Graco 308237 - Manuals - manualsarea.com

Page 2 - WARNINGS; FLUID INJECTION HAZARD; MOVING PARTS HAZARD; RECOIL HAZARD

2 308237 WARNINGS High Pressure Spray Can Cause Serious Injury. For Professional Use Only. Observe All Warnings. Read and understand all instruction manuals before operating equipment. FLUID INJECTION HAZARD General Safety This equipment generates very high fluid pressure. Spray from the gun, leaks ...

Page 3 - EQUIPMENT MISUSE HAZARD; HOSE SAFETY; FIRE OR EXPLOSION HAZARD; IMPORTANT

308237 3 EQUIPMENT MISUSE HAZARD General Safety Any misuse of the spray equipment or accessories, such as overpressurizing, modifying parts, using incompatible chemiĆ cals and fluids, or using worn or damaged parts, can cause them to rupture and result in fluid injection, splashing in the eyes or on...

Page 4 - Installation/Operation; WARNING

4 308237 Installation/Operation System Requirements. WARNING Keep the walletĆsized warning card provided with this gun with the operator at all times. The card contains important treatment information should an injection injury occur. Additional cards are available at no charge from Graco Inc. WARNI...

Page 5 - How to Adjust the Spray Pattern.; How to Clean the Spray Tip; CAUTION

308237 5 How to Adjust the Spray Pattern. 1. Follow the Pressure Relief Procedure on page 2. Loosen the retaining nut (B). Turn the tip guard so the groove in the tip is horizontal (C) for a horiĆ zontal pattern and vertical (A) for a vertical pattern. Tighten the retaining nut. 2. The orifice of th...

Page 6 - How to Flush the Gun.

6 308237 Installation/Operation If using the accessory RAC IV tip guard 1. Engage the trigger safety latch. Rotate the RAC IV tip handle 180 _ . See Fig.4. 2. Disengage the safety latch. Trigger the gun into a pail or onto the ground to remove the clog. 3. Engage the safety latch. Rotate the tip han...

Page 7 - Service

308237 7 Service CAUTION Do not attempt to install an old style needle in this gun. The front of the new needle is marked with a + below the Graco symbol. Notes: Use Needle Kit 235475.Use all the new parts for the best results. Parts included in the kit are shown with one asterisk, (2a*).Keep parts ...

Page 8 - Parts

8 308237 Parts 1 2d 2a 2b 2c 8 9 10 11 12 14 6 01487 13 1 2 Lubricate, then torque to 20Ć25 ftĆlb (27Ć34 N.m) 3 4 Torque to 30Ć40 inĆlb (3.4-4.5 N.m) Purchase separately Lubricate 2 4 1 3 2 Model 235465, Series B Includes items 1 to 16 Ref No. Part No. Description Qty. Ref No. Part No. Description Q...

Page 9 - Notes

Page 10 - Accessories; FILTERS; TIP GUARDS

10 308237 Accessories FILTERS 3000 psi (210 bar) Maximum Working Pressure. Adequate filtering is important for a good surface finish and to minimize tip clogging. These filters provide secondary filtering. Various screen meshes are available. Mounts in hose 213068 Includes filter body, spring and on...

Page 11 - Manual Change

308237 11 Technical Data Maximum Working Pressure 5000 psi (350 bar) . . . . . . Fluid Orifice Size 0.037 in. (0.94 mm) . . . . . . . . . . . . . . . Wetted Parts Stainless steel, Polyethylene, . . . . . . . . . . Polyurethane, Nylon, Teflon® Maximum Fluid Temperature 150°F (71° C) . . . . . . . . ....

Page 12 - The Graco Warranty and Disclaimers

12 308237 The Graco Warranty and Disclaimers WARRANTY Graco warrants all equipment manufactured by it and bearing its name to be free from defects in material and workmanship on the date of sale by an authorized Graco distributor to the original purchaser for use. As purchaser's sole remedy for brea...