Graco ISPB004HB- Manuals

Page 2 - Securing Child in Vehicle with; Table of Contents

Important Information . . . . . . . . . . . . . . . . . 3 European Standard . . . . . . . . . . . . . . . . . . . 4 Parts List . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Warnings to Parents and Other Users . . . . 6-9 Adjusting the Armrests . . . . . . . . . . . . . 9-10 Assembling the Ba...

Page 3 - Important Information

Important Information 3 Read this Owner’s Manual completely BEFORE firstuse of your booster seat! Always keep this Owner’s Manual with the boosterseat. Provisions are made on the bottom of the seatshell. Plan to spend some time getting to know yourbooster seat — time well spent when you consider tha...

Page 4 - European Standard; Your booster seat has been approved to; Graco Children’s Products

4 European Standard European Safety Standards specify the constructionand performance of your booster seat as well as its components, requirements for fitting and use, instructions and markings. Your booster seat has been approved to European Standard ECE R44.03 Universal Group 2,3 15-36 kg An appro...

Page 6 - NO BOOSTER SEAT CAN GUARANTEE; DO NOT let others; IT IS MOST IMPORTANT; that the booster seat; DO TAKE CARE; to locate and install the

6 Warnings to Parents and Other Users • NO BOOSTER SEAT CAN GUARANTEE PROTECTION FROM INJURY. HOWEVER,PROPER USE OF THIS BOOSTER SEATREDUCES THE RISK OF SERIOUS INJURYOR DEATH TO YOUR CHILD. • DO NOT INSTALL OR USE THIS BOOSTER SEAT UNTIL YOU READ AND UNDERSTAND THE INSTRUCTIONS INTHIS MANUAL AND IN...

Page 9 - Adjusting the Armrests; CHECK; to make sure; or a booster seat whose history you do not; NEVER USE THIS BOOSTER SEAT; without

9 Adjusting the Armrests Step 1. To adjust armrests,remove screw and pressin button on side ofbase as shown to raiseor lower / .Reinsert screw andtighten. CHECK to make sure armrests are securelyattached by pulling upon them. 1 1 2 2 • NEVER USE A SECOND-HAND BOOSTERSEAT or a booster seat whose hist...

Page 10 - FOR MODELS; with a

10 Step 2. Slip armrest covers(on certain models) onto armrests as shown. Step 3. Your Graco booster seat is now ready to use. Seepage 30, “SecuringChild in Vehicle withShoulder BeltPositioning Clip”. FOR MODELS with a back support continueon to Step 4.

Page 11 - Assembling the Back Support; to make sure two pieces are securely snapped

11 Assembling the Back Support (on certain models) Step 4. Flip head support and lower back support over as shown . Step 5. Squeeze red adjustment button and slide two piecestogether until they snap into place . CHECK to make sure two pieces are securely snapped together by pulling on them. CLIK! 1 ...

Page 12 - Attach elastic strap as shown 3 .

12 Step 7. Flip seat over and insert the fabric from the head support underneath the fabric on the lower back supportas shown . To make insertion of fabric easier, slide the upper andlower back pieces apart by squeezing the red adjustmentbutton. Step 6. Attach elastic strap as shown 3 . 3 3 4 4

Page 16 - Weight and Height Limits; With back support; • are between 96 and 145 cm in height, and; MUST; lay

16 FAILURE TO USE booster seat in a manner appropriate for your child’s size may increase therisk of serious injury or death. Weight and Height Limits To use this Graco booster seat, your child MUSTmeet ALL of the following requirements: With back support (approximately 3 to 10 years old) : • weigh ...

Page 17 - Without back support; • are between 101 and 145 cm in height, and; • when sitting on the booster

17 Without back support (approximately 4 to 10 years old) : • weigh between 15-36 kg, and • are between 101 and 145 cm in height, and • the shoulder belt MUST lay across child’s shoulders in red zone as shown in and the lap portion is positioned low on the childs hips, and • when sitting on the boos...

Page 18 - NOT; be safe for this booster seat.; Vehicle Seat Location Requirements; Whenever possible

18 IMPROPER PLACEMENT OF THE BOOSTERSEAT INCREASES THE RISK OF SERIOUSINJURY OR DEATH. Some seating positions in your vehicle may NOT be safe for this booster seat. Some vehicles do not have any seating positionsthat can be used safely with the booster seat. If youare not sure where to place the boo...

Page 19 - safe to use look very; consult your vehicle owner’s manual.; Vehicle Seat Belt Requirements

MANY SEAT BELT SYSTEMS ARE NOTSAFE TO USE WITH THE BOOSTER SEAT. Pay careful attention to these systems; some ofthe seat belts that are NOT safe to use look very much like seat belts that are safe to use. If youare unsure, consult your vehicle owner’s manual. Vehicle Seat Belt Requirements ONLY A LA...

Page 20 - DO NOT USE; ANY; use a; • NEVER; use a

DO NOT USE ANY OF THE FOLLOWING VEHICLE BELTSYSTEMS. • NEVER use a lap-only belt. UNSAFE Vehicle Seat Belt Systems • NEVER use a Passive Restraint -Lap or Shoulder BeltMounted on Door 20

Page 21 - Using your Graco Booster Seat; NEVER; use a vehicle

Using your Graco Booster Seat Use only the vehicle’s lapand shoulder belt systemwhen restraining the childin this booster seat . NEVER use a vehicle lap-only belt across front of child . FAILURE TO PROPERLY SECURE YOURCHILD AND THE BOOSTER SEAT IN YOURVEHICLE INCREASES THE RISK OF SERIOUS INJURY OR ...

