Graco 309098F- Manuals

Page 2 - WARNING; EQUIPMENT MISUSE HAZARD; FIRE AND EXPLOSION HAZARD

2 309098 WARNING EQUIPMENT MISUSE HAZARD Equipment misuse can cause the equipment to rupture or malfunction and result in serious injury. D This equipment is for professional use only. D Read all instruction manuals, tags, and labels before you operate this equipment. D Use the equipment only for it...

Page 3 - INJECTION HAZARD

3 309098 TOXIC FLUID HAZARD Hazardous fluids or toxic fumes can cause serious injury or death if splashed in the eyes or on theskin, inhaled, or swallowed. D Know the specific hazards of the fluid you are using. D Store hazardous fluid in an approved container. Dispose of hazardous fluid according t...

Page 4 - Unpacking; Unpacking the Product; Pump Module Overview; Pump Module Capabilities

4 309098 Unpacking Unpacking the Product The Dynastar r pump module was carefully packaged for shipment by Graco. When the package arrives,perform the following procedure to unpack the units: 1. Inspect the shipping box carefully for shippingdamage. Contact the carrier promptly if damage isdiscovere...

Page 5 - Installation; Reservoir

5 309098 Installation Reservoir Mount reservoir [Fig. 2, item (P)] on sturdy flat surfacewith 6, 3/8 in. diameter bolts. Note location of fill port(K), hydraulic lines, and lubricant outlet port (G) foreasy access once installed. Hydraulic system must depressurized beforeconnecting high pressure hyd...

Page 6 - Typical Installation

6 309098 Installation Typical Installation The installation shown in Figs. 2, 4, and 5 are only a guide for selecting and installing system components. Contactyour Graco distributor for assistance in planning a system to suit your needs. Fig. 2 Low Reservoir Level Switch (Level Indicator, optional) ...

Page 9 - Operation

9 309098 Operation Pressure Relief Procedure WARNING INJECTION HAZARD To reduce the risk of serious injury, in-cluding fluid injection or splashing in theeyes or on the skin, always follow the Pressure Relief Procedure whenever you D Are instructed to relieve the pressure D Shut off the pump D Check...

Page 10 - CAUTION; Troubleshooting

10 309098 Operation Shut Down. 1. For normal system shut down, disconnect powerto lubricator controller (J) by turning off the ignitionswitch, and turn off hydraulic supply by closing theball valve (Fig. 2, item AA). CAUTION Never allow the pump to run dry of the fluid beingpumped. A dry pump will q...

Page 11 - Parts Drawing

11 309098 Parts Drawing 1 3c 3d 3e 3f 3g 3h 3a 7 5 8 9652B Pump hydraulic outlet Pump hydraulic inlet Pump lubricant outlet 3i

Page 13 - Parts List; Dynastar Pump Module

13 309098 Parts List Model 243159, Dynastar Pump Module includes items 1 – 8 *Model 243502, 35# Dynastar Pump Module Installation Kit includes items 1, 2, 4 and 8 *Model 243503, 120# Dynastar Pump Module Installation Kit includes items 1, 2, 4and 8 *Model 243504, 400# Dynastar Pump Module Installati...

Page 16 - Graco Standard Warranty; Graco Phone Number

16 309098 Graco Standard Warranty Graco warrants all equipment manufactured by Graco and bearing its name to be free from defects in material and workmanship on thedate of sale by an authorized Graco distributor to the original purchaser for use. With the exception of any special, extended, or limit...