Graco 308243B- Manuals

Page 2 - WARNINGS; FIRE, EXPLOSION OR ELECTRIC SHOCK HAZARD

WARNINGS Serious injury, explosion, fire or electric shock can occur if the precautions below are not followed. Read and understand all instruction manuals, tags, and warning labels before operating equipment. Electrical equipment shall only be installed, operated, and serviced by trained, qualified...

Page 3 - Table of Contents

Table of Contents Warnings 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Installation 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Operation 8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Maintenance 9 . . . . . . ...

Page 4 - Installation; WARNING

Installation To reduce the risk of fire, explosion, or electricshock, all electrical equipment must only beinstalled by a qualified electrician. Never install Models PPM 3050, 3100, and 3550 ina Class I , Division 1 hazardous location. Only Mod- els PPM 3050H, 3100H, and 3550H are suitable forClass ...

Page 6 - Remote Monitoring; Class

Installation Remote Monitoring The flow meter will send an output pulse for each geartooth that passes the sensor. The actual K-factor foryour meter is marked on the data sheet included withthe meter. The approximate flow volume per one pulse(K-factor) is shown at right. METER MODEL NO. K-FACTOR PPM...

Page 7 - Remote Monitoring When Meter is in a Class

Installation Remote Monitoring When Meter is in a Class , Division 1 Hazardous Location Models PPM 3050H, 3100H, and 3550H ONLY WARNING To reduce the risk of fire and explosion and seriousinjury: Be sure to understand and follow HazardousLocation Wiring of Intrinsically Safe Circuitsinstructions. Wh...

Page 8 - Operation

Operation WARNING Pressure Relief ProcedureTo reduce the risk of serious injury, includingsplashing in the eyes or on the skin, or injury frommoving parts, fire, explosion, or electric shock,always follow this procedure when shutting off thesystem, when checking or servicing any part of thespray sys...

Page 9 - Maintenance

Maintenance CAUTION Do not immerse the meter in solvent. Solvent coulddamage the meter’s electrical components. NOTE: Clean the outside of the meter with a soft clothdampened in a compatible solvent as needed. Residue Build-up on the Meter Gears Residue build-up affects the flow meter performanceby ...

Page 10 - Cleaning or Servicing the Meter Chamber

10 308-243 Maintenance Cleaning or Servicing the Meter Chamber WARNING Installing and servicing this equipment requires ac-cess to parts that may cause electric shock or oth-er serious injury if the work is not performed prop-erly. Do not install or service this equipment unlessyou are trained and q...

Page 12 - Parts

12 308-243 Parts Use Only Genuine Graco Parts and Accessories 01384 1 9 2 3 8 5 4 11 12 10 10 Model PPM 3050Part No. 235–587 12 11 Ref.No. Part No. Description Qty. 1 110–571 ELECTRONIC SENSOR 1 2 HOUSING, upper; not a replacement part 1 3 HOUSING, lower; not a replacement part 1 4 110–573 GEAR 2 5 ...

Page 18 - Accessories

18 308-243 Accessories Use Only Genuine Graco Parts and Accessories Meter Mounting Bracket 188–330 For mounting the meter to a wall or table. Fluid Filter 223–160 5000 psi (350 bar) Maximum Working PressureWith stainless steel bowl and polyethylene support NOTE: Filter 223–160 has a 60 mesh screen. ...

Page 20 - Dimensions

Flow Meter Mounting Holes (BOTTOM VIEW) 1.73 in.(43.94 mm) M6 Dimensions 01538 DIM. C DIM. D DIM. B DIM. A DIM. C DIM. D DIM. B DIM. A 01382 1/4 npt(f) inlet/outlet 1/4 npt(f)inlet/outlet Model No. Dim. A Dim. B Dim. C Dim. D PPM 3050 4.24 in. (107.70 mm) 2.00 in. (50.80 mm) 3.33 in. (84.58 mm) 5.90...

Page 21 - Technical Data; Pressure Drop Curve; FLOW RATE

308-243 21 Technical Data Maximum Working Fluid Pressure Models PPM 3050, 3100, 3550 2000 psi (140 bar) . Models PPM 3050H, 3100H, 3550H 3000 psi . . . . . (210 bar) Flow Range Models PPM 3050/3050H 0.01–0.5 gal/min . . . . . . . (38–1900 cc/min) Models PPM 3100/3100H 0.02–1.0 gal/min . . . . . . . ...

Page 22 - Safety Barrier Specifications

Safety Barrier Specifications WARNING To maintain intrinsic safety of your installation, onlyreplace the Stahl barrier fuse with 160 mAreplacement fuse, Stahl Part No. 011239. Stahl Model No. 9002/13–280–110–00 R. Stahl, Inc.Intrinsic Safety Barrier Outputs are Intrinsically Safe for Class I, Divisi...

Page 23 - Notes

Page 24 - The Graco Warranty and Disclaimers; Graco Phone

The Graco Warranty and Disclaimers WARRANTY Graco warrants all equipment manufactured by it and bearing its name to be free from defects in material and workmanship onthe date of sale by an authorized Graco distributor to the original purchaser for use. As purchaser’s sole remedy for breach of thisw...