Graco 824004 - Manuals - manualsarea.com

Page 2 - Warning Symbol; Caution Symbol; CAUTION; WARNING; EQUIPMENT MISUSE HAZARD

2 308645 Table of Contents Warnings 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Installation/Operation 5 . . . . . . . . . . . . . . . . . . . . . . . . . . . System Requirements 5 . . . . . . . . . . . . . . . . . . . . . . . . . . How to Use the Trigger Safety Lat...

Page 3 - INJECTION HAZARD; MOVING PARTS HAZARD; RECOIL HAZARD

308645 3 WARNING INJECTION HAZARD Spray from the gun, leaks or ruptured components can inject fluid into your body and cause extremelyserious injury, including the need for amputation. Fluid splashed in the eyes or on the skin can alsocause serious injury. D Fluid injected into the skin might look l...

Page 4 - FIRE AND EXPLOSION HAZARD; TOXIC FLUID HAZARD

4 308645 WARNING FIRE AND EXPLOSION HAZARD Improper grounding, poor ventilation, open flames or sparks can cause a hazardous condition andresult in a fire or explosion and serious injury. D If there is any static sparking or you feel an electric shock while using this equipment, stop spray- ing imme...

Page 5 - Installation/Operation; System Requirements; Grounding; How to Use the Gun Trigger Safety

308645 5 Installation/Operation System Requirements WARNING Keep the wallet-sized warning card provided withthis gun with the operator at all times. The cardcontains important treatment information should aninjection injury occur. Additional cards are availableat no charge from Graco Inc. WARNING Be...

Page 6 - How to Use the Gun; How to Adjust the Spray Pattern

6 308645 Installation/Operation How to Use the Gun 1. Connect a grounded fluid hose to the gun inlet.See Fig. 2 2. With no tip installed, start the pump. Flush thepump according to the instructions supplied with it.Prime the system with the fluid. 3. Follow the Pressure Relief Procedure on page 5. B...

Page 8 - How to Check the Gun Diffuser Operation; How to Clean the Filter

8 308645 Installation/Operation How to Check the Gun Diffuser Operation Check the diffuser operation weekly. The gun diffuser/seat (A) breaks up spray and reduces the risk of fluidinjection when the tip is not installed. Perform the testbelow. If it fails, replace the entire Needle Kit, Part No.2180...

Page 9 - How to Flush the Gun

308645 9 Installation/Operation How to Flush the Gun WARNING To reduce the risk of serious bodilyinjury, including splashing fluid in theeyes or on the skin, or static electric discharge when flushing: D Be sure the entire system, including flushingpails, are properly grounded. D Remove the tip guar...

Page 10 - Service; Disassembly; Reassembly

10 308645 Service Fig. 8 23 1 Torque to 26–32 ft-lb(35–43 N.m) A B C D 1 4 05970 NOTE: The needle (C), diffuser/seat (A), gasket (B) and locknut (D) must be replaced together. They areincluded in Repair Kit 218070. Disassembly (See Fig. 8) 1. Follow the Pressure Relief Procedure on page 5. 2. Remove...

Page 11 - Replace Swivel

308645 11 Service Replace Swivel (See Fig. 10) Disassembly 1. Follow Pressure Relief Procedure on page 5. 2. Push up on trigger guard (12) and swing triggerguard away from trigger (5). 3. Unscrew gun handle (6) from housing (26).Remove filter and clean in compatible solvent. 4. Remove swivel (15), g...

Page 12 - Parts Drawing

12 308645 Parts Drawing n 41 n 40 12 5 42 16 20 18 21 22 n 23 26 32 37 1 31 33 1 Included with 1 Model 238350, Series A Model 824004, Series A Model 239045, Series A 1 Purchase separately 2 2 6 43 15 05962 17 45 45 2 Included with 239045

Page 13 - Parts List

308645 13 Parts List Model 238350, Series A; Model 824004, Series A Ref.No. Part No. Description Qty. Ref.No. Part No. Description Qty. 1 218070 NEEDLE–DIFFUSER/SEAT KIT 1 5 238199 4-FINGER TRIGGER (standard) 1 6 195788 HANDLE, round 1 10 Y 222385 KIT, warning card 1 11 Y 187348 COVER, warning 1 12 ...

Page 14 - Accessories

14 308645 Accessories FILTERS 3000 psi (210 bar) Maximum Working Pressure. Adequate filtering is important for a good surface finishand to minimize tip clogging. Elements are available invarious mesh sizes. Filter elements and assemblies 224455 Two, 50 mesh elements, (179731) 224456 Two, 100 mesh el...

Page 16 - Graco Warranty

16 308645 Graco Warranty Graco warrants all equipment listed in this manual which is manufactured by Graco and bearing its name to be free from defects inmaterial and workmanship on the date of sale by an authorized Graco distributor to the original purchaser for use. With the exception ofany specia...