Graco 3A2714B- Manuals

Configuration Number Matrix Configuration Number Matrix Check the identification plate (ID) for the Configuration Number of your pump. Use the following matrix to define the components of your pump. Sample Configuration Number: 2200P-P01AP1PPPTFKPT 2200P P01A P1 PP PT FK PT Pump Model Center Section and ...

Troubleshooting Troubleshooting Problem Cause Solution Pump is running too fast, causing cavitation before prime. Reduce air inlet pressure. Check valve ball severely worn or wedged in seat or manifold. Replace ball and seat. Seat severely worn. Replace ball and seat. Outlet or inlet clogged. Unclog...

Repair Repair Pressure Relief Procedure Follow the Pressure Relief Procedure whenever you see this symbol. This equipment stays pressurized until pressure is relieved manually. To help prevent serious injury from pressurized fluid, such as splashing in the eyes or on skin, follow the Pressure Relief ...

Repair Replace Seals or Rebuild Air Valve Follow these instructions to service the air valve with one of the available repair kits. Air Valve Seal Kit parts are marked with a †. Air Valve Repair Kit parts are marked with a ♦. Air Valve End Cap Kit parts are marked with a ‡. Disassemble the Air Valve...

Repair Check Valve Repair NOTE: Kits are available for new check valve balls and seats in a range of materials. See page 27 to order kits in the material(s) desired. O-ring and fastener kits also are available.NOTE: To ensure proper seating of the check balls, always replace the seats when replacing...

Repair Diaphragm and Center Section Repair NOTE: Diaphragm kits are available in a range of materials and styles. See pages 28 – 29. A Center Rebuild Kit also is available. See page 23. Parts included in the Center Rebuild Kit are marked with an *. For best results, use all kit parts. Disassemble th...

Torque Instructions Torque Instructions If fluid cover or manifold fasteners have been loosened, it is important to torque them using the following procedure to improve sealing.NOTE: Fluid cover and manifold fasteners have a thread-locking adhesive patch applied to the threads. If this patch is exces...

Parts Parts/Kits Quick Reference Use this table as a quick reference for parts/kits. Go to the pages indicated in the table for a full description of kit contents. Ref. Part/Kit Description Qty. 1 – — — Center Section; Polypropylene, not sold separately 1 102 24V231 Air Valve; see page 24 1 Fluid Co...

Parts Center Section Sample Configuration Number Pump Model Center Section and Air Valve Fluid Covers and Manifolds Seats Balls Diaphragms Seat and Manifold Seal 2200P P01A P1 PP PT FK PT Ref Description Qty 101 HOUSING, center, not sold separately 1 102 VALVE, air, see page 24 1 103 SCREW, hi-lo stu...

Parts Air Valve Sample Configuration Number Pump Model Center Section and Air Valve Fluid Covers and Manifolds Seats Balls Diaphragms Seat and Manifold Seal 2200P P01A P1 PP PT FK PT Ref Description Qty 201 HOUSING, not sold separately 1 202 ✦ PISTON 1 205 ✦ PLATE, air valve 1 206 ✦✝ ‡ O-RING 2 207‡ ...

Parts Fluid Covers and Manifolds Sample Configuration Number Pump Model Center Section and Air Valve Fluid Covers and Manifolds Seats Balls Diaphragms Seat and Manifold Seal 2200P P01A P1 PP PT FK PT Fluid Cover Kits Polypropylene PVDF P1, P2 24V234 F2 24V240 Kits include 1 fluid cover (2) Center Mani...

Parts Seats and Check Balls Sample Configuration Number Pump Model Center Section and Air Valve Fluid Covers and Manifolds Seats Balls Diaphragms Seat and Manifold Seal 2200P P01A P1 PP PT FK PT Seat Kits PP 24V248 SS 24V250 SP 24V249 PV 24V247 Kits include:• 4 seats (7), material indicated in table....

Parts Diaphragms Sample Configuration Number Pump Model Center Section and Air Valve Fluid Covers and Manifolds Seats Balls Diaphragms Seat and Manifold Seal 2200P P01A P1 PP PT FK PT Standard Diaphragm Kits SP 24V242 FK 24V243 Kits include:• 2 diaphragms (12), material indicated in table• 1 diaphrag...

Parts Manifold Seals Sample Configuration Number Pump Model Center Section and Air Valve Fluid Covers and Manifolds Seats Balls Diaphragms Seat and Manifold Seal 2200P P01A P1 PP PT FK PT Standard Manifold O-Ring Kits All Models PTFE 24V236 Optional Manifold O-Ring KitsPTFE-Encapsulated FKM 24V978 FX...

Accessories Accessories Muffler 111897 Legacy or remote exhaust muffler option.NOTE: See DataTrak Manual 313840 for:• Pulse Count Conversion Kits 24B794 and 24B795• DataTrak Conversion Kits 24K861 and 24K862• All other data monitoring parts, including reed switches and solenoids. Replacement Air Valve...

Technical Data Technical Data Husky 2200 Diaphragm Pump US Metric Maximum fluid working pressure 125 psi 0.86 MPa, 8.6 bar Air pressure operating range 20 to 125 psi 0.14 to 0.86 MPa, 1.4 to 8.6 bar Air inlet size 3/4 in. npt(f) Air exhaust size 1 in. npt (f) Fluid inlet and outlet size (ANSI/DIN flan...

Graco Standard Husky Pump Warranty Graco warrants all equipment referenced in this document which is manufactured by Graco and bearing its name to be free from defects in material and workmanship on the date of sale to the original purchaser for use. With the exception of any special, extended, or l...