Page 2 - Ultra Clear
Failure to follow these warnings and the assembly instructions could result in serious injury or death. This device is designed only to monitor the sounds of your child. It will not alert you to your child’s silent activities. When using the monitor, you must still provide the supervision necessary ...
Page 3 - Parent Unit; Battery Installation
Parent Unit • Remove the battery door cover on the Parent Unit with a key or flat blade screw driver. • Place 3-AAA (1.5V-LR03) batteries into the battery compartment. Note the proper orientation of the batteries. • Do not mix old and new batteries. • Do not mix alkaline, standard (carbon zinc), or ...
Page 4 - Low Battery Indication; Setting Up the Baby Monitor
Low Battery Indication Parent Unit • If operated too long on a low battery, you may also experience a poor signal and the Power LED on the front of the parent unit may change from green to red. • You may either turn off the unit, plug in the A/C adapter. Out of Range Indication • If the Parent Unit ...
Page 5 - Operation; To Listen To Baby; Testing the System; Vibration Alert Feature
It is VERY IMPORTANT to test the system when first set up, and at regular times thereafter. Test the units if you suspect they may have been damaged or have not been used for a long time. 1. If two adults are present, have one take the Parent Units to different locations, trying various volume setti...
Page 6 - TroubleShooting
Most problems have a simple solution. First, check that: • Power is turned ON for both units • Both units are plugged in (or batteries are fresh in Parent Unit) • Electrical outlet works • Volume is turned up on Parent Unit • Parent Unit is in range of the Nursery Unit No Sound • Battery dead or wea...
Page 7 - Características del producto; Registro del producto
2L01VIB/2L02VIB Ultra Clear Características del producto Unidad para padres (PD141837)Modelo 2L01 - 1 unidadModelo 2L02 - 2 unidads Clip Luces indicadorasde sonido Adaptador de corriente alternada Modelo 2L01 - Cant. 2 Modelo 2L02 - Cant. 3 ©2010 Graco PD142728B 4/10 Unidad del dormitorio (PD141818)...
Page 8 - resultar en lesiones serias o la muerte.
2 No observar estas advertencias y las instrucciones de armado podría resultar en lesiones serias o la muerte. Este dispositivo ha sido diseñado solamente para monitorizar los sonidos de su niño. No le enviará alertas sobre las actividades silenciosas de su niño. Cuando se usa el monitor, debe propo...
Page 9 - Unidad para padres; ADVERTENCIA; Declaración de la Comisión Federal de Comunicaciones:
Unidad para padres • Saque la puerta de las pilas de la unidad para padres con una llave o destornillador plano. • Ponga 3 pilas tamaño AAA (1,5V-LR03) en el compartimiento de las pilas. Note la orientación correcta de las pilas. • No mezcle pilas viejas con nuevas. • No mezcle pilas alcalinas, está...
Page 10 - Indicador de pilas descargadas; Selección de canales; Uso de los adaptadores de
Indicador de pilas descargadas Unidad para padres • Si funcionó durante mucho tiempo con una pila descargada, también podría experimentar una señal pobre y el diodo electroluminiscente de luz al frente de la Unidad para padres podrá cambiar de verde a rojo. • Puede apagar la unidad, enchufar el adap...
Page 11 - Para escuchar al bebé; Prueba del sistema
Instalación del monitor del bebé 1. Para obtener un mejor funcionamiento, es mejor usar nuevas pilas en la Unidad para padres. 2. Ponga la Unidad del dormitorio dentro de una distancia de 10 pies (3 metros) de su bebé. Enchufe un adaptador de corriente alternada en el enchufe del costado de la Unida...
Page 12 - Función de alerta con vibración; Función de la luz nocturna; La mayoría de los problemas tienen; SOLUCION DE DESPERFECTOS
6 • Para activar la función de alerta con vibración, ponga el interruptor del costado de la unidad para padres en la posición ENCENDIDO (ON). Función de alerta con vibración • Para encender la luz nocturna (NightLight), deslice el botón del costado de la unidad para el dormitorio hacia arriba. Funci...