Generac 1276-1 - Manuals

TRANSFER TO GENERATOR POWER SOURCE WHENUTILITY POWER FAILS 1. Set the generator’s 50 amp circuit breaker to its OFF (or open) position. 2. Turn OFF the utility power supply to the transfer switch using the means provided (such as a utility main line circuit breaker or supplementary 70 amp circuit br...

8. From the inside of the house, feed the end of the 30-foot conduit (INCLUDED and pre-wired from transferswitch) through the wall to outside. 9. Remove the threaded lock nut from the conduit coupling. 10. Remove the knock out in the lower right corner ofthe external connection box.From the rear of ...

NOTE: Balance must be maintained when moving circuitlocations from main electrical distribution panel toemergency load center. Circuit breaker positionsalternate buss bars vertically. Circuits sharing a neutralwire should either be moved together to adjacentpositions in emergency load center or not ...

An added feature of the GENERAC ® Generator Ready Kit is the ability to hook up a GUARDIAN ® ULTRA SOURCE portable generator. Included in the kit is a 5 foot electrical power cord (black & red), neutral (white) and ground (green) wires. Atone end are the terminal connectors. At the other end is ...