Page 2 - Warnings; WARNING
Warnings 2 309286K Warnings WARNING FIRE AND EXPLOSION HAZARD Flammable fumes, such as solvent and paint fumes, in work area can ignite or explode. To help prevent fire and explosion:• Use equipment only in well ventilated area. • Do not fill fuel tank while engine is running or hot; shut off engine...
Page 3 - TOXIC FLUID OR FUMES HAZARD; PERSONAL PROTECTIVE EQUIPMENT
Warnings 309286K 3 TOXIC FLUID OR FUMES HAZARD Toxic fluids or fumes can cause serious injury or death if splashed in the eyes or on skin, inhaled, or swallowed.• Read MSDS’s to know the specific hazards of the fluids you are using. • Store hazardous fluid in approved containers, and dispose of it a...
Page 4 - Component Identification
Component Identification 4 309286K Component Identification Key: A Hose B Hose Rack C Gun Holder D Gun and Wand E Tip Storage F Engine Oil Fill G Water Pump Oil Fill H Oil Level Site Gage J Pressure Unloader Adjustment Knob K Garden Hose Connection L High Pressure Hose Connection M Engine ON/OFF Swi...
Page 5 - Setup; Shipping Damage; Connecting High-Pressure Hose and Gun; CAUTION
Setup 309286K 5 Setup Shipping Damage Check pressure washer for shipping damage. Notify the carrier immediately if there is any damage. Connecting High-Pressure Hose and Gun Connect high-pressure hose between pump outlet and gun inlet. Both of these connections are made with quick couplers. Installi...
Page 6 - Operation; Pressure Relief Procedure
Operation 6 309286K Operation Pressure Relief Procedure Follow this procedure when you stop spraying and before cleaning, checking, servicing or transporting equipment. 1. Engage trigger lock. 2. Turn pressure washer OFF. 3. Remove ignition cap from spark plug. 4. Turn off water supply and disconnec...
Page 7 - Startup
Operation 309286K 7 Startup • Always engage the gun trigger safety latch when you stop spraying. This reduces the risk of fluid injection or splashing in eyes or on skin if the gun is bumped or triggered accidentally. Be sure latch is pushed fully down or it will not prevent the gun from being trigg...
Page 8 - Chemical Injector Operation
Operation 8 309286K 7. Move switch to ON position and set throttle to HALF throttle position. 8. Trigger gun to produce a constant stream of water and, at the same time, pull star ter rope quickly to start the engine. Pull and return rope until the engine star ts. HINT: Placing one foot on the pres-...
Page 10 - Shutdown, Flushing and Storage; STORAGE LOCATION
Shutdown, Flushing and Storage 10 309286K Shutdown, Flushing and Storage Short-term Storage (less than 30 days) • Before you store the pressure washer overnight or transport it, disconnect the water supply and CLOSE the fuel supply valve. • After each use, wipe all pressure washer surfaces with a cl...
Page 11 - Maintenance Chart
Maintenance Chart 309286K 11 Maintenance Chart Follow Pressure Relief Procedure , page 6. Interval What to do Daily • Clean water inlet screen and filter. • Check engine and pump oil levels. Fill as necessary. • Check gasoline level. Fill as necessary. After first 5 hours of operation Change engine ...
Page 12 - Troubleshooting; Problem
Troubleshooting 12 309286K Troubleshooting T Problem Cause Solution Engine will not start or it is hard to start No gasoline in fuel tank or carburetor Fill tank with gasoline, open fuel shut- off valve. Check fuel line and carbure-tor. Low oil Add oil to proper level. Engine ON/OFF switch in OFF po...
Page 14 - Valves
Pump Service: 2730B/2730H Model Pressure Washers 14 309286K Pump Service: 2730B/2730H Model Pressure Washers Repair kits are available. See the Parts List, page 18 (2730B) or page 20 (2830H). For the best results, use all parts in kits. Follow Pressure Relief Procedure , page 6. Valves For a set of ...
Page 18 - Parts
Parts 18 309286K Parts 244389, Series A - 2730B with Briggs and Stratton 6.5 HP Motor TIC
Page 23 - Sound Data; Description
Sound Data 309286K 23 244391, Series A - 3030 Honda 9 HP Motor†244392, Series A - 3340 Honda 11 HP Motor ★ 244393, Series A - 3540 Honda 13 HP Motor ✓ Sound Data Ref. No. Part No. Description Qty. 1 803900† ENGINE, gasoline, GX270, 9 HP 1 803158 ★ ENGINE, gasoline, GX340, 11 HP 1 114703 ✓ ENGINE, ga...
Page 24 - Graco Standard Warranty; Graco Information
Graco Standard Warranty 24 309286K Graco Standard Warranty Graco warrants all equipment referenced in this document which is manufactured by Graco and bearing its name to be free from defects in material and workmanship on the date of sale to the original purchaser for use. With the exception of any...