower. • To avoid damage to mower or cutting blades, keep area to be mowed free from debris. • For best results, regularly apply lubricant to mower’s cutting surfaces, cutting reel axle shaft and wheels. W A R N I ...

16 GREENWORKS™ hereby warranties this product, to the original purchaser with proof of purchase , for a period of four (4) years against defects in materials, parts or workmanship. GREENWORKS™, at its own discretion will repair or replace any and all parts found to be defective, through normal use, ...

18 PARTS LIST ITEM NO. PART NO. DESCRIPTION QTY 1 N-1 Support (L) 1 2 N-2 Support (R) 1 3 N-3 Wheel support board 2 4 N-4 Cylinder-blade assy. 1 5 N-5 Top push handle 1 6 N-6 Middle handle 2 7 N-7 Lower handle 2 8 N-8 Housing assy. 1 9 N-9 Cutting bar assy. 1 10 N-10 Cutting bar pivot rod 1 11 N-11 ...

TOLL-FREE HELPLINE: 1-888-90WORKS (888.909.6757) Rev: 02 (10-13-11) Printed in China on 100% Recycled Paper