Graco 800-062 - Manuals

INSTALLATION Figure 1 TEE HANDLE (3040 ONLY) SPRAY GUN SPRAY HOSE HIGH PRESSURE HOSE CONNECTION HOSE RACK INLET WATER CONNECTION 3/4” GARDEN HOSE Check for Shipping Damage The unit should be checked for any damage that may have occurred in shipping. Any damage should be noted and the carrier notifie...

6 308-489 STARTUP Use this procedure whenever starting the pressure washer to help insure that the unit is ready to operate and starting is done safely. 1. Check oil levels. Engine: Add SAE 30 or 10W–30 weight detergent oil as necessary. Pump: Add SAE 20 or 30 weight non–detergent oil as necessary. ...

SHUTDOWN, FLUSHING AND STORAGE WARNING PRESSURE RELIEF PROCEDURE To reduce the risk of serious bodily injury , including fluid injection and splashing in the eyes, or on the skin, always follow this procedure whenever you stop spraying for more than 10 minutes, when shutting down, and before checkin...

308-489 9 TROUBLESHOOTING CHART WARNING To reduce the risk of serious bodily injury, including fluid injection, splashing in the eyes or on the skin or injury from moving parts, always follow the Pressure Relief Procedure Warning before proceeding. PROBLEM CAUSE SOLUTION Low pressure and/or pump run...

10 308-489 PARTS DRAWING 800–062 & 800–063 Hydra–Clean 2245 Pressure Washer 61 1 69 66 1 61 69 66 51 49 51 8 0 74 73 42 66 69 53 60 45 46 47 41 66 69 58 69 57 49 44 2 79 50 13 15 16 56 12 11 1410 9 8 5 4 71 69 66 66 57 78 77 67 70 64 7 66 69 62 3 66 69 71 17 75 72 6 66 69 71 25 27 29 31 36 82 35...

308-489 11 PARTS LIST 800–062 & 800–063 Hydra–Clean 2245 Pressure Washer REF PART NO. NO. DESCRIPTION QTY REF PART NO. NO. DESCRIPTION QTY 1 801–494 ENGINE, 11 HP, Briggs & Stratton I/C (For 800–063 only) 1 801–283 ENGINE, 11 HP, Wisconsin Robin (For 800–062 only) 1 2 800–326 PUMP ASSEMBLY, ...

18 308-489 PUMP SERVICE WARNING To reduce the risk of serious bodily injury , including fluid injection, splashing in the eyes or on the skin, or injury from moving parts, always follow the Pressure Relief Procedure Warning before proceeding. NOTE: The following metric wrenches are needed: M10, M13 ...

308-489 19 Servicing the V–Packings NOTE: There are two types of packing kits: one is just packings, the other includes the packings, rings and retainers. 1. Remove the manifold as outlined in the Pumping Section. 2. Carefully pull the packing retainer from the manifold. Examine the o–ring and repla...

THE GRACO WARRANTY WARRANTY AND DISCLAIMERS Graco warrants all equipment manufactured by it and bearing its name to be free from defects in material and workmanship on the date of sale by an authorized Graco distributor to the original purchaser for use. As purchaser’s sole remedy for breach of this...