Goodman GHS8 - Manuals - manualsarea.com

Page 2 - PRODUCT IDENTIFICATION; AIRFLOW DIRECTION; Brand; AIRFLOW

PRODUCT IDENTIFICATION 2 The model and manufacturing number are used for positive identification of component parts used in manufacturing. Pleaseuse these numbers when requesting service or parts information. Installation and repair of this unitshould be performed ONLY by individuals meeting the req...

Page 3 - * These models available in Low NOx

3 PRODUCT IDENTIFICATION The model and manufacturing number are used for positive identification of component parts used in manufacturing.Please use these numbers when requesting service or parts information. * These models available in Low NOx The United States Environmental Protection Agency (“EPA...

Page 4 - PRODUCT DESIGN; for servicing; High Altitude Derate; Pressure; WARNING; III

4 PRODUCT DESIGN NFPA 54/ANSI Z223.1 - latest edition. In Canada, the fur-naces must be vented in accordance with the National Stan-dard of Canada, CAN/CSA B149.1 and CAN/CSA B149.2 -latest editions and amendments. NOTE: The vertical height of the Category I venting system must be at least as great ...

Page 5 - PRODUCT DIMENSIONS; MODEL

5 PRODUCT DIMENSIONS MODEL A B GHS80453AXC* 14 1/2" 12 1/2" GHS80704BXC* 17 1/2" 16" GHS80905CXC* 21" 19 1/2" MODEL A B GDS80453AXC* GDS80703AXC* GDS80904BXC* 17 1/2" 16" GDS81155CXC* 21" 19 1/2" 14 1/2" 12 1/2"

Page 6 - RO LLO UT L IMI T SW IT CHES

6 PRODUCT DESIGN GHS8 For installations in Canada, the GHS furances are certified only to 4,500 ft. * Negative pressure readings are in inches of water column (*w.c.) Part Number B1370145 Open Setting (° F) 300 GHS 80453AXC* 2 GHS 80704BXC* 2 GHS 80905CXC* 2 RO LLO UT L IMI T SW IT CHES Part Number ...

Page 7 - Presssure Sw itches; Part Number; PRI MARY L IMI T; Part Number; AUXI LIARY LIM IT SWI TCHES

7 PRODUCT DESIGN GDS8 Part Number B1370145 Open Setting (° F) 300 GDS 80453AXC* 2 GDS 80703AXC* 2 GDS 80904BXC* 2 GDS 81155CXC* 2 RO LLO UT L IMI T SW IT CHES M odel Pa rt No. Ope ns* GDS804 53AX C* B13 70142 -0.60 GDS807 03AX C* B1 37158 -0.70 GDS809 04BX C* B13 70142 -0.60 GDS811 55CX C* B1 37158 ...

Page 8 - A large array of Amana; Coil Matches (for Goodman; PRO DUCT

8 PRODUCT DESIGN Coil Matches: A large array of Amana ® brand coils are available for use with the GHS8 furnaces, in horizontal applications and for the GDS8 for downflow applications. These coils are available in both cased and uncased models (with the option of a fieldinstalled TXV expansion devic...

Page 9 - Upflow Filters; BOTTOM RETURN; Disposable Minimum Filter Area (in; Based on a 300 ft/min filter face velocity]; *Minimum filter area dictated by heating airflow requirement.; Permanent Minimum Filter Area (in

9 PRODUCT DESIGN Thermostats: NOTE: Complete lineup of thermostats can be found in the Thermostat Specification Sheets. Filters: Filters are required with this furnace and must be provided by the installer. The filters used must comply with UL900 orCAN/ULCS111 standards. Installing this furnace with...

Page 10 - Counterflow Filters; Filters can also be installed elsewhere

10 PRODUCT DESIGN Counterflow Filters "A" Min Return Air Optional Access Door This furnace has provisions for the installation of return air filters at the counterflow top return. The furnace will accommodatethe following filter sizes depending on cabinet size: Refer to Minimum Filter Area t...

Page 11 - FURNACE SPECIFICATIONS; MOD EL

FURNACE SPECIFICATIONS 11 Unit specifications are subject to change without notice. ALWAYS refer to the unit's serial plate for the most up-to-date general and electrical information. NOTES: * These furnaces are manufactured for natural gas operation. Optional Kits are available for conversion to pr...

Page 13 - BLOWER PERFORMANCE SPECIFICATIONS; BLOW ER P ER FORMAN CE

13 BLOWER PERFORMANCE SPECIFICATIONS GHS8 NOTES: • CFM in chart is without filter(s). Filters do not ship with this furnace, but must be provided by the installer. • All furnaces ship as high-speed cooling. Installer must adjust blower cooling speed as needed. • For most jobs, about 400 CFM per ton ...

Page 14 - B LO WER PERFOR MANC E

BLOWER PERFORMANCE SPECIFICATIONS 14 GDS8 NOTES: • CFM in chart is without filter(s). Filters do not ship with this furnace, but must be provided by the installer. • All furnaces ship as hig-speed cooling. Installer must adjust blower cooling speed as needed. • For most jobs, about 400 CFM per ton w...

Page 15 - TEMPER

15 BLOWER PERFORMANCE SPECIFICATIONS 30 4 0 50 60 70 80 9 0 11 0 1 2 0 10 0 13 0 1 4 0 15 0 10 0 90 80 70 60 50 40 30 20 10 OUT P UT B T U/H R x 10 00 BT U O U T P U T v s T E M PER AT U R E RI S E C H AR T TEMPER ATUR E RISE 60 0 C F M 70 0 90 0 10 0 0 11 0 0 12 0 0 14 0 0 16 0 0 18 0 0 20 0 0 22 0...

Page 16 - WIRING DIAGRAMS

16 WIRING DIAGRAMS Wiring is subject to change, always refer to the wiring diagram on the unit for the most up-to-date wiring. HIGH VOLTAGE!DISCONNECT ALL POWER BEFORE SERVICING OR INSTALLING THISUNIT. MULTIPLE POWER SOURCES MAY BE PRESENT. FAILURE TODO SO MAY CAUSE PROPERTY DAMAGE, PERSONAL INJURY ...

Goodman GHS8 - Manuals

Manuals:

Manual Goodman GHS8

Summary

Goodman Manuals