Graco 306796H- Manuals

Page 2 - Warning Symbol; Caution Symbol; CAUTION; WARNING; SKIN INJECTION HAZARD; TOXIC FLUID HAZARD

2 306796 Table of Contents Warnings 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Installation 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Operation 6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Service 10 ...

Page 3 - FIRE AND EXPLOSION HAZARD; EQUIPMENT MISUSE HAZARD

3 306796 WARNING FIRE AND EXPLOSION HAZARD Improper grounding, poor air ventilation, open flames, or sparks can cause a hazardous condition andresult in fire or explosion and serious injury. D Ground the equipment and the object being sprayed. See Grounding on page 4. D Provide fresh air ventilation...

Page 4 - Installation

4 306796 Installation Grounding WARNING FIRE AND EXPLOSION HAZARD Before operating, ground the system asexplained below. Also read the section FIRE AND EXPLOSION HAZARD on page 3. To reduce the risk of static sparking, ground all thedispensing equipment used or located in the workarea. Check you loc...

Page 6 - Operation

6 306796 Operation Pressure Relief Procedure WARNING INJECTION HAZARD Fluid under high pressure can be in-jected through the skin and cause serious injury. To reduce the risk of an injury from injection, splashing fluid, or movingparts, follow the Pressure Relief Procedure whenever you: D are instru...

Page 7 - How to use the Safety Knob

7 306796 Operation WARNING To reduce the risk of serious injury whenever youare instructed to relieve pressure, always follow the Pressure Relief Procedure on page 6. Whenever you stop spraying for a moment, engagethe gun safety latch. See Fig. 2. WARNING The wallet-size warning card provided with t...

Page 8 - Adjusting the Spray Pattern; Cleaning or Clearing the Spray Tip

8 306796 Operation Adjusting the Spray Pattern WARNING To reduce the risk of a fluid injection injury, neveruse the gun with the tip guard or trigger guardremoved. To adjust the orientation of the spray pattern, relieve the pressure . Engage the safety latch, and loosen the tip guard retaining nut (...

Page 9 - Flushing the Gun; Lubrication

9 306796 Operation Flushing the Gun WARNING To reduce the risk of serious injury whenever youare instructed to relieve pressure, always follow the Pressure Relief Procedure on page 6. WARNING Before flushing, be sure the entire system andflushing pails are properly grounded. Refer to Grounding on pa...

Page 10 - Service; Disassembly; Reassembly

10 306796 Service WARNING To reduce the risk of serious injury whenever youare instructed to relieve pressure, always follow the Pressure Relief Procedure on page 6. NOTES: D If the gun keeps spraying after you release thetrigger, the valve rod (needle) may be obstructed,worn or damaged, or it may n...

Page 11 - Adjusting the Needle

11 306796 Service Adjusting the Needle WARNING Proper adjustment of the needle is essential to besure the safety knob makes the gun inoperativewhen engaged. Improper adjustment may allow thegun to be triggered, even with the safety knobengaged (turned fully clockwise), which can resultin serious inj...

Page 12 - Parts

12 306796 Parts Model 206408, Series H 7415A 3 26 4 25 9 10six v-packings 11 12 13 1 2 27 14 15 16 18 19 20 21 22 23 RefNo. Part No. Description Qty. Ref.No. Part No. Description Qty. 1 104301 CAPSCREW, soc hd, 5–40UNC-2a x 0.625” 1 2* 151395 WASHER, flat 1 3* 168845 GASKET, copper 2 4 210170 STOP, ...

Page 14 - Graco Warranty; Graco Information

14 306796 Graco Warranty Graco warrants all equipment listed in this manual which is manufactured by Graco and bearing its name to be free from defects inmaterial and workmanship on the date of sale by an authorized Graco distributor to the original purchaser for use. With the exception ofany specia...