Graco 224854 Series D - Manuals

Page 2 - Symbols; Warning Symbol; Caution Symbol; CAUTION; WARNING; EQUIPMENT MISUSE HAZARD

2 308175 Symbols Warning Symbol WARNING This symbol alerts you to the possibility of seriousinjury or death if you do not follow the instructions. Caution Symbol CAUTION This symbol alerts you to the possibility of damage toor destruction of equipment if you do not follow theinstructions. WARNING IN...

Page 3 - FIRE AND EXPLOSION HAZARD; MOVING PARTS HAZARD

308175 3 WARNING FIRE AND EXPLOSION HAZARD Improper grounding, poor ventilation, open flames, or sparks can cause a hazardous condition andresult in a fire or explosion and serious injury. D Ground all equipment. Refer to Grounding on page 5. D If there is any static sparking or you feel an electric...

Page 4 - Installation; Air Requirements; Installing the Agitator

4 308175 Installation WARNING FIRE AND EXPLOSION HAZARDAlways maintain a minimum of 1 in. clearance between rotating agitator parts and container to prevent sparks from contact. air line lubricator agitator motor air line filter air regulator and gauge mix tank (reference only) Typical Installation ...

Page 5 - Grounding

308175 5 Installation Grounding Proper grounding is an essential part of maintaining asafe system. To reduce the risk of static sparking, all electricallyconductive objects or devices in the spray area mustbe properly grounded. Check your local electrical codefor detailed grounding instructions for ...

Page 6 - Operation; Operating the Agitator; Checking Fluid Viscosity

6 308175 Operation WARNING MOVING PARTS HAZARDTo reduce the risk of serious injury, in-cluding cuts, amputation of fingers, andsplashing in the eyes or on the skin: D Always shut off the mixer and disconnect the airline before checking or repairing the mixer. Operating the Agitator 1. Fill the fluid...

Page 7 - Service; Flushing; Servicing; Lubricating the Air Motor

308175 7 Service WARNING MOVING PARTS HAZARDTo reduce the risk of serious injury, in-cluding cuts, amputation of fingers, andsplashing in the eyes or on the skin: D Always shut off the mixer and disconnect the airline before checking or repairing the mixer. D Wear eye protection. WARNING FIRE AND EX...

Page 8 - Parts; Helix Mixer

8 308175 Parts 0907B 1 3 4 2 1 6 1a 3 4 5 7 n 8 9 n 10 11 17 16 Ref. No. 11Needle ValveIncludes items 11a–11f 11a 11b 11c 11e 11d 0911B 22 20 1 2 3 4 1 Torque to 80–100 in-lbs (9–11.3 N S m). Apply medium grade sealant to external threads. Torque to 34–40 in-lbs (4–4.5 N S m). Be sure air motor shaf...

Page 11 - Dimensions

308175 11 Parts Model 235534 Twistork t Helix Mixer Stainless Steel, Includes items 1 to 22 Ref.No. Part No. Description Qty. 1* 111310 MOTOR, air; Includes item 1a 1 1a 113779 S MUFFLER, exhaust 1 3 101682 SCREW, cap, sch; 1/4–20 x 0.625 3 4 235535 HOUSING, outlet, stainless steel 1 5 235530 SHAFT,...

Page 12 - Technical Data

12 308175 Technical Data Maximum Working Pressure 100 psi (7 bar) . . . . . . . . . Maximum Recommended Agitator Speed 800 rpm . . . . Air Consumption At 800 rpm with 100 psi (7 bar) air inlet pressure: 5 scfm (0.14 m # /min.) At 400 rpm with 100 psi (7 bar) air inlet pressure: 2 scfm (0.06 m # /min...

Page 13 - Notes