Graco 1035 - Manuals - manualsarea.com

Page 2 - WARNING; HIGH PRESSURE SPRAY CAN CAUSE SERIOUS INJURY.; General Safety

WARNING HIGH PRESSURE SPRAY CAN CAUSE SERIOUS INJURY. FOR PROFESSIONAL USE ONLY. OBSERVE ALL WARNINGS. Read and understand all instruction manuals before operating equipment. FLUID INJECTION HAZARD General Safety This pressure washer generates very high fluid pressure. Spray from the gun, leaks or r...

Page 3 - GROUNDING INSTRUCTIONS; DANGER; GROUND FAULT CIRCUIT INTERRUPTER PROTECTION

3 GROUNDING INSTRUCTIONS This product must be grounded. If it should malfunction or break down, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This equipment is equipped with a cord having an equipment–grounding conductor and a grounding plug...

Page 4 - HOSE SAFETY; ALL FLUID HOSES MUST HA VE STRAIN RELIEFS; MOVING PARTS HAZARD; Pressure Relief Procedure; TERMS; IMPORTANT

4 HOSE SAFETY High pressure fluid in the hoses can be very dangerous. If the hose develops a leak, split or rupture due to any kind of wear , damage or misuse, the high pressure spray emitted from it can cause a fluid injection injury or other serious bodily injury or property damage. ALL FLUID HOSE...

Page 5 - INSTALLATION; Check for Shipping Damage

5 INSTALLATION Figure 1 PUMP DIP- STICK HIGH PRESSURE HOSE CONNECTION 2 x 1/2” NPT(f) WATER CONNECTION 2 x 1” NPT(f) PUMP OIL LEVEL INDICATOR WINDOW Water supply tank, gun & wand assem- bly, hose assembly and motor starter are not included. Check for Shipping Damage Check the unit for any damage...

Page 6 - STARTUP; CAUTIONS; CAUTION

6 6ą308-534 STARTUP Use this procedure whenever starting the pressure washer to help insure that the unit is ready to operate and starting is done safely. 1. Check the oil level. Pump: Add SAE 20 or 30 weight non–detergent oil as necessary. 2. Turn on the water supply. CAUTION Never run the unit dry...

Page 8 - SHUTDOWN, FLUSHING AND STORAGE; PRESSURE RELIEF PROCEDURE; MAINTENANCE

8 SHUTDOWN, FLUSHING AND STORAGE WARNING PRESSURE RELIEF PROCEDURE To reduce the risk of serious bodily injury , including fluid injection and splashing in the eyes, or on the skin, always follow this procedure whenever you stop spraying for more than 10 minutes, when shutting down, and before check...

Page 9 - TROUBLESHOOTING CHART; injury from moving parts, always follow the; Pressure Relief Procedure Warning

9 308-534ą9 TROUBLESHOOTING CHART WARNING To reduce the risk of serious bodily injury, including fluid injection, splashing in the eyes or on the skin, or injury from moving parts, always follow the Pressure Relief Procedure Warning before proceeding. PROBLEM CAUSE SOLUTION Low pressure and/or pump ...

Page 10 - PUMP SERVICE; Valves; Figure 4

10 10ą308-534 PUMP SERVICE WARNING To reduce the risk of serious bodily injury , including fluid injection, splashing in the eyes or on the skin, or injury from moving parts, always follow the Pressure Relief Procedure Warning before proceeding. NOTE: The following metric wrenches are needed: M10, M...

Page 12 - PARTS DRAWING

12 12ą308-534 PARTS DRAWING 800–906 Hydra–Clean 735 Pressure Washer 800–907 Hydra–Clean 1035 Pressure Washer 2 5 4 3 23 12 11 15 14 13 33 37 36 35 34 31 9 10 32 9 29 16 17 21 22 27 26 18 19 25 20 30 28 38 24 9 8 7 6 21 22 27 26 18 19 25 20 28 1 10 8 9

Page 13 - PARTS LIST; gpm

13 308-534ą13 PARTS LIST 800–906 Hydra–Clean 735 Pressure Washer 800–907 Hydra–Clean 1035 Pressure Washer REF PART NO. NO. DESCRIPTION QTY 1 800–643 CHASSIS 1 2 803–788 BELT GUARD 1 3 801–940 SCREW, Cap, hex hd., 5/16–18 x 1 5 4 100–214 WASHER, Lock, 5/16 5 5 100–023 WASHER, Flat, 5/16 5 6 801–817 M...

Page 18 - ACCESSORIES; HOSE ASSEMBLY WITH QUICK COUPLERS 800–375

18 18ą308-534 ACCESSORIES (Must be purchased separately) DOWNSTREAM CHEMICAL INJECTOR KIT 800–117 BRASS UP TO 5.5 GPM (21 LPM) 800–425 BRASS 5.6 TO 10.8 GPM (21 TO 41 LPM) 800–649 STAINLESS STEEL UP TO 5.5 GPM (21 LPM) For injecting harsh cleaning chemicals downstream from the pump. INLET PRESSURE R...

Page 19 - TECHNICAL DATA; PTFE

19 TECHNICAL DATA Model 800–909 Model 800–908 Model 800–907 Model 800–906 Motor (Totally Enclosed Fan Cooled)Electrical Service Water Pump Maximum Working PressureWater Pump Maximum FlowUnit WeightDimensions Length Width Height Maximum Inlet Water TemperatureInlet Hose ConnectionOutlet Hose Connecti...

Page 20 - THE GRACO WARRANTY; IMPORTANT PHONE NUMBERS

20 THE GRACO WARRANTY WARRANTY AND DISCLAIMERS Graco warrants all equipment manufactured by it and bearing its name to be free from defects in material and workmanship on the date of sale by an authorized Graco distributor to the original purchaser for use. As purchaser’s sole remedy for breach of t...