Graco 306982ZAA- Manuals

Page 2 - Symbols; Warning Symbol; Caution Symbol; CAUTION; WARNING; EQUIPMENT MISUSE HAZARD

2 306982 Symbols Warning Symbol WARNING This symbol alerts you to the possibility of seriousinjury or death if you do not follow the instructions. Caution Symbol CAUTION This symbol alerts you to the possibility of damage toor destruction of equipment if you do not follow theinstructions. WARNING EQ...

Page 3 - SKIN INJECTION HAZARD

3 306982 WARNING SKIN INJECTION HAZARD Spray from the gun, leaks or ruptured components can inject fluid into your body and cause extremelyserious injury, including the need for amputation. Fluid splashed in the eyes or on the skin can alsocause serious injury. D Fluid injected into the skin is a se...

Page 4 - FIRE AND EXPLOSION HAZARD; TOXIC FLUID HAZARD

4 306982 WARNING FIRE AND EXPLOSION HAZARD Improper grounding, poor ventilation, open flames or sparks can cause a hazardous condition and re-sult in a fire or explosion and serious injury. D Ground the equipment and the object being sprayed. Refer to Grounding on page 5. D If there is any static sp...

Page 5 - Installation; General Information

5 306982 Installation General Information NOTE: Reference numbers and letters in parenthesesin the text refer to the callouts in the figures and theparts drawing. NOTE: Always use Genuine Graco Parts andAccessories, available from your Graco distributor. Grounding WARNING FIRE AND EXPLOSION HAZARDBe...

Page 6 - Pressure Relief Procedure

6 306982 Installation Pressure Relief Procedure WARNING SKIN INJECTION HAZARDFluid under high pressure can be in-jected through the skin and cause serious injury. To reduce the risk of an injury from injection, splashing fluid, or movingparts, follow the Pressure Relief Procedurewhenever you D Are i...

Page 7 - Operation; Restarting a Stalled Air Motor

7 306982 Operation NOTE: See your separate pump manual for detailedoperation instructions. Restarting a Stalled Air Motor CAUTION Never exceed 180 psi (1.2 MPa, 12 bar) air supplypressure to the air motor. Exceeding this pressuremay cause the air motor to stall with the air transfervalves stuck at m...

Page 8 - Service; Servicing the Air Motor

8 306982 Service Servicing the Air Motor Before you Start D Be sure you have all necessary parts on hand. AirMotor Repair Kit 207385 includes repair parts forthe motor. Use all the parts in the kit for bestresults. Parts included in the air motor kit aremarked with double asterisks (**) in text andd...

Page 11 - Throat Packing Service for In-Line Pump Model 205647

11 306982 Service Throat Packing Service for In-Line Pump Model 205647 The piston in the air motor, located behind the airmotor plates, moves when air is supplied to themotor. Moving parts can pinch or amputate yourfingers or other body parts. Therefore, neveroperate the pump with the air motor plat...

Page 13 - Throat Packing Service for In-Line Pump Model 206078

13 306982 Service Throat Packing Service for In-Line Pump Model 206078 The piston in the air motor, located behind the airmotor plates, moves when air is supplied to themotor. Moving parts can pinch or amputate yourfingers or other body parts. Therefore, neveroperate the pump with the air motor plat...

Page 14 - Parts

14 306982 Parts Model 205647, Series Mfor in-line mounting, medium-pressure oil pump 1 2 3 *4 5 6 7 8 *9 10* 13 14 15 16 17 18** 19 **20 21** 24 25 27** 27** 28** 29 30** 31 32 33 34 35 36 33 37** 38** 53 54 57 58

Page 25 - Technical Data

25 306982 Technical Data Maximum inbound air pressure 180 psi (1.2 MPa, 12 bar) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Effective piston area 14 sq. in. (90 cm @ ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...