Graco 220575 - Manuals - manualsarea.com

Page 2 - Warning Symbol; Caution Symbol; CAUTION; WARNING; EQUIPMENT MISUSE HAZARD

2 307745 Table of Contents Warnings 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Setup Grounding 5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Positioning the Unit 5 . . . . . . . . . . . . . . . . . . . . . . . . . . System Accessories 5 . . ...

Page 3 - MOVING PARTS HAZARD

307745 3 WARNING MOVING PARTS HAZARD D The air motor piston can pinch or amputate your fingers. D The rotating blades of the agitator can pinch or amputate your fingers or other body parts and cancause splashing in the eyes or on the skin. D Always shut off the agitator and disconnect the air line b...

Page 4 - FIRE AND EXPLOSION HAZARD; TOXIC FLUID HAZARD

4 307745 WARNING FIRE AND EXPLOSION HAZARD Improper grounding, poor ventilation, open flames or sparks can cause a hazardous condition andresult in a fire or explosion and serious injury. D Ground the equipment and the object being sprayed. Refer to Grounding on page 5. D If there is any static spar...

Page 5 - Setup; Positioning the Unit

307745 5 Setup NOTES: D Reference numbers and letters in parentheses inthe text refer to the callouts in the figures and theparts drawing. D Accessories are available from your Graco repre-sentative. If you supply your own accessories, besure they are adequately sized and pressure-ratedto meet the s...

Page 6 - Connecting the Unit and Accessories

6 307745 Setup The installation shown in Fig. 2 is only a guide for selecting and installing system components and accessories.Contact your Graco representative for assistance in designing a system to suit your particular needs. Connecting the Unit and Accessories D Ground the unit as described in G...

Page 7 - Operation; Flushing

307745 7 Operation Pressure Relief Procedure WARNING PRESSURIZED EQUIPMENT HAZARD The system pressure must be manually relieved toprevent the system from starting or spraying acci-dentally. To reduce the risk of an injury from acci-dental spray from the gun, splashing fluid, ormoving parts, follow t...

Page 8 - Adjusting the Unit; Starting and Adjusting the Pump

8 307745 Operation 8. Shut off the air to the pump, open the bleed–typemaster air valve, and open the drain valve (K).Leave the solvent in the system overnight or, ifpossible, all weekend. 9. Start the pump and circulate it again for 30 min-utes. Raise the pump out of the solvent and let itdry to fo...

Page 9 - Shutdown and Care of the Pump

307745 9 Operation Shutdown and Care of the Pump WARNING To reduce the risk of serious injury whenever youare instructed to relieve pressure, always follow the Pressure Relief Procedure on page 7. Never allow paint to dry in the pump and lines. To shutdown the system 1. Relieve the pressure. Stop th...

Page 10 - Parts Drawing

10 307745 Parts Drawing c Fig. 3 1 or 5 2 3 6 (MONARK PUMP SHOWN) 10 9 8 11 Model 230993, Series B 2:1 Ratio Monark Carbon Steel 55 Gallon Drum SystemIncludes items 2 to 6, and 11 Model 230992, Series B 4:1 Ratio President Carbon Steel 55 Gallon Drum SystemIncludes items 1 to 4, and 6 to 12 7 12

Page 11 - Parts List

307745 11 Parts List Model 230992, Series B 4:1 Ratio President Carbon Steel 55 Gallon Drum SystemIncludes items 1 to 4, and 6 to 12 Model 230993, Series B 2:1 Ratio Monark Carbon Steel 55 Gallon Drum SystemIncludes items 2 to 6, and 11 Ref.No. Part No. Description Qty. 1 223183 4:1 RATIO PRESIDENT ...

Page 14 - Notes

Page 16 - Graco Standard Warranty; Graco Information

16 307745 Graco Standard Warranty Graco warrants all equipment manufactured by Graco and bearing its name to be free from defects in material and workmanship on thedate of sale to the original purchaser for use. With the exception of any special, extended, or limited warranty published by Graco,Grac...