Graco SDPMETER - Manuals - manualsarea.com

Page 2 - Contents

Contents 2 3A6673B Contents Warnings ....................................................................................................4Models ........................................................................................................6Overview ............................................

Page 4 - Warnings; SKIN INJECTION HAZARD; Get immediate surgical treatment.; EQUIPMENT MISUSE HAZARD; Technical Specifications

Warnings 4 3A6673B Warnings The following warnings are for the setup, use, grounding, maintenance, and repair of this equipment. The exclamation point symbol alerts you to a general warning and the hazard symbols refer to procedure-specific risks. When these symbols appear in the body of this manual...

Page 5 - FIRE AND EXPLOSION HAZARD; Stop operation immediately; PERSONAL PROTECTIVE EQUIPMENT; WARNING

Warnings 3A6673B 5 FIRE AND EXPLOSION HAZARD When flammable fluids are present in the work area, such as gasoline and wind-shield wiper fluid, be aware that flammable fumes can ignite or explode. To help prevent fire and explosion: • Use equipment only in well-ventilated area. • Eliminate all igniti...

Page 6 - Models; LPM

Models 6 3A6673B Models Model Swivel Extension Nozzle Fluid Max Volumetric Flow Rate GPM LPM 26C384 1/2 NPT Rigid Automatic Oil 8 30 26C385 1/2 NPT Rigid Antifreeze Antifreeze 8 30 26C354 1/2 NPT Flexible Automatic Oil 8 30 26C355 1/2 NPT Flexible Antifreeze Antifreeze 8 30 26C356 1/2 NPT Rigid High...

Page 7 - Overview; Metered Dispense Valve; Arrows

Overview 3A6673B 7 Overview Metered Dispense Valve NOTE: The metered dispense valve can be set up to be used without a Pulse FC system, or with a Pulse FC system with the installation of a Pulse FC Starter kit (P/N 26C401). Navigation Pad (F IG . 1) The Navigation Pad includes 4 navigation ARROWS (U...

Page 8 - open

Overview 8 3A6673B Opening and Closing the Nozzle • To open the nozzle, rotate the nozzle clockwise . • To close the nozzle, rotate the nozzle counter-clockwise . F IG . 3 Open Closed

Page 9 - Typical Installation; Mounting Bracket; Ref

Typical Installation 3A6673B 9 Typical Installation The typical installation shown in F IG . 4 is only a guide. It is not a complete system design. Contact your Graco distributor for assistance in designing a system to suit your needs. The metered dispense valve is not designed for in-line installat...

Page 10 - Installation; Pressure Relief Procedure; NOTICE

Installation 10 3A6673B Installation Pressure Relief Procedure Follow the Pressure Relief Procedure whenever you see this symbol. 1. Turn off the power supply to the pump or close the fluid shut off valve (B). 2. Open the nozzle. Authorize and activate a dispense. Trigger the metered dispense valve ...

Page 11 - Flushing

Installation 3A6673B 11 Flushing The equipment was tested with lightweight oil, which was left in the fluid passages to protect parts. To avoid contaminating the fluid, flush the equipment with a compatible solvent before use. 1. Close the fluid shut-off valve (B, F IG . 4, page 9) at each dispense ...

Page 12 - Install the Extension Tube

Installation 12 3A6673B Install the Extension Tube 1. Adjust nut (c) on extension (2) so that the maximum thread engagement of the extension can be utilized (F IG . 8). 2. Thread extension (2) into housing until it bottoms out (F IG . 8). 3. Align extension (2) with metered dispense valve housing an...

Page 13 - Preset Mode; Main Menu Screen; DISPENSE; Calibration

Preset Mode 3A6673B 13 Preset Mode Main Menu Screen This screen provides access to the main metered dispense valve functions: • DISPENSE , page 18 • TOTAL , page 21 • UTILITY MENU , page 21 Calibration NOTE: • This calibration procedure requires a one quart or one liter clean, calibrated, volumetric...

