Graco 3A2801D- Manuals

Page 2 - Models

Models Part No. Series Description Maximum Fluid Working Pressure 24R991 A Low Pressure Mix Manifold 300 psi (2.1 MPa, 21 bar) 24R992 A High Pressure Mix Manifold 1500 psi (10.5 MPa, 105 bar) 24T273 A High Pressure Mix Manifold, for acid-catalyzed materials 1500 psi (10.5 MPa, 105 bar) 2 3A2801D

Page 3 - Warnings; WARNING

Warnings Warnings The following warnings are for the setup, use, grounding, maintenance and repair of this equipment. The exclamation point symbol alerts you to a general warning and the hazard symbol refers to procedure-speciﬁc risks. When these symbols appear in the body of this manual or on warni...

Page 5 - Installation

Installation Installation 1. Connect the component A supply to the A side ﬁtting (19a) of the mix manifold. 2. Connect the component B supply to the B side ﬁtting (19b) of the mix manifold. 3. Connect the solvent supply to the solvent ﬁtting (20) of the mix manifold. 4. Connect the static mixer hose...

Page 6 - Repair; Disassembly

Repair Repair Disassembly 1. Flush the mix manifold before servicing. See the PD2K operation manual. 2. Relieve the pressure as described in the PD2K operation manual. Disconnect the hoses, taking note of which port (A or B) they are connected to. 3. Unscrew a plug (15) from the manifold body (1). R...

Page 7 - Reassembly

Repair Reassembly NOTE: Lubricate all o-rings when reassembling.Plug Seals Repair Kit 420011 is available. Parts included in the kit are marked with an asterisk, for example (12*). Order the kit separately.Lever Seals Repair Kit 420012 is available. Parts included in the kit are marked with a symbol...

Page 8 - Parts; Mix Manifold Kit Parts

Parts Parts Mix Manifold Kit Parts Part No. 24R991 Low Pressure Mix Manifold Kit Part No. 24R992 High Pressure Mix Manifold Kit Part No. 24T273 High Pressure Mix Manifold Kit, for acid catalyzed materials Ref. No. Part No. Description Qty 101 16W557 BRACKET, belt 1 102 16W558 BRACKET, gun/belt 1 103...

Page 9 - Mix Manifold Parts

Parts Mix Manifold Parts Part No. 16W556 Mix Manifold (used on 24R991 Kit) Part No. 17A439 Mix Manifold (used on 24R992 Kit) Part No. 16W616 Mix Manifold (used on 24T273 Kit for acid-catalyzed materials) Ref. No. Part No. Description Qty 1 — — — BODY, manifold 1 2◆ — — — O-RING; PTFE 1 3◆ — — — WASH...

Page 10 - Accessories

Accessories Accessories Part No. Description 24N641 1/8 in. (3 mm) ID Fluid Whip Hose; nylon; 6 ft (1.8 m); for high and low pressure applications. 3200 psi (22 MPa, 220 bar) Maximum Fluid Working Pressure. 24N305 1/4 in. (6 mm) ID Fluid Whip Hose; nylon; 6 ft (1.8 m); for low pressure applications ...

Page 11 - Technical Data

Technical Data Technical Data Mix Manifold U.S. Metric Maximum ﬂuid working pressure: 24R991 Low Pressure Mix Manifold 300 psi 2.1 MPa, 21 bar 24R992 High Pressure Mix Manifold 1500 psi 10.5 MPa, 105 bar 24T273 High Pressure Mix Manifold, for acid-catalyzed materials 1500 psi 10.5 MPa, 105 bar Mixin...

Page 12 - Graco Standard Warranty; Graco Information

Graco Standard Warranty Graco warrants all equipment referenced in this document which is manufactured by Graco and bearing its name to be free from defects in material and workmanship on the date of sale to the original purchaser for use. With the exception of any special, extended, or limited warr...