Graco ti13980 - Manuals - manualsarea.com

Page 2 - Warnings; WARNING

Warnings 2 3A1767A Warnings The following warnings are for the setup, use, grounding, maintenance, and repair of this equipment. The exclama-tion point symbol aler ts you to a general warning and the hazard symbol refers to procedure-specific risk. Refer back to these warnings. Additional, product-s...

Page 3 - Models

Warnings 3A1767A 3 Models Each model shown in the table below is available in several colors. The last character of each model no. indicates the hose reel color. A = white, B = Metallic Blue and F = Yellow. On the table below, this last character is represented by the generic # symbol. For example, ...

Page 4 - Installation; Typical Installation Layout

Installation 4 3A1767A Installation Typical Installation Layout A Main air supply B Pump air supply C Air regulator D Bleed-type master air valve (user supplied, required) E Pump F Grounding wire (user supplied, required for pump and hose reel) G Fluid line H Hose reel J Dispensing valve K Air Suppl...

Page 5 - Pressure Relief Procedure

Installation 3A1767A 5 Pressure Relief Procedure 1. 2.

Page 6 - All Mountings

Installation 6 3A1767A All Mountings NOTE: Reels perform best when arm allows hose to pull straight off the spool as shown in F IG . 2 and F IG . 3. To reduce the risk of injury, be sure the mounting sur-face and mounting screws are strong enough to sup-port the reels, weight of the fluids and stres...

Page 7 - Wall Mounting

Installation 3A1767A 7 Wall Mounting Ceiling Mounting 1. A = Screws 2. A = Screws A ti13982 A ti13983 Maximum distance tofloor - 16 ft (4.87 m) 1. A = Screws 2. A = Screws A A Maximum distance tofloor - 16 ft (4.87 m)

Page 8 - Truck Bed Mounting

Installation 8 3A1767A Truck Bed Mounting Changing Position of Guide Arms (30) 1. A = Screws A 1. Remove nuts (33). Reposition guide arms (30) to new location. 2. Reinstall nuts (33). Torque to 25 - 35 ft lbs (33.9 to 47.5 N · m). 33 30 33 30

Page 10 - Flushing

Installation 10 3A1767A Flushing Before installing meter or dispense valve to end of hose, flush supply line with a solvent compatible with the fluid you are dispensing. 1. Place end of hose in waste container. 2. Blow out entire supply line with air. 3. Flush equipment with DEF until fluid runs cle...

Page 11 - Adjusting Spring Tension; Increasing Spring Tension

Adjusting Spring Tension 3A1767A 11 Adjusting Spring Tension Increasing Spring Tension Uncontrolled spinning of the hose reel could cause serious injury if you are hit by the hose or the adjusting tool (C). • Never allow the reel to spin freely. • Always grasp the tool firmly with both hands when ad...

Page 13 - Decreasing Spring Tension

Adjusting Spring Tension 3A1767A 13 Decreasing Spring Tension Uncontrolled spinning of the hose reel could cause serious injury if you are hit by the hose. • Never allow the reel to spin freely. • Always grasp the tool firmly with both hands when adjusting tension. • The reel must be bolted securely...

Page 15 - Hose Stopper Installation

Hose Stopper Installation 3A1767A 15 Hose Stopper Installation Installing Nozzle 1. 2. ti13525 1.

Page 16 - Parts

Parts 16 3A1767A Parts Ref. No. Part No. Description Qty 1‡ SHAFT, spring (not shown) 1 2 15Y781 WASHER, flat (not shown) 1 3† KIT, swivel, shaft 1 4‡ KEY, square (not shown) 1 5‡ HUB, power, spring 1 7‡ WASHER, flat, spring side 1 9‡ FLANGE, set, black 1 10‡ SPRING, power, 21 turn (not shown) 1 11‡...

Page 18 - Technical Data; Dimensions

Technical Data 18 3A1767A Technical Data Dimensions Model No. Application Hose Size Maximum Pressure Inlet (BSPP) Outlet (BSPP) PSI Bar Mpa HSDD5#HSDDD# DEF 3/4 in. x 50 ft.(19 mm x 1524 cm) 50 3.4 0.34 3/4 inch 3/4 inch HSDD5#HSDDD# Bare N/A 50 3.4 0.34 3/4 inch 3/4 inch Maximum Dry Weight (without...

Page 19 - Mounting Pattern

Technical Data 3A1767A 19 Mounting Pattern 293.86 mm 131.76 mm (5.187 in.) 14 mm (1/2 in.)bolts - 4X (11.57 in.)

Page 20 - Graco Hose Reel Warranty; Graco Information

All written and visual data contained in this document reflects the latest product information available at the time of publication. Graco reserves the right to make changes at any time without notice. Original instructions. This manual contains English. MM 3A1767 Graco Headquarters: Minneapolis Int...