Graco 308-230 - Manuals - manualsarea.com

Page 2 - Warning Symbol; Caution Symbol; CAUTION; EQUIPMENT MISUSE HAZARD; WARNING; WARNING

Table of Contents Warnings 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Installation 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Operation 10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Parts 12 . . . . . . . ...

Page 3 - TOXIC FLUID HAZARD; FIRE AND EXPLOSION HAZARD

TOXIC FLUID HAZARD Hazardous fluid or toxic fumes can cause serious injury or death if splashed in the eyes or on the skin, inhaled, or swallowed. Know the specific hazards of the fluid you are using. Store hazardous fluid in an approved container. Dispose of hazardous fluid according to all local, ...

Page 4 - Installation; Assembling Pail Mount Units

4 308-230 Installation Assembling Pail Mount Units 1. Insert the suction tube (27) into the elbow (15) to its full depth. Tighten the nut securely. See Fig. 1. 2. Insert the recirculation tube (28) into the connector (16) to its full depth. Tighten the nut securely. 3. On Models 236–870 and 224–833,...

Page 5 - Assembling the Wall Mount Unit

308-230 5 Installation Assembling the Wall Mount Unit Install the wall bracket (2) 5 ft (1.52 m) above the floor. Use the mounting hole layout shown on page 18. Be sure the wall is strong enough to support the weight of the pump and hoses, any accessories, the fluid, and stress caused by pump operat...

Page 6 - General Information; Accessories; Hose Connections

6 308-230 Installation General Information 1. The Typical Installations shown on pages 7 and 8 are only a guide for selecting and installing sys- tem components. Contact your Graco distributor or Graco Technical Assistance (see back page) for assistance in planning a system to suit your needs. 2. Al...

Page 10 - Operation; Pressure Relief Procedure; Flush the Pump Before First Use

10 308-230 Operation Pressure Relief Procedure PRESSURIZED EQUIPMENT HAZARD The system pressure must be manually relieved to prevent the system from starting or spraying acci- dentally. To reduce the risk of an injury from acci- dental spray from the gun, splashing fluid, or mov- ing parts, follow t...

Page 11 - Pump Shutdown; Flushing and Storage; Recirculation Line

308-230 11 Operation Pump Shutdown WARNING To reduce the risk of serious injury whenever you are instructed to relieve pressure, always follow the Pressure Relief Procedure on page 10. At the end of the work shift, relieve the pressure. Flushing and Storage WARNING To reduce the risk of serious inju...

Page 12 - Parts

12 308-230 Parts Model 236–412, Series A Includes items 1–42 Ref Part No. No. Description Qty Ref Part No. No. Description Qty 1 D31–331 PUMP, Husky 307; SST/ r ; See 308–553 for parts 1 2 235–505 COVER, pail; stainless steel 1 3 111–276 THUMBSCREW; 5/16–18 unc; 1” (25.4 mm) long; sst 3 4 104–119 SC...

Page 18 - Dimensions; Wall Mounting

18 308-230 Dimensions Pail is not included. Maximum pail outer diameter is 12.125 in. (308 mm). 13.1 in. (332.7 mm) 15.1 in. (383.5 mm) Pail is not included. Maximum pail outer diameter is 12.125 in. (308 mm). 13.1 in. (332.7 mm) Model 236–412 Models 236–870 and 224–833 17.5 in. (444.5 mm) Wall Moun...

Page 20 - The Graco Warranty and Disclaimers; Graco Phone Number

The Graco Warranty and Disclaimers Graco warrants all equipment listed in this manual which is manufactured by Graco and bearing its name to be free from defects in material and workmanship on the date of sale by an authorized Graco distributor to the original purchaser for use. With the exception o...