Graco 1100 - Manuals - manualsarea.com

Page 2 - Warning Symbol; Caution Symbol; CAUTION; WARNING; EQUIPMENT MISUSE HAZARD

2 308415 Table of Contents Warnings 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Setup 5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Operation 8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Parts 12 ....

Page 3 - SKIN INJECTION HAZARD

3 308415 WARNING SKIN INJECTION HAZARD Spray from the gun, hose leaks or ruptured components can inject fluid into your body and causeextremely serious injury, including the need for amputation. Fluid splashed in the eyes or on the skincan also cause serious injury. D Fluid injected into the skin mi...

Page 4 - FIRE AND EXPLOSION HAZARD; TOXIC FLUID HAZARD

4 308415 WARNING FIRE AND EXPLOSION HAZARD Improper grounding, poor ventilation, open flames or sparks can cause a hazardous condition andresult in a fire or explosion and serious injury. D Ground the equipment and the object being sprayed. Refer to Grounding on page 5. D If there is any static spar...

Page 5 - Setup; General Information; Grounding

5 308415 Setup General Information NOTE: Reference numbers and letters in parenthesesin the text refer to the callouts in the figures and theparts drawing. NOTE: Always use Genuine Graco Parts and Acces-sories, available from your Graco distributor. Refer tothe Product Data Sheet for your pump, Form...

Page 6 - Supplied Components; Connect the Suction Hose

6 308415 Setup Supplied Components Refer to Fig. 2. WARNING A red-handled bleed-type master air valve (30) anda fluid drain valve (D) are supplied. These accesso-ries help reduce the risk of serious injury, includingfluid injection and splashing of fluid in the eyes oron the skin, and injury from mo...

Page 8 - Operation; Pressure Relief Procedure; Flush the Pump Before First Use

8 308415 Operation Pressure Relief Procedure WARNING SKIN INJECTION HAZARDThe system pressure must be manuallyrelieved to prevent the system fromstarting or spraying accidentally. Fluid under high pressure can be injected through theskin and cause serious injury. To reduce the risk ofan injury from ...

Page 9 - Prime the Pump; Set the Air and Fluid Pressure

9 308415 Operation CAUTION To avoid tip-over, the cart must be on a flat and levelsurface. Failure to follow this caution could result ininjury or equipment damage. Prime the Pump 1. See Fig. 3. Remove the tip guard and spray tipfrom the gun (102). See the gun instruction manu-al. 2. Close the air r...

Page 10 - Shutdown and Care of the Pump; Flushing

10 308415 Operation Shutdown and Care of the Pump WARNING To reduce the risk of serious injury whenever youare instructed to relieve pressure, always follow thePressure Relief Procedure on page 8. For overnight shutdown, stop the pump at the bottomof its stroke to prevent fluid from drying on the ex...

Page 12 - Parts

12 308415 Parts Part No. 236489, Series B (includes items 1–78)Part No. 237158, Series B (includes items 1–106) Ref.No. Part No. Description Qty. Ref.No. Part No. Description Qty. 1 236932 PUMP, Premier, 74:1 ratio;See manual 308357 for parts 1 4 236943 CART, portableIncludes replacement items 4a–4d...

Page 14 - Technical Data

14 308415 Technical Data Category Data Maximum fluid working pressure 50.0 MPa, 500 bar (7252 psi) Maximum air input pressure 0.67 MPa, 6.7 bar (97 psi) Ratio 74:1 Pump performance data See pump manual 308357 Air consumption data See pump manual 308357 Air inlet size 1 in. npsm(f) Fluid outlet size ...

Page 15 - Dimensions

15 308415 Dimensions A B C 05902C Pump Model A B C Width Across Wheels Weight 236489 1270 mm (50 in.) 864 mm (34 in.) 864 mm (34 in.) 737 mm (29 in.) 138 kg (305 lb) 237158 1270 mm (50 in.) 864 mm (34 in.) 864 mm (34 in.) 737 mm (29 in.) 148 kg (325 lb)