Graco Trabon MSP Modular Divider Valves- Manuals

Page 2 - MSP Modular Divider Valves; The fl exible, modular MSP Divider Valve

MSP Modular Divider Valves Page 2 L10102 Match lubricant ﬂ ow to the exact needs of each point. Precise monitoring, positive feedback • Simple to install and operate • Modular design for total ﬂ exibility • The ﬂ exible, modular MSP Divider Valve For grease or oil systems up to 3,500 psi (241 bar) •...

Page 3 - Special Inlet Sections; Allow zoning of large systems served by single pump; Shunt Inlet Section

MSP Modular Divider Valves Page 3 L10102 Improve matchup of lube delivery and machine usage. Special Inlet Sections Allow zoning of large systems served by single pump • and reservoir Choice of inlet port activation: electric or pneumatic • Simpler to install, add or remove points • Choice of SAE, N...

Page 4 - Cycle Indicators; Universal Cycle Counter:

MSP Modular Divider Valves Page 4 L10102 A wide variety of safeguards monitor and verify lube cycles Track valve-piston action • Easily interfaced to system controller • Cycle Indicators These mechanical and electrical units sense the divider valve piston’s action for accurate control and monitoring...

Page 5 - Immediate response to blockages; Performance Indicators; Manual Reset Indicator with Memory

MSP Modular Divider Valves Page 5 L10102 Choice of indicators offer automatic system protection and fault location. Immediate response to blockages • Manual or automatic reset • Continues to serve unaffected points • Performance Indicators These vital safeguards react to excess lube pressure when po...

Page 6 - Engineering certifi ed to ISO 9001 Standards; Quality Design; SIDE VIEW

MSP Modular Divider Valves Page 6 L10102 Designed with over 100 years of experience in centralized lubrication. Engineering certiﬁ ed to ISO 9001 Standards • Modular design for maximum ﬂ exibility • Install and maintain without disturbing lube lines • Quality Design MSP DIVIDER SPECIFICATIONS Standa...

Page 7 - Shunt Inlet Option; Solenoid mounted on right side n.o. to divider, closed to bypass

MSP Modular Divider Valves Page 7 L10102 “A” (See Page 6) Zero-Leak Inlet Shut-Off Valve Shunt Inlet Option Zero-Leak Electrical Speciﬁ cations: 115 VAC, 0.22 A In-Rush, 0.14 A Holding 24 VDC, 28 W Shunt/Shut-Off Electrical Speciﬁ cations: 115 VAC, 1.6 A In-Rush, 0.54 A Holding 24 VDC, 28 W Solenoid...

Page 8 - Custom performance from stock modules; Specifying Guide - MSP Divider Valve; Component Identifi cation and Ordering Information*; Special Inlets

MSP Modular Divider Valves Page 8 L10102 You can easily conﬁ gure the system to the need. Custom performance from stock modules • Choice of Single or Twin outlets • Specifying Guide - MSP Divider Valve Component Identiﬁ cation and Ordering Information* Zinc plated carbon steel Item DescriptionT = Tw...

Page 9 - Modular design for full fl exibility

MSP Modular Divider Valves Page 9 L10102 NOTE: Part numbers shown on previous page are for standard plated steel with Buna-N Seals. Consult Graco for Viton Seals or stainless steel components. Valve sections with cycle pin are standard Right Hand; can be made Left Hand. Consult factory. Consult fact...

Page 10 - Notes; Ordering Example

MSP Modular Divider Valves Page 10 L10102 Notes Right/Left Hand determined when 1. viewing front of divider valve assembly. (Divider valve assembly placed on ﬂ at surface with inlet at top.) Valves are speciﬁ ed starting from 2. inlet section. When valve is crossported, its outlet 3. is plugged and ...

Page 12 - or visit us online at; Your solution is at hand.

All written and visual data contained in this document are based on the latest product information available at the time of publication. Graco reserves the right to make changes at any time without notice. ©2005-2008 Graco Inc. Form No. L10102 Rev. B 7/09 Printed in U.S.A. All other brand names or m...