Graco 308769D- Manuals

Page 2 - Warning Symbol; Caution Symbol; CAUTION; WARNING; EQUIPMENT MISUSE HAZARD

2 308769 Table of Contents Warnings 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Installation 5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Operation 10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Parts 12 . ....

Page 3 - FIRE AND EXPLOSION HAZARD; TOXIC FLUID HAZARD

308769 3 WARNING FIRE AND EXPLOSION HAZARD Improper grounding, poor ventilation, open flames or sparks can cause a hazardous condition andresult in a fire or explosion and serious injury. D Ground the equipment and the object being sprayed. Refer to Grounding on page 8. D If there is any static spar...

Page 4 - PRESSURIZED EQUIPMENT HAZARD; MOVING PARTS HAZARD

4 308769 WARNING PRESSURIZED EQUIPMENT HAZARD Spray from the gun, hose leaks, or ruptured components can splash fluid in the eyes or on the skinand cause serious injury. D Do not point the gun at anyone or at any part of the body. D Do not stop or deflect leaks with your hand, body, glove or rag. D ...

Page 5 - Installation; General Information; Prepare the Operator

308769 5 Installation WARNING FIRE AND EXPLOSION HAZARD Always maintain a minimum of 1 in. clearance between rotating agitator parts and container to prevent sparks from contact. General Information NOTE: Reference numbers and letters in parentheses in the text refer to the callouts in the figures a...

Page 6 - Supplied Components

6 308769 Installation Installing the 239857 Supply Module NOTE: Refer to Fig. 1 and to the Dimension drawing on page 14 and the Mounting Hole Layout on page 15. 1. Ensure that there is at least 9 ft (2.8 m) overheadclearance for the elevator (150) when fully raised. WARNING To reduce the risk of ser...

Page 9 - Notes

Page 10 - Operation; Elevator Operation; Agitator Operation

10 308769 Operation Pressure Relief Procedure WARNING PRESSURIZED EQUIPMENT HAZARD The system pressure must be manually relieved toprevent the system from starting or spraying acci-dentally. To reduce the risk of an injury from acci-dental spray from the gun, splashing fluid, ormoving parts, follow ...

Page 12 - Parts

7686B 101 102 103 104 105 107 108 109 109 (Ref) 114 124 125 134 150 155 (Ref) 155 159 159 (Ref) 105 (Ref) B B 102 (Ref) 12 308769 Parts Part No. 239857, Series A, Supply Module

Page 14 - Dimensions

14 308769 Technical Data Category Data Maximum air input pressure 100 psi (0.7 MPa, 7 bar) Weight approximately 100 lb (45 kg) Wetted parts Back-Geared Agitator: See agitator manual 308609. Drum Cover: Stainless Steel Fluid Hoses: Nylon Dimensions 7707A 1 Ensure that there is 9 ft (2.8 m) overhead c...

Page 15 - Mounting Hole Layout

308769 15 Mounting Hole Layout 06533 0.56 in. (14.2 mm) Holes 8.88 in. (225.9 mm) 5.5 in. (140 mm)

Page 16 - Graco Standard Warranty; Graco Information

16 308769 Graco Standard Warranty Graco warrants all equipment manufactured by Graco and bearing its name to be free from defects in material and workmanship on thedate of sale by an authorized Graco distributor to the original purchaser for use. With the exception of any special, extended, or limit...