Page 2 - manual where applicable.; IMPORTANT USER INFORMATION; order by the operator.; SPRAY PRECAUTIONS; Keep clear of nozzle.; CONTENTS; Component Identification; WARNING; Pressure Washer - Parts
2 3 The following warnings are for the setup, use, grounding, maintenance, and repair of this equipment. The exclamation point symbol alerts you to a general warning and the hazard symbols refer to procedure-spe- cific risks. When these symbols appear in the body of this manual, refer back to these ...
Page 3 - lowing the pump to thaw.
4 5 • Do not direct spray on or into electrical installations of any kind! This includes electrical outlets, light bulbs, fuse boxes, transformers, etc. Severe electrical shock may occur. • Even after you shut off the unit, there is high pressure water left in the pump, hose and gun until you releas...
Page 4 - Item Description; Attire
6 7 Component Identification Item Description 1. Detergent Strainer 2. Detergent Hose 3. Water Inlet 4. Water Inlet Strainer 5. Water Outlet 6. Decal - Warning/Caution/Operation 7. Oil Sight Glass 8. Pump 9. Adjustable Unloader Knob 10. Decal - Caution: Risk Of Fire 11. Decal - Warning: Risk Of Burn...
Page 5 - NOTICE
8 9 INSTAllATION & PREPARATION INSTRUCTIONS Engine Fuel Tank Review “Fire & Ventilation Precautions” pg. 4, before fueling. Locate the Safety Decals on your unit and heed their warnings. A minimum of 86 octane fuel is recommended for use with this unit. Do not mix oil with gasoline. Purchase...
Page 6 - OPERATING INSTRUCTIONS; Priming the Pump; Unloader; Adjustable; Thermal Relief Valve
10 11 OPERATING INSTRUCTIONS Priming the Pump It is essential to prime the pump on initial start-up and each time the water supply is disconnected from the unit after initial use. 1. Lay the high pressure hose out to remove any loops. Water flow will constrict the hose, creating tight loops if the h...
Page 7 - Cleaning with Detergents
12 13 OPERATING INSTRUCTIONS Start-Up Refer to the “Safety Precautions” pgs. 3-5 before start - ing the unit. Locate the Safety Decals on your unit and heed their warnings. Never look directly into the nozzle. High pressure water creates a risk of severe injury. 1. With the gun locked in the “OFF” p...
Page 9 - Troubleshooting
17 Troubleshooting Engine will not start. Various engine problems. Refer to the engine manual accom-panying your unit. Unit components are frozen. Allow to thaw. If any part of the unit becomes frozen; excessive pres - sure may build up in the unit which could cause the unit to burst result- ing in ...
Page 12 - Pump Assembly - Parts
22 23 Pump Assembly - Parts - Series A 24E735 (for use with Model 2525DD) Pump Assembly - Parts 24E735 (for use with Model 2525DD) DESCRIPTION PART # QTY KIT, REPAIR, VALVES 24E736 6 INCLUDES 1 KIT, REPAIR, PLUNGER 24E737 3 INCLUDES 2 KIT, REPAIR, OIL SEAL 24E738 3 INCLUDES 3 KIT, REPAIR, UNLOADER 2...
Page 19 - Graco Standard Warranty; For Graco Canada Customers; Original instructions. This manual contains English. MM 3A0465; International Offices:
36 Graco Standard Warranty Graco warrants all equipment referenced in this document which is manufactured by Graco and bearing its name to be free from defects in material and workmanship on the date of sale to the original purchaser for use. With the exception of any special, extended, or limited w...