Page 22 - use shoulder; position; DO NOT; allow child; DO NOT

Vehicle belts MUST layflat against child and MUST not be twisted. DO NOT use shoulder belt loose or positionedunder child’s arm . DO NOT position vehicle belt over top of thearmrests . It must passunderneath the armrests. Make sure vehicle belt is NOT twisted. Lap portion of lap/shoulder belt MUSTbe...

Page 23 - hang over front; fit tight

Vehicle seat headrestmust not interfere with booster seat headsupport. The front ofbooster seat MUST NOT hang over front of vehicle seat . The back of the boosterseat MUST fit tight against the vehicle seatback as shown . 23 6 7 6 7

Page 24 - Booster Seat Positions; Your booster seat has two positions as shown.

24 Booster Seat Positions Your booster seat has two positions as shown. DO NOT USE booster seat beyondreclined position . The back of the boosterseat MUST fit tight against the vehicle seatback as shown in in either the first or secondposition. Upright Reclined 1 2 3 3 2

Page 25 - Securing Your Child in Vehicle; Place booster seat firmly against the back of a

25 Securing Your Child in Vehicle 1. Place booster seat firmly against the back of a forward-facing vehicle seat equipped with alap/shoulder belt only . 2. Have your child sit in booster seat with their back flat against back of booster seat. 1 1

Page 26 - Fasten

26 CORRECT INCORRECT 3. Position shoulder belt through the shoulder beltguide shown in , NOT as shown in . Fasten buckle and pull up on the shoulder belt to tighten. 2 3 2 3

Page 27 - To ensure the correct; and the; CORRECT

27 4. To ensure the correct head support height isobtained, the bottomof the headrest MUST be even with the top ofchild’s shoulders asshown in and the shoulder belt must bepositioned in the redzone as shown in . The lap belt portionMUST pass under the armrests and bepositioned low on thehips. Belt M...

Page 28 - If the belt lays across; INCORRECT

28 5. If the belt lays across child’s neck, head orface , readjust head support height. Follow instructions on page 29, “Adjustingthe Head Support”. 6 6 INCORRECT INCORRECT CORRECT

Page 29 - BEFORE; adjusting the; Adjusting the Head Support; Back of seat; to make sure it is

29 BEFORE adjusting the head support height, haveyour child lean forwardslightly. Squeeze the red adjustment button on top of seat and pull back support up until it snapsinto one of the 6 heightpositions. Adjusting the Head Support Back of seat To lower, squeeze redadjustment button and push down. C...

Page 30 - The shoulder belt; positioning clip; be attached onto the vertical

30 Securing Child in Vehicle with Shoulder Belt Positioning Clip The shoulder belt MUST lay across child’s shoulders in red zone as shown. If shoulder belt lays outside this zone, the shoulder belt positioning clip MUST be used. To attach clip to booster seat: 1. Insert the loop end of strap around ...

Page 32 - Slide the vehicle shoulder belt onto the clip as; The belt MUST NOT be twisted.

32 3. Slide the vehicle shoulder belt onto the clip as shown in and pull strap down to tighten clipagainst child’s shoulder. The lap belt portion MUST pass under the armrests and be positioned low on the hips. The belt MUST NOT be twisted. Shoulder belt positioning clip 4 4

Page 33 - For warnings on vehicle belt positions,; Rear view of child sitting in seat

33 4. For warnings on vehicle belt positions, see page 21-23, “Using your Graco Booster Seat”. Rear view of child sitting in seat 5 Shoulder belt positioning clip

Page 34 - Airplane Use; This restraint is; certified for use in an aircraft; Additional Information; put hot liquids in your; Cupholders

34 Airplane Use This restraint is NOT certified for use in an aircraft because there are no shoulder belts available in anaircraft. Additional Information To avoid burns, NEVER put hot liquids in your cupholders. Cupholders are included on both sides of the seat. Cupholders

Page 35 - Instruction Sheet Storage

35 Instruction Sheet Storage READ THIS MANUAL. Do not install or u se this car seat until you read and understand the instructions in this manual . FAILURE TO PROPERL Y USE THIS CAR SEA T INCREASES THE RISK OF SERIOUS INJUR Y OR DEA TH IN A SUDDEN ST OP OR CRASH. ©2002 Graco ISPB004HA 12/02 ENGLISH ...

Page 36 - Care and Maintenance

36 • CONTINUOUS USE OF BOOSTER SEAT MAY CAUSE DAMAGE TO VEHICLE SEAT. Use a towel or thin blanket to protect upholstery. • METAL AND PLASTIC PARTS : clean with mild soap and cool water. No bleach or detergents. • FROM TIME TO TIME CHECK YOUR BOOSTER SEAT for worn parts, torn material and stitching. ...

Page 37 - To Remove Seat Cover

37 To Remove Seat Cover 1. Remove elastic loops and hooks from seat as shown . On some models, there is a plastic clip in the front of the seat pad on the base that will need tobe removed before washing. 2. Machine wash cover in cold water on delicate cycle and drip-dry. DO NOT USE BLEACH. 3. To put...