Graco 288513 - Manuals

Warnings 6 311937G 14. If the diffuser (5) was removed, trigger the gun while you reinstall the diffuser with the gun tool (30). Tighten thediffuser securely to obtain a good seal. Torque to 155-165in-lb (18-19 N.m). When properly tightened, the flange willbottom out on the gun. 15. Install tip (33)...

Warnings 311937G 7 Fluid Tube Replacement (16) 1. Remove the air inlet fitting(17) using the gun tool (30)and remove the screw (20)using a 3/16 in. hex wrench. 2. Unscrew the fluid inlet fitting(25). Remove and clean orreplace the inline fluid filter(24). 3. Unscrew fluid tube connector(16a) from fl...

Parts 8 311937G Parts ▲ Replacement Danger and Warning labels, tags, and cards are available at no cost. ◆ Included in Needle/Seat Repair Kit 255160 (purchase separately) † Included in RAC Guard Kit 288839 *Included in Seal Repair Kit 249422 (purchase separately) ‡ If you want to remove the filter, ...

Technical Data 311937G 9 Technical Data *All readings were taken with fan valve fully closed, (full fan size) at 20 psi (140 kPa, 1.4 bar) and 100 psi (0.7 kPa, 7bar) and at the assumed operator position. Sound Power tested to ISO 9614-2. Maximum Working Fluid Pressure..................................

All written and visual data contained in this document reflects the latest product information available at the time of publication. Graco reserves the right to make changes at any time without notice. For patent information, see www.graco.com/patents 2ULJLQDOLQVWUXFWLRQV This manual contains Englis...