Graco 308048K- Manuals

Page 2 - Symbols; Warning Symbol; Notice Symbol; NOTICE; WARNING; EQUIPMENT MISUSE HAZARD

308048 2 Symbols Warning Symbol WARNING This symbol alerts you to the possibility of seriousinjury or death if you do not follow the instructions. Notice Symbol NOTICE This symbol alerts you to the possibility of damage toor destruction of equipment if you do not follow thecorresponding instructions...

Page 3 - SKIN INJECTION HAZARD

308048 3 WARNING SKIN INJECTION HAZARD Spray from the gun, hose leaks or ruptured components can inject fluid into your body and causeextremely serious injury, including the need for amputation. Fluid splashed in the eyes or on the skincan also cause serious injury. Fluid injected into the skin migh...

Page 4 - FIRE AND EXPLOSION HAZARD; TOXIC FLUID HAZARD

308048 4 WARNING FIRE AND EXPLOSION HAZARD Improper grounding, poor ventilation, open flames or sparks can cause a hazardous condition andresult in a fire or explosion and serious injury. Ground the equipment and the object being sprayed. Refer to Grounding on page 6. If there is any static sparking...

Page 5 - Installation; Maximum Hydraulic Input Pressure

308048 5 Installation WARNING Maximum Hydraulic Input Pressure The maximum safe hydraulic input pressure to thismotor depends on the pressure rating of the dis-placement pump to which it is connected. Refer to the lower manual and the pump manualfor the maximum fluid working pressure and theratio. N...

Page 6 - Grounding

308048 6 Installation Grounding WARNING For your safety, read the FIRE AND EXPLOSIONHAZARD WARNINGS on page 4, and groundyour entire system as instructed below. This sec-tion also includes details on how to connect thegrounding wire and clamp to the various hydraulicmotors. Proper grounding is an es...

Page 7 - Service; Pressure Relief Procedure

308048 7 Service Pressure Relief Procedure WARNING SKIN INJECTION HAZARDThe system pressure must be manuallyrelieved to prevent the system fromstarting or spraying accidentally. Fluid under high pressure can be injected through theskin and cause serious injury. To reduce the risk ofan injury from in...

Page 12 - Parts

308048 12 Parts Model 223646, Series B 04466 52 44 47 51 50 48 53 *49 55 55a 54 54a 7a 7 5 6 6a 4 58 45* 37 46 36 35 *45 38 37 *32 26 30 *17 31 34 27 28 56 54 54a 3 3a 1 20 16 11 25 24* 23* 29 57 33* 33* 24* 2 15 14 21* 13 12 19 18 A A NOTE: See the service section for importanttorque and lubricatio...

Page 14 - Dimensions

308048 14 Mounting Hole Layout 1 3 4 2 5 Four 0.437 in. (11.1 mm) dia. mounting holes 3.712 in. (9.45 cm) 3.464 in. (8.79 cm) 4.0 in. (9.84 cm) 2.0 in. (5.08 cm) Three 5/8–11 UNC (2B) tapped holes Gasket 161806 is not shown. Order Separately 1 2 3 4 5 02589 2 6 6 7 Dimensions 1 3 4 2 1 in. npt Outle...

Page 15 - Technical Data

308048 15 Technical Data Category Data Maximum hydraulic fluid input pressure 1500 psi (10 MPa, 103 bar). Also see the WARNING onpage 5. Maximum hydraulic fluid flow 12 gpm (45.6 liter/min) Hydraulic fluid consumption 1 gal. (3.8 liter) per 5 cycles Effective piston area 4.9 sq. in. (31.6 cm 2 ) Pis...

Page 16 - Graco Warranty and Limitation of Liability; Graco Information

308048 16 Graco Warranty and Limitation of Liability Graco warrants all equipment listed in this manual which is manufactured by Graco and bearing its name to be free from defects inmaterial and workmanship on the date of sale by an authorized Graco distributor to the original purchaser for use. Wit...