Graco 208008 - Manuals - manualsarea.com

Page 2 - Warning Symbol; Caution Symbol; CAUTION; WARNING; EQUIPMENT MISUSE HAZARD; TOXIC FLUID HAZARD

2 307010 Table of Contents Setup 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Installation 5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Operation 6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Troubles...

Page 3 - FIRE AND EXPLOSION HAZARD; SKIN INJECTION HAZARD

307010 3 WARNING FIRE AND EXPLOSION HAZARD Improper grounding, poor air ventilation, open flames, or sparks can cause a hazardous condition andresult in fire or explosion and serious injury. D Ground the equipment and the object being sprayed. See Grounding on page 4. D Provide fresh air ventilation...

Page 4 - Setup

4 307010 Setup Pressure Relief Procedure WARNING PRESSURIZED EQUIPMENT HAZARD The system pressure must be manuallyrelieved to prevent the system fromstarting or spraying accidentally. To reduce the risk of an injury from accidental sprayfrom the gun, splashing fluid, or moving parts,follow the Press...

Page 5 - Installation

307010 5 Installation WARNING To reduce the risk of serious injury,whenever you are instructed to relievepressure, follow the Pressure Relief Procedure on page 4. SKIN INJECTION HAZARD NOTE: Numbers and letters in parentheses in the text correspond to the reference numbers and letters in thetext and...

Page 6 - Operation

6 307010 Operation WARNING To reduce the risk of serious injury,whenever you are instructed to relievepressure, follow the Pressure Relief Procedure on page 4. Whenever you stop spraying for a moment, en-gage the gun safety latch. See Fig. 2. SKIN INJECTION HAZARD WARNING The wallet-sized warning ca...

Page 7 - Adjust the Spray Pattern; Cleaning and Clearing the Spray Tip; Flushing the Gun

307010 7 Operation WARNING To reduce the risk of serious injury,whenever you are instructed to relievepressure, follow the Pressure Relief Procedure on page 4. SKIN INJECTION HAZARD Adjust the Spray Pattern 1. To adjust the spray pattern, relieve the pressure . Engage the safety latch and loosen the...

Page 8 - Troubleshooting

8 307010 Troubleshooting If the gun leaks at the swivel (21) , see Swivel Repair , below. If the gun leaks at the nozzle , try adjusting the trigger free play. See Needle Adjustment on page 9. If the leakage is not stopped, the needle (10) or valveseat (8) may need to be replaced. See Gun Repair on ...

Page 9 - Service; Swivel Repair; Needle Adjustment

307010 9 Service WARNING To reduce the risk of serious injury,whenever you are instructed to relievepressure, follow the Pressure Relief Procedure on page 4. SKIN INJECTION HAZARD Swivel Repair 1. Relieve the pressure . 2. Unscrew the swivel stud (21) from the gun. Re-move the spring (22), glands (2...

Page 10 - Gun Repair

10 307010 Service WARNING To reduce the risk of serious injury,whenever you are instructed to relievepressure, follow the Pressure Relief Procedure on page 4. SKIN INJECTION HAZARD Gun Repair (See Fig. 6) NOTE: Repair kit 208328 is available for the needle packings. Use all the parts in the kit for ...

Page 11 - Parts

307010 11 Parts 8103 2 10 18 *8 9 3 5 5 19 21 †25 †23 †24 22 26 17 7 16 6 31 30 1 4 14 *13 *12 *11 27 29 28 3/8 npt(f) 1/4 npt(f)

Page 12 - Tip Selection Charts

12 307010 Parts Ref No. Part No. Description Qty Ref No. Part No. Description Qty 1 203953 SCREW, hex hd cap; w/nylonlocking pellet; no. 10–24 x 3/8 1 2 208028 BODY, valve 1 3 101690 WRENCH, hex key; for 0.125 in.(3.18 mm) hex socket in needle 1 4 102931 NUT, hex mach; no. 8–32 1 5 104836 SCREW, pan...

Page 13 - Technical Data

307010 13 Technical Data Maximum Working Pressure 1000 psi (6.9 MPa, 69 bar) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Wetted Parts Stainless Steel, PTFE, Brass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....

Page 14 - Graco Standard Warranty; Graco Information

14 307010 Graco Standard Warranty Graco warrants all equipment referenced in this document which is manufactured by Graco and bearing its name to be free fromdefects in material and workmanship on the date of sale by an authorized Graco distributor to the original purchaser for use. With theexceptio...