Page 2 - Warning Symbol; Caution Symbol; CAUTION; FIRE AND EXPLOSION HAZARD; WARNING
2 307614 Table of Contents Warnings 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Installation/Operation 5 . . . . . . . . . . . . . . . . . . . . . . . . . . . System Requirements 5 . . . . . . . . . . . . . . . . . . . . . . . . . . How to Use the Trigger Safety Lat...
Page 4 - EQUIPMENT MISUSE HAZARD
4 307614 EQUIPMENT MISUSE HAZARD Equipment misuse can cause the equipment to rupture or malfunction and result in serious injury. This equipment is for professional use only. Read all instruction manuals, tags, and labels before operating the equipment. Use the equipment only for its intended purpos...
Page 5 - Installation/Operation; System Requirements; Grounding
307614 5 Installation/Operation System Requirements WARNING Keep the wallet-sized warning card provided withthis gun with the operator at all times. The cardcontains important treatment information should aninjection injury occur. Additional cards are availableat no charge from Graco Inc. WARNING Be...
Page 6 - How to Use the Gun; How to Adjust the Spray Pattern
6 307614 Installation/Operation How to Use the Gun 1. Connect a grounded fluid hose to the gun inlet.See Fig. 2 2. With no tip installed, start the pump. Flush thepump according to the instructions supplied with it.Prime the system with the fluid. 3. Follow the Pressure Relief Procedure on page 5. B...
Page 8 - How to Check the Gun Diffuser Operation; How to Clean the Filter
8 307614 Installation/Operation How to Check the Gun Diffuser Operation Check the diffuser operation weekly. The gun diffuser/seat (A) breaks up spray and reduces the risk of fluidinjection when the tip is not installed. Perform the testbelow. If it fails, replace the entire Needle Kit, Part No.2180...
Page 9 - How to Flush the Gun
307614 9 Installation/Operation How to Flush the Gun WARNING To reduce the risk of serious bodilyinjury, including splashing fluid in theeyes or on the skin, or static electric discharge when flushing: Be sure the entire system, including flushingpails, are properly grounded. Remove the tip guard an...
Page 10 - Service; Disassembly; Reassembly
10 307614 Service Fig. 7 23 1 2 Torque to 26–32 ft-lb (35–43 N.m) A B C D 1 4 Torque to 80–90 in-lb(9–10 N.m) NOTE: The needle (C), diffuser/seat (A), gasket (B) and locknut (D) must be replaced together. They areincluded in Kit 218070. Disassembly (See Fig 7 ) 1. Follow the Pressure Relief Procedur...
Page 12 - Parts Drawing
12 307614 Parts Drawing 03013 41 40 3 2 12 5 4 6 13 14 15 16 20 19 18 21 22 23 26 32 37 1 31 33 1 Included with 1 Model 220955, Series D Includes items 1 and 4 to 41 Model 235990, Series C Includes items 1 to 39 Model 217593, Series E Includes items 1 to 39 Model 820165, Series D Includes items 1 to...
Page 13 - Parts List
307614 13 Parts List Model 220955, Series D; Model 235990, Series C; Model 217593, Series E; Model 820165, Series D Ref.No. Part No. Description Qty. Ref.No. Part No. Description Qty. 1 218070 NEEDLE–DIFFUSER/SEAT KIT 1 2 166969 GASKET, tip (used with flat tips only) 1 3 220251 TIP GUARD 1 4 100421 ...
Page 14 - Accessories; FILTERS; SWIVELS and WHIP HOSES
14 307614 Accessories FILTERS 3000 psi (210 bar, 21 MPa) Maximum Working Pressure. Adequate filtering is important for a good surface finishand to minimize tip clogging. These filters providesecondary filtering. Elements are available in variousmesh sizes. Mounts in hose 213068 Includes filter body,...
Page 16 - Graco Warranty
16 307614 Graco Warranty Graco warrants all equipment listed in this manual which is manufactured by Graco and bearing its name to be free from defects inmaterial and workmanship on the date of sale by an authorized Graco distributor to the original purchaser for use. With the exception ofany specia...