Graco 308116T- Manuals

Page 2 - Warning Symbol; Caution Symbol; CAUTION; WARNING; EQUIPMENT MISUSE HAZARD

2 308116 Table of Contents Warnings 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Typical Installation 5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Installation 6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Operation/Main...

Page 3 - SKIN INJECTION HAZARD; MOVING PARTS HAZARD

308116 3 WARNING SKIN INJECTION HAZARD Spray from the gun, leaks or ruptured components can inject fluid into your body and cause extremely serious injury, including the need for amputation. Fluid splashed in the eyes or on the skin can also cause serious injury. D Fluid injected into the skin might...

Page 4 - FIRE AND EXPLOSION HAZARD; TOXIC FLUID HAZARD

4 308116 WARNING FIRE AND EXPLOSION HAZARD Improper grounding, poor ventilation, open flames or sparks can cause a hazardous condition and re- sult in a fire or explosion and serious injury. D Ground the equipment and the object being sprayed. Refer to Grounding on page 6. D If there is any static s...

Page 5 - Typical Installation

308116 5 Typical Installation KEYA Pump B Pump Runaway Valve C Air Line Lubricator D Bleed--Type Master Air Valve (required, for pump) E Pump Air Regulator F Air Line Filter G Bleed--Type Master Air Valve (for accessories) H Air Supply Hose J Fluid Drain Valve (required) K Fluid Filter L Fluid Suppl...

Page 6 - Installation; General Information; Mounting the Pump

6 308116 Installation General Information NOTE: Reference numbers and letters in parentheses in the text refer to the callouts in the figures and the parts drawing. NOTE: Always use Genuine Graco Parts and Acces- sories, available from your Graco distributor. If you supply your own accessories, be s...

Page 7 - System Accessories

308116 7 Installation NOTE: Reference numbers and letters in parentheses in the text refer to the callouts in the figures and the parts drawing. If you supply your own accessories, be sure they are adequately sized and pressure--rated to meet the system’s requirements. The Typical Installation shown...

Page 8 - Operation/Maintenance; Flush the Pump Before First Use

8 308116 Operation/Maintenance Pressure Relief Procedure WARNING PRESSURIZED EQUIPMENT HAZARD The system pressure must be manually relieved to prevent the system from starting or spraying acci- dentally. To reduce the risk of an injury from acci- dental spray from the gun, splashing fluid, or moving...

Page 11 - Troubleshooting

308116 11 Troubleshooting WARNING To reduce the risk of serious injury whenever you are instructed to relieve pressure, always follow the Pressure Relief Procedure on page 8. 1. Relieve the pressure. 2. Check all possible problems and solutions before disassembling pump. Problem Cause Solution Pump ...

Page 12 - Service; Disconnecting the Displacement Pump; Reconnecting the Displacement Pump

12 308116 Service Disconnecting the Displacement Pump 1. Flush the pump if possible. Stop the pump at the bottom of its stroke. Follow the Pressure Relief Procedure on page 8. 2. Disconnect the air and fluid hoses. Remove the pump from its mounting. Note the relative position of the pump’s fluid out...

Page 13 - Displacement Pump Service

308116 13 Service Displacement Pump Service Disassembly When disassembling the pump, lay out all removed parts in sequence, to ease reassembly. Refer to Fig 5. NOTE: Standard Repair Kit 224401 (UHMWPE/PTFE packings) is available. For the best results, use all the new parts in the kit. Parts included...

Page 15 - Parts; 0:1 Ratio President Pump

308116 15 Parts Model 224342, Series A 10:1 Ratio President Pump Includes items 101--111 0194 101 102 103 111 n 110 n 108 Ref Part No. No. Description Qty 101 224341 DISPLACEMENT PUMP ASSY. See pages 18--19 for parts 1 102 102021 NUT, lock; 3/8--16; stainless steel 3 103 166237 ROD, tie; stainless s...

Page 16 - :1 Ratio Monark Pump

16 308116 Parts Model 224343, Series A (shown) 5:1 Ratio Monark Pump Includes items 101--111 Model 261630, Series A 5:1 Ratio Monark Pump Includes items 101--111 0196B 101 102 103 111 n n 110 108 Ref Part No. No. Description Qty 101 224341 DISPLACEMENT PUMP ASSY. for Model 224343 only; See pages 18-...

Page 19 - Optional PTFE Packing Conversion

308116 19 Parts Model 224341, Series A Severe-Duty, UHMWPE/PTFE Packed Stainless Steel Displacement Pump Includes items 1--31 Model 254999, Series A Severe-Duty, UHMWPE/PTFE Packed Stainless Steel Displacement Pump Includes items 1--33 Ref. No. Part No. Description Qty. Ref. No. Part No. Description...

Page 20 - Severe-Duty, PTFE Packed Stainless Steel Displacement Pump

20 308116 Parts Model 15G976, Series A Severe-Duty, PTFE Packed Stainless Steel Displacement Pump Includes items 1--31 2 *14 *5 *11 1 n 10 13 *21 *3 28 19* 27* 20* 25* 26 8 9 4* 12 n 15 7 6* 0190C 31* 4*

Page 24 - Dimensions; Mounting Hole

24 308116 Dimensions Model 224342 Shown A C 1/2 npt(f) FLUID OUTLET B 3/4 npt(f) FLUID INTAKE 1/2 npt(f) AIR INLET 0195 Pump Model A B C 224342 28.38 in. (721 mm) 14.63 in. (372 mm) 13.75 in. (349 mm) 224343 902147 247147 25.25 in. (641 mm) 11.5 in. (292 mm) 13.75 in. (349 mm) 261630 26.25 (667 mm) ...

Page 25 - Notes

Page 26 - Graco Standard Warranty; Graco Information

26 308116 Graco Standard Warranty Graco warrants all equipment manufactured by Graco and bearing its name to be free from defects in material and workmanship on the date of sale to the original purchaser for use. With the exception of any special, extended, or limited warranty published by Graco, Gr...