Graco 24G621- Manuals

Troubleshooting Problem Solution The speed controller does not adjust for a change in load, or shuts off before the knob (16) is turned all the way down. Remove the needle (13). and liberally lubricate the needle and o-ring (33) with multi-purpose lithium based grease. The speed controller does not ...

Repair NOTE: To repair the agitator, see your separate agitator manual.NOTE: Repair Kit 24J886 is available. Order the kit separately. Kit parts are marked with an asterisk, for example (3*). For the best results use all the parts in the kit.NOTE: Use multi-purpose lithium based grease where ever lu...

Kit Parts The kit contains all necessary parts and tools to install the agitator speed controller. Ref. No. Description Qty 1 HOUSING, lower, speed controller 1 2 HOUSING, upper, speed controller 1 3* BALL BEARING 1 4 SHAFT, drive 1 5 BAR, mounting 2 6 SCREW, machine, pan-head; 8–32 x 3/4 in. (19 mm...

Technical Data Maximum air supply pressure 100 psi (0.7 MPa, 7 bar) Minimum air supply pressure 70 psi (0.5 MPa, 4.9 bar) Maximum speed 1000 rpm Maximum speed controller air temperature 130°F (55°C) Main air inlet size 1/8 npt quick-disconnect fitting Speed control range 100–1000 rpm Diameter 4 in. (...

Graco Standard Warranty Graco warrants all equipment referenced in this document which is manufactured by Graco and bearing its name to be free from defects in material and workmanship on the date of sale to the original purchaser for use. With the exception of any special, extended, or limited warr...