Page 14 - Manual; exactly

Preset Mode 14 3A6673B 3. Use the UP or DOWN ARROW button on the keypad to highlight CALIBRATE (F IG . 14) and then press the center ENTER button on the keypad to select the CALIBRATE option. 4. The calibration k-factor screen shown in F IG . 15 displays. NOTE: The number shown on the display is the...

Page 15 - Manual Calibration

Preset Mode 3A6673B 15 8. Press the center ENTER button on the keypad again to select END and save the new calibration factor. 9. After selecting END the following screen (F IG . 18) displays. Manual Calibration NOTE: This Manual Calibration procedure is used when the k-factor is known and a simple ...

Page 16 - Alternate Calibration

Preset Mode 16 3A6673B 5. Be sure ENTER is highlighted in the lower left corner of the display as shown in F IG . 21. Press the center ENTER button on the keypad to save the new calibration factor. 6. After selecting ENTER the following screen (F IG . 22) displays. Alternate Calibration NOTE: This a...

Page 18 - Table 1; Fluid

Preset Mode 18 3A6673B 11. Calculate the new k-factor using the following equation: Example: Kcurrent = 169 Volume displayed on metered dispense valve = 0.970 quart Volume dispensed = 1 quart Round to the nearest whole number: 163.9 = 164. NOTE: The unit of measurement for both volumes must be the s...

Page 19 - Preset Dispense

Preset Mode 3A6673B 19 D DISPENSED FLUID COUNTER- As fluid is dispensed, this number increases to reflect the quantity of fluid that is being dispensed. NOTE: If RESET was not selected after the previous dispense was completed, the amount of fluid dispensed in the previous dispense will be shown in ...

Page 20 - STOP Function; STOP; END; PRESET; RESET

Preset Mode 20 3A6673B 5. The screen shown in F IG . 33 displays. Notice the word “DONE” near the top of the screen, confirming the requested PRESET amount of fluid has been dispensed. The progress bar (F) now is entirely filled in and shows 100% of the fluid requested has been dispensed and the Dis...

Page 21 - TOTAL; GO BACK; UTILITY MENU; DEVICE INFORMATION

Preset Mode 3A6673B 21 TOTAL M LIFETIME TOTAL - Running, non-resettable total quantity fluid that has been dispensed over the life of the meter. The unit of mea-surement displayed is determined by the Unit of Measurement criteria selected in UTILITY MENU/SET-UP/UNIT OF MEA-SURE, page 23. When Pints,...

Page 23 - UNIT OF MEASURE; UNIT; BANNER

Preset Mode 3A6673B 23 UNIT OF MEASURE The meter is factory-set to quarts. The UNIT OF MEASURE screen configures the meter to dispense in PINTS, QUARTS, GALLONS OR LITERS. This screen also includes a GO BACK option to return to the Utility Menu screen. 1. Use the UP or DOWN ARROW button on the keypa...

Page 24 - CALIBRATE; LANGUAGE

Preset Mode 24 3A6673B CALIBRATE Calibrating the metered dispense valve assures that dispenses are accurate. See Calibration instructions beginning on page 13. “+++” Indicates there are additional functions; LANGUAGE , FLIP DISPLAY , LOCK SETTINGS and GO BACK are available on the next screen. LANGUA...

Page 25 - PRESET SETUP SCREEN; Creating a PRESET

Preset Mode 3A6673B 25 PRESET The metered dispense valve can be programmed to dispense 5 different preset amounts. 1. Use the UP or DOWN ARROW button on the keypad to highlight the desired PRESET. Press the center ENTER button to select it. 2. The screen shown in F IG . 46 displays. PRESET SETUP SCR...

Page 26 - FLIP DISPLAY; LOCK SETTINGS; LOCK SETTINGS

Preset Mode 26 3A6673B 4. Press the center ENTER button on the keypad after each letter or number is highlighted to select it. 5. After naming the PRESET, use the RIGHT ARROW button on the keypad to highlight the symbol. Press the center ENTER button on the keypad to return to the PRESET Setup Scree...

