Graco HIGH EFFICIENCY LOW PRESSURE AA2000- Manuals

Page 2 - Table of Contents

Table of Contents Safety Warnings..................................................... 3 Installation Ventilate the Spray Booth............................................ 6 Required Accessories ................................................. 6 Connect the A ir Line ..................................

Page 3 - WARNINGS; FLUID INJECTION HAZARD

WARNINGS High Pressure Spray Can Cause Serious Injury. For Professional Use Only. Observe All Warnings. Read and understand all instruction manuals before operating equipment. FLUID INJECTION HAZARD General Safety This equipment generates very high fluid pressure. Spray from the gun, leaks or ruptur...

Page 5 - EQUIPMENT MISUSE HAZARD; IMPORTANT

EQUIPMENT MISUSE HAZARD General Safety Any misuse of the equipment or accessories, such as overpressurizing, m odifying parts, using incompatible chem icals and fluids, or using worn or damaged parts, can cause them to rupture and result in serious injury, including fluid injection and splashing flu...

Page 7 - Operation

Connect the Air Line Install an air line filter (H) to ensure a clean, dry air supply to the gun. Dirt and moisture in the line can ruin the appearance of your finished piece. Instaii Air Pressure Regulator 110-776 (F) to control the air pressure to the gun and limit it to 10 psi (0.7 bar) Maximum O...

Page 11 - Troubleshooting

Troubleshooting WARNING To reduce the risk of serious injury, including fluid injection, splashing fluid or solvent in the eyes or on the skin, or injury from moving parts, always follow the Pressure Relief Procedure Warning on page 10 when ever you shut off the pump, when checking or servicing any...

Page 12 - Service

Service ■WARNING To reduce the risk of serious injury, including fluid injection, and splashing in the eyes or on the skin, or injury from m oving parts or electric shock, al ways follow the Pressure Relief Procedure Warning on page 10 before servicing any part of the gun or system. NOTE: Follow th...

Page 13 - A A

Service A A — DETAIL D — Fluid Needle Packings (47) A. A A A A A A A A A A A A A 30 SERVICE NOTES: Gasket (33) must be replaced if fluid connector (67 or 1-see page 14) is removed or replaced. Fluid leakage into air chambers may result if new gasket is not Instailed. Lubricate threads Apply anaerobi...

Page 14 - Parts

Parts A 33 ' For Direct Hose Connection (Paris shipped unassembled) SERVICE NOTES (See Fig. 7 for additional Information): A Gasket (33) must be replaced if fluid connector (67 or 1 ) is removed or replaced. Fluid leakage into air chambers may result if new gasket is not installed. A Lubricate threa...

Page 15 - Use Only Genuine Greco Parts and Accessories.; Optional Parts; Must order separately.

Parts Use Only Genuine Greco Parts and Accessories. Ref.No. Part No. Description Qty. 1 178-415 CONNECTOR, fluid (not assem bled) 1 2 106-917 ADAPTER, air 1 3 178-454 TRIGGER, gun 1 5*A 217-488 NEEDLE, fluid 1 7 217-489 VALVE, pattern adjustm ent; Includes items 62 & 63 1 10* 106-903 SPRIN G, co...

Page 16 - Accessories; Use Only Genuine Grace Parts and Accessories

Accessories Use Only Genuine Grace Parts and Accessories Fluid Filters 3000 psi (207 bar) M axim um W orking Pressure 214-570 with carbon steel bowl and support. 218-029 with aluminum bowl and support. Stainless Steel Screens 167-024 595 micron (30 mesh)167-025 250 micron (60 mesh) 167-026 149 micro...

Page 17 - pressure range

Accessories Use Only Genuine Grace Parts and Accessories Air Pressure Verification Kit 224-250 For use in checking air cap pressure at various gun inlet pressures. Do not use the air cap for spraying. Assem ble the kit as shown in the drawing below. Install the air cap on the gun. Turn on the air to...

Page 18 - Spray Tip Selection; For use in application of certain urethanes, clearcoats, and light; All these tips; replacement of

Spray Tip Selection STANDARD SPRAY TIPS Orifice Size (Inches) Inches Fan Width at 12” (300 mm) ‘Light to Medium Viscosity fl oz/mln (llters/mln) ‘Heavy Viscosity fl oz/mln (llters/mln) PartNo. 0.007 2-4(50-100) 4-6(100-150) 6-8(150-200) 8-10(200-250) 4.0 (0.1) 182-107182-207182-307 182-407 0.009 4-6...

Page 20 - The Grace Warranty and Disclaimers; labor and transportation.; and of any non-contractual; Graco makes no warranty, and disclaims all implied; Graco Phone Numbers

The Grace Warranty and Disclaimers WARRANTY Graco warrants all equipment manufactured by it and bearing its name to be free from defects in material and workmanship on the date of sale by an authorized Graco distributor to the original purchaser for use. As purchaser's sole remedy for breach of this...