Graco LC-1000 - Manuals

Graco LC-1000 – Manual in PDF format online.

Manuals:

Manual

Manual Graco LC-1000

Summary

Page 2 - LC-1000 Lube System Controller; WIRING INFORMATION; OR 3 WIRE TYPE; WIRING INFORMATION

Page 2 14540 LC-1000 Lube System Controller INPUT VOLTAGE HOT NEU PUMP PUMP 1 2 3 4 5 6 7 8 9 MANUAL RUN 10 11 12 13 14 15 16 17 18 19 CYCLE SWITCH (SEE NOTE 2) + - + - F AUL T F AUL T DO NOT USE OPTIONAL LOW-LEVEL SWITCHAND/OR HIGH PRESSURESWITCH. BOTH MUST BEOPEN DURING NORMALSYSTEM OPERATION. FIG...

Page 3 - ORDERING INFORMATION; A fl ashing LCD character; Replacement Board

Page 3 14540 LC-1000 Lube System Controller 76.2 (3.00) DIMENSIONS mm / (Inches) 114.3 (4.50) 127.0 (5.00) 114.3 (4.50) 4.8 (.19) POWERLUBEFAULTCYCLE LUBE SYSTEM CONTROLLER TIME COUNTS REMAINING MANUAL RUN PRGM ENTER MODEL LC-1000 MANUAL RUN BUTTON 127.0 (5.00) ORDERING INFORMATION PROGRAMMING INSTR...

Page 4 - OPERATION; fl; CHANGING SETTINGS; Piston Distributor or Injector:

Page 4 14540 LC-1000 Lube System Controller OPERATION When power is applied, the green “POWER LED”lights and the LC-1000 counts down alternately from the programmed “OFF/ON” Times/Counts to zero. In the “ON” (Monitor) mode, the ” PUMP LED” lights.The pump is activated and both the “ON and “RUN” icon...