Page 27 - not

Preset Mode 3A6673B 27 3. The menu shown in F IG . 53 displays. Use the DOWN ARROW button to highlight RESET in the list. NOTE: Do not press the center ENTER button after RESET is selected. Continue to step 4. 4. Press and hold the LEFT ARROW button. 5. While still holding down the LEFT ARROW button...

Page 28 - Pulse FC Mode; Enable Pulse FC Mode

Pulse FC Mode 28 3A6673B Pulse FC Mode Pulse FC Mode is only available with the purchase and installation of a Pulse FC Starter Kit (P/N 26C401). The kit contains everything needed to begin using Pulse FC with the meter, including a programmer and a software license. Pulse FC uses NFC tags that are ...

Page 29 - Activation

Pulse FC Mode 3A6673B 29 Activation 1. Press the center ENTER button on the keypad to activate the meter. The screen shown in F IG . 55 displays. 2. Hold the voucher or tag to the display. If the meter does not recognize the voucher or tag, an INVALID (F IG . 58) message displays Calibration NOTE: •...

Page 31 - Screen Identification

Pulse FC Mode 3A6673B 31 3. The k-factor adjustment screen shown in F IG . 64 displays. 4. Use the UP and DOWN ARROW to increase or decrease the displayed k-factor until the new k-factor displays on the screen. NOTE: Selecting the GO BACK Function on this screen returns the display to the previous s...

Page 32 - END Function

Pulse FC Mode 32 3A6673B D DISPENSED FLUID COUNTER- As fluid is dispensed, this number increases to reflect the quantity of fluid that is being dispensed. E UNIT OF MEASURE - Pints, Quarts, Gal- lons or Liters. Can only be set up by a Pulse FC profile tag. F PROGRESS BAR - Graphic representation of ...

Page 35 - Service; Battery Replacement

Service 3A6673B 35 Service Battery Replacement • Replace batteries with four AA, alkaline batteries. • Be sure to follow the correct polarity as shown on the installation labels located on either side of the metered dispense valve when installing batteries in the battery compartment (F IG . 76). • D...

Page 36 - Parts

Parts 36 3A6673B Parts F IG . 78 19 37 29 28 27 5 36 2 3 14 17 21 20 15 18 6 16 10 4 13 12

Page 37 - Related Kits; Qty; Ref Part

Parts 3A6673B 37 Parts Related Kits Ref Part Description Qty 1 ---- VALVE, metered dispense valve (see models page X) 1 2 ---- EXTENSION 16Y863 Flex 255194 Rigid 1 255854 Gear Lube 273079 Windshield washer solvent 3 ---- NOZZLE 17R220 Automatic, quick close 1 17T207 Manual Antifreeze 255461 High Flo...

Page 38 - Troubleshooting; Perform pressure relief procedure

Troubleshooting 38 3A6673B Troubleshooting 1. Perform pressure relief procedure , page 10, before you check or repair the metered dispense valve. 2. Verify that the pump, other valves, and controls are operating properly. Problem Cause Solution Battery dead icon is present. Batteries are low. Replac...

Page 40 - Error Codes; Error Code

Error Codes 40 3A6673B Error Codes Error codes are listed below. Even in an error condition the unit keeps track of the amount dispensed. Whenever an error code is displayed, you must end the dispense. Error Code Cause Solution Error 2 Reed Switch Error: Error occurred with pick-up in internal gear....

Page 43 - Graco 5-Year Meter and Valve Warranty; Graco Information

Graco 5-Year Meter and Valve Warranty 3A6673B 43 Graco 5-Year Meter and Valve Warranty Graco warrants all equipment referenced in this document which is manufactured by Graco and bearing its name to be free from defects in material and workmanship on the date of sale to the original purchaser for us...