Graco 224348 - Manuals - manualsarea.com

Page 2 - Warning Symbol; Caution Symbol; CAUTION; WARNING; EQUIPMENT MISUSE HAZARD

2 308118 Table of Contents Warnings 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Installation 5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Operation 9 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Troubleshoo...

Page 3 - SKIN INJECTION HAZARD

3 308118 WARNING SKIN INJECTION HAZARD Spray from the gun/valve, hose leaks, or ruptured components can inject fluid into your body andcause extremely serious injury, including the need for amputation. Fluid splashed in the eyes or on theskin can also cause serious injury. Fluid injected into the sk...

Page 4 - FIRE AND EXPLOSION HAZARD; TOXIC FLUID HAZARD

4 308118 WARNING FIRE AND EXPLOSION HAZARD Improper grounding, poor ventilation, open flames or sparks can cause a hazardous condition andresult in a fire or explosion and serious injury. Ground the equipment and the object being sprayed. Refer to Grounding on page 5. If there is any static sparking...

Page 5 - Installation; Grounding

5 308118 Installation Grounding WARNING FIRE AND EXPLOSION HAZARDBefore operating the pump, ground thesystem as explained below. Also readthe section FIRE AND EXPLOSIONHAZARD on page 4. To reduce the risk of static sparking, ground the pump.Check your local electrical code for detailed groundinginst...

Page 6 - Typical Installation

6 308118 Installation KEY A Pump B Pump Runaway Valve C Air Line Lubricator D Bleed–Type Master Air Valve (required, for pump) E Pump Air Regulator F Air Line Filter G Bleed–Type Master Air Valve (for accessories) H Air Supply Hose J Fluid Drain Valve (required) K Fluid Filter L Fluid Supply Hose M ...

Page 7 - System Accessories; Mounting Accessories

7 308118 Installation NOTE: Reference numbers and letters in parenthesesin the text refer to the callouts in the figures and theParts Drawing. NOTE: Contact you Graco distributor for availableGraco accessories. If you supply your own accesso-ries, be sure they are adequately sized and pressure-rated...

Page 8 - Notes

Page 9 - Operation; Pressure Relief Procedure; Flush the Pump Before Using

9 308118 Operation Pressure Relief Procedure WARNING SKIN INJECTION HAZARDFluid under high pressure can be in-jected through the skin and cause serious injury. To reduce the risk of an injury from injection, splashing fluid, or movingparts, follow the Pressure Relief Procedurewhenever you: are instr...

Page 10 - Starting and Adjusting the Pump; Shutdown and Care of the Pump

10 308118 Operation Starting and Adjusting the Pump WARNING To reduce the risk of serious injury whenever youare instructed to relieve pressure, always follow thePressure Relief Procedure on page 9. See the Typical Installation on page 6. Be sure theair regulator (E) and bleed-type master air valve ...

Page 13 - Troubleshooting

13 308118 Troubleshooting WARNING To reduce the risk of serious injury whenever youare instructed to relieve pressure, always follow thePressure Relief Procedure on page 9. Before servicing this equipment always make sure torelieve the pressure. Check all possible problems and solutions beforedisass...

Page 14 - Service; Disconnecting the Displacement Pump; Reconnecting the Displacement Pump

14 308118 Service Disconnecting the Displacement Pump WARNING To reduce the risk of serious injury whenever youare instructed to relieve pressure, always follow thePressure Relief Procedure on page 9. 1. Flush the pump, if possible. Stop the pump at thebottom of its stroke. Relieve the pressure. 2. ...

Page 15 - Displacement Pump Service

15 308118 Service Displacement Pump Service Disassembly When disassembling the pump, lay out all removedparts in sequence to ease reassembly. See Fig. 4. NOTES Standard Repair Kit 224403 (UHMWPE/PTFEpackings) is available. For the best results, use allthe new parts in the kit. Parts included in the ...

Page 18 - Parts

18 308118 Parts Model 224348, Series C10:1 Ratio President Pump Model 256713, Series A10:1 Ratio President Pump (1.5 in. Female Inlet) Includes items 101–112 REF PARTNO. NO. DESCRIPTION QTY 101 224349 } DISPLACEMENT PUMP ASSYSee pages 20 and 21 for parts 1 256712* DISPLACEMENT PUMP ASSY, 1.5 in.fema...

Page 23 - Fluid Outlet Pressure Chart; Air Consumption Chart

23 308118 Technical Data (10:1 President) Fluid Outlet Pressure Chart 0 200 400 600 800 1000 1200 1400 1600 1800 0 1 2 3 4 5 PUMP DELIVERY (Test Fluid: No. 10 Motor Oil) PUMP OUTLET PRESSURE 100 20 40 60 CPM 80 3.8 7.6 11.4 15.2 19.0 GPMl/min A B C 7.0, 70 4.2, 42 PSI 5.6, 56 2.8, 28 8.4, 84 11.0, 1...

Page 26 - Dimensions

26 308118 Pump Model A B C 224348 57.31 in. 14.63 in. 42.68 in. (1456 mm) (372 mm) (1084 mm) 256713 58.19 in. 14.63 in. 43.56 in. (1478 mm) (372 mm) (1106 mm) 224350 54.28 in. 11.60 in. 42.68 in. (1379 mm) (295 mm) (1084 mm) 256714 55.16 in. 11.60 in. 43.56 in. (1401 mm) (295 mm) (1106 mm) Model 224...