Graco and 12 oz. (C04068) - Manuals

Page 2 - Contents

Contents Warnings ....................................................... .... 3 ............................................................... .......... 3 Installation................................................... ....... 4 Manual Applications ..................................... 4 Automati...

Page 3 - Warnings; WARNING

Warnings The following warnings are for the setup, use, grounding, maintenance and repair of this equipment. The exclamation point symbol alerts you to a general warning and the hazard symbol refers to procedure-speciﬁc risks. When these symbols appear in the body of this manual refer back to these ...

Page 4 - Installation; Manual Applications; Operation; Air-Powered Sealant Guns

Installation Topics Covered in this Chapter ♦ Manual Applications ♦ Automatic Appliations ♦ Air Requirements NoteRead this manual thoroughly before installing sealant gun. Inspect sealant gun for shipping damage. If damaged, notify the carrier immediately. Manual Applications The palm and pistol gri...

Page 5 - Pressure Relief Procedure

Pressure Relief Procedure This procedure describes how to relieve pressure for the sealant gun. To reduce the risk of serious injury, use this procedure whenever you shut off the sealant gun and before checking or adjusting any part of the sealant gun. 1. Shut off air supply to pump. Close any bleed...

Page 6 - Troubleshooting

Troubleshooting Problem Cause Solution Material lodged in nozzle Follow Pressure Relief Procedure, page 5 . Clear nozzle of blockage. Gun fails to dispense when trigger is actuated. Material supply, hose, passages, clogged Check material supply settings, hoses, etc. for proper material supply. Seal ...

Page 7 - Service

Service Topics Covered in this Chapter ♦ Sealant Gun Body Disassembly (C04093) ♦ Gun Handle Disassembly (C04079) ♦ Sealant Gun Reassembly (C04093) ♦ Gun Handle Assembly (C04079) Sealant Gun Body Disassembly (C04093) This procedure describes how to disassemble the sealant gun. Refer to Parts, page 8....

Page 8 - Parts; Palm Grip Guns

Parts Palm Grip Guns Included Parts and Quantity Size Gun Part No. C04093 Sealant Gun Body Assembly Retainer (21x) See Retainers Table, page 9 2.5 oz. C04074 1 (21a) 1 6 oz. C04087 1 (21b) 1 Pistol Grip Guns Included Parts and Quantity Size Gun Part No. C04093 Sealant Gun Body Assembly C04079 Gun Ha...

Page 9 - Retainers

Retainers Ref. No. Part No. Description 21a C04077 2–1/2 oz. retainer (zinc plated) 21b C04091 6 oz. retainer (zinc plated) 21c C04069 12 oz. retainer (zinc plated 309968D 9

Page 11 - Notes

Page 12 - Graco Standard Warranty; Graco Information

Graco Standard Warranty Graco warrants all equipment referenced in this document which is manufactured by Graco and bearing its name to be free from defects in material and workmanship on the date of sale to the original purchaser for use. With the exception of any special, extended, or limited warr...