Graco 308371K - Manuals

8 308371 Operation WARNING To reduce the risk of serious bodily injury, whichcan result if the tank pressure is not fully relieved,always follow the Pressure Relief Procedure onpage 6 before opening the tank cover or fill port. 1. Fill the pressure tank as explained in the PressureTank Instruction M...

308371 9 Service WARNING To reduce the risk of serious bodily injury, includingcuts, amputation of fingers, and splashing in theeyes or on the skin, always follow the PressureRelief Procedure on page 6, shut off the agitator,and disconnect the air line before checking orrepairing the agitator. Lubri...

12 308371 Parts Drawing Apply low-strength (cyanoacrylate) threadsealant. Orient collar (4) with slots facing up and down. Orient screws (32) on collar (2) to either side ofslots on mounting collar (4). Remove original bolts, and replace with (33).Torque to 160 in-lbs (18 N-m). Locate the bottom sho...

308371 13 Parts List Stainless Steel, Heavy-Duty AgitatorsModel No. 236661, 5-gallon size Model No. 236662, 10-gallon sizeModel No. 236663, 15-gallon size Ref PartNo. No. Description Qty. Ref PartNo. No. Description Qty. 1 162425 MOTOR, air 1 2 181849 COLLAR 1 3 100828 COUPLING, flexible 1 4 220416 ...

14 308371 Technical Data Heavy-Duty Models 236661, 236662, and 236663 For fluid viscosity above 800 cps (centipoise) Air motor: air driven, gear reduced, 1/2 HP (373 W) Air pressure: 100 psi (0.7 MPa, 7 bar) maximum Gear ratio: reduced 20:1shaft rpm is 1/20 of air motor rpm Wetted parts: 304 and 316...