Graco 309362 - Manuals - manualsarea.com

Page 2 - List of Models

2 309362 List of Models HD = Heavy Duty CartLW = Light Weight Cart PartNo. Series Ratio / Pump Pump No. Gun Hose HD LW Maximum Fluid Working Pressure Maximum Air Input Pressure 244463 A 33:1 Bulldog 245117 X X X 20.7 MPa (207 bar) (3000 psi) .7 MPa (7.0 bar) (100 psi) 245113 A 24:1 Bulldog 245116 X ...

Page 3 - Symbols; EQUIPMENT MISUSE HAZARD; WARNING; PRESSURIZED FLUID AND INJECTION HAZARD

3 309362 Symbols When you see a symbol in the manual, for example refer to the WARNINGS on pages 3–4. WARNING INSTRUCTIONS EQUIPMENT MISUSE HAZARD Equipment misuse can cause the equipment to rupture, malfunction, or start unexpectedly and result in seriousinjury. D Read all instruction manuals, tags...

Page 4 - FIRE AND EXPLOSION HAZARD

4 309362 Symbols WARNING FIRE AND EXPLOSION HAZARD Solvent and paint fumes can ignite or explode. To help prevent a fire and explosion: D Ground the equipment and the object being sprayed. See Grounding on page 7. D Use in extremely well ventilated area. D Hold gun firmly to side of grounded pail wh...

Page 6 - Overview

6 309362 Overview Pump Air Regulator ON OFF 1 2 3 Loosen nut Tighten nut Adjust Air Air Supply Valve (Must be Bleed Type) Grounding Wire Return System

Page 7 - Grounding

7 309362 Grounding Use only electrically conductive hoses. 1. Connect ground wire clamp to a true earth ground. 2. Ground object being sprayed, fluid supply containers,solvent pails, waste pails, and all other equipment in sprayarea. Use only metal pails. Do not place on non-conductivesurface such a...

Page 8 - Setup

8 309362 Setup Complete before using the equipment for thefirst time. 1. 2. 3. 4. 5. Tools Required: 1. Two adjustable wrenches2. Non–sparking hammer or plastic mallet3. Torque wrench4. Grounding wires and clamps for pails5. Two 5 gallon metal pails 1. Ground sprayer. See page 7. 2. Check packing nu...

Page 10 - Pressure Relief

10 309362 Pressure Relief Follow steps 1–3 when you stop spraying andbefore cleaning, checking, or servicing theequipment. 1. Close bleed type air supply valve. 2. Hold gun firmly against a grounded metalpail and trigger gun. 3. Open return valve.

Page 11 - Flush

11 309362 Flush Flush before using for the first-time, changingcolors, before fluid can dry or settle out, andbefore storing the system. 1. Relieve pressure. See page 10. 2. Remove tip and guard. ...... 309092, 308438 TI1114 3. Place suction tube in solvent. FLUSH

Page 14 - Prime

14 309362 Prime 1. Shut off bleed type air supply valve. 2. Adjust air regulator by turning handle counter–clockwise. 3. Replace tip and guard. ...... 309092, 308438 TI1114 4. Place suction tube in fluid. PAINT

Page 17 - Spraying

17 309362 Spraying 1. Replace tip and guard. TI1114 2. Set air pressure regulator. 3. Slowly open bleed type air valve. 4. Test spray pattern. Read fluidmanufacturer ’s recommendations.Adjust as necessary. . . 309092, 306686, 308438

Page 19 - Maintenance; Daily

19 309362 Maintenance Daily 1. FLUSH ÏÏÏ ÏÏÏ 2. Relieve pressure. See page 10. ÏÏ ÏÏ ÏÏ 3. Check packing nut. Adjust packingsand replace TSL as necessary.Torque to 25–30 ft–lb (34–41 N S m).

Page 22 - Dimensions

22 309362 Dimensions (For mounting hole layout see air pump manual ) A B C Pump Model A mm (in.) B mm (in.) C mm (in.) Weight (approx.) kg (lbs) Bulldog 33:1 1257 (49.5) 795 (31.3) 660 (26) 236 (107) Bulldog 24:1 1257 (49.5) 795 (31.3) 660 (26) 236 (107)

Page 24 - Graco Standard Warranty; Graco Information

24 309362 Graco Standard Warranty Graco warrants all equipment manufactured by Graco and bearing its name to be free from defects in material and workmanship on thedate of sale by an authorized Graco distributor to the original purchaser for use. With the exception of any special, extended, or